• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.2
• /
• pp.133-139
• /
• 2010

PC camera-based instant messenger have problems of video image break/delay and noise. The reason is caused by a composed problem that PC Camera is belong to the connected PC and operating in the PC. This research suggests an instant messenger that uses network camera connected to LAN instead of PC camera. Therefore, the instant messenger has a component that the camera is separated from PC. This research designs sequence diagram, video calls flow chart, and graphic user interface of the instant messenger. The instant messenger based on network camera provides high quality video calls service and makes it possible to call from a special remote site with real-time video image.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.279-281
• /
• 2003

We analysed the operating properties of resistive type superconducting fault current limiters (SFCLs) based on YBCO thin films with a single line-to-ground fault. When a single line-to-ground fault occurred, the short circuit current of a fault phase increased up to about 6 times of transport currents immediately after the fault instant and was effectively limited to the designed current level within 2 ms by the resistance development of the SFCL. The fault currents of the sound phases almost did not change because of their direct grounding system. The unsymmetrical rates of a fault phase were distributed from 6.4 to 1.4. It was found that the unsymmetrical rates of currents were noticeably improved within one cycle after the fault instant. We calculated the zero phase currents for a single line-to-ground fault using the symmetrical component analysis. The positive sequence resistance was reduced remarkably right after the fault but eventually approached the balanced positive resistance component prior to the system fault. This means that the system reaches almost the three-phase symmetrical state in about 60 ㎳ after the fault. The ground currents were almost 3 times of the zero phase mts since most of the fault currents flowed through the grounding line.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.567-575
• /
• 2015

An improvement in the current fed parallel resonant half bridge (CFPRHB) circuits used in fluorescent lamp electronic ballasts is provided in this paper. The CFPRHB belongs to the self-oscillating family which includes the current fed push-pull and series resonant inverters, most of which are used in instant-start applications. However, many failure modes are related to the bypass capacitor according to an analysis of failed samples. In this paper, the operating functions of the existing topology in the steady state are analyzed and the main root cause of failure modes has been found. Comparisons between the two topologies are conducted in terms of the voltage stress of the bypass capacitor as well as the thermal and performance of the ballasts to verify the advantages of the proposed topology. It is found that the improved topology is capable of enhancing the reliability and reducing the cost of products without having a negative influence on the system performance.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.255-262
• /
• 2010

Recently, we are living in the world of information and ubiquitous technology strayed away from the fixed network systems resulting in an increase of using mobile terminals which is convenient for mobility and functionality. Because the diversification of mobile devices to communicate between disparate mobile terminals is difficult, the two kinds of operating systems and hardware for data communication between the terminals is needed to convert the data. The proposed instant messenger design in MRP-S3C2440A (Windows CE 5.0) and Nexio XP30 (Windows CE .NET 4.1) were tested and applied. Usually the mobile terminal has an information on a central server. Sender terminal receives the message according to the characteristics of the terminal after converting was sent to the receiving terminal. Receiving-side terminal without a separate conversion process, it was the output terminals. This paper deals with the proposal and implementation of designing an instant messenger application program between the two different mobile terminals and network systems.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.12
• /
• pp.664-669
• /
• 2002

In this paper the method to determine tire optimal switching instants in order to reduce the transient surges during switching not relevant to the neutral treatment of shunt reactors is presented. This method consists of the following two steps. First, the instants of the voltage peaks between the contacts of each poles and the voltage magnitude as well as the moments of the current zero crosses were found out analytically. Next, the instants of the contact touches or separations were determined in consideration of the rate of decrease of dielectric strength or a circuit breaker and the variation of the its operating time. The results obtained from the EMTP(Electromagnetic Transient Program) analysis studies show that the making instants are established at the peak voltage of each three poles for any conditions of a neutral point and the possible upper limited values of inrush currents due to the variation of the mechanical operating time can be estimated.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.9
• /
• pp.67-74
• /
• 2009

The presence informations of users of Instant Messaging System In SIP(Session Initiation Protocol) environment are obtained by presence server, and message waiting indication event package is used to provide various message informations stored in the message server. In this paper, I have proposed a new method in which Extended CPL(Call Processing Language) has been applied to presence service to provide various functions to the users. A user of Instant Messaging System subscribes presence information and CPL scripts which describe his requirements, and presence server executes CPL scripts when instant messaging service is subscribed and notifies presence informations. Several CPL operation tags are added, and therefore various services which combine presence service and call processing can be provided in this system. Furthermore a new method has been proposed in which message server and presence server correlate in Instant Messaging System. When changes of message status informations occur, message server send these informations to the presence server, and presence server provides both presence informations and message status informations in extended format. As this method can be a substitute for message waiting indication event package, the system operating efficiency can be increased. The performance of this proposed system is evaluated by experiments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.1
• /
• pp.21-29
• /
• 2015

A steady-state controllable M/G/1 queueing model operating under the {T:Min(T,N)} policy is considered where the {T:Min(T,N)} policy is defined as the next busy period will be initiated either after T time units elapsed from the end of the previous busy period if at least one customer arrives at the system during that time period, or after T time units elapsed without a customer' arrival, the time instant when Nth customer arrives at the system or T time units elapsed with at least one customer arrives at the system whichever comes first. After deriving the necessary system characteristics including the expected number of customers in the system, the expected length of busy period and so on, the total expected cost function per unit time for the system operation is constructed to determine the optimal operating policy. To do so, the cost elements associated with such system characteristics including the customers' waiting cost in the system and the server's removal and activating cost are defined. Then, procedures to determine the optimal values of the decision variables included in the operating policy are provided based on minimizing the total expected cost function per unit time to operate the queueing system under considerations.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.96-103
• /
• 2014

A steady-state controllable M/G/1 queueing model operating under the (TN) policy is considered where the (TN) policy is defined as the next busy period will be initiated either after T time units elapsed from the end of the previous busy period if at least one customer arrives at the system during that time period, or the time instant when Nth customer arrives at the system after T time units elapsed without customers' arrivals during that time period. After deriving the necessary system characteristics such as the expected number of customers in the system, the expected length of busy period and so on, the total expected cost function per unit time in the system operation is constructed to determine the optimal operating policy. To do so, the cost elements associated with such system characteristics including the customers' waiting cost in the system and the server's removal and activating cost are defined. Then, the optimal values of the decision variables included in the operating policies are determined by minimizing the total expected cost function per unit time to operate the system under consideration.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.6
• /
• pp.669-681
• /
• 2006

In this work, a new method of design adaptive controllers for SISO systems based on multiple models and switching is presented. The controller selects the model from a given set, according to a switching rule based on output prediction errors. The goal is to design, at each sample instant, a predictive control law that ensures the robust stability of the closed-loop system and achieves the best performance for the current operating point. At each sample the proposed control scheme identifies a set of linear models that best characterizes the dynamics of the current operating region. Then, it carries out an automatic reconfiguration of the controller to achieve the best possible performance whilst providing a guarantee of robust closed-loop stability. The results are illustrated by simulations a nonlinear continuous and stirred tank reactor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.209-212
• /
• 1999

We studied the operating properties of resistive and inductive SFCLS with 100 $\Omega$ of quench impedance for a three-phase-fault in the 154 kV transmission system. The fault simulation at the phase angles 0$^{\circ}$ , 45$^{\circ}$ , and 90$^{\circ}$ showed that the resistive SFCL limited the fault current less than 16 kA without any DC component after one half cycle from the instant of the fault. On the other hand, the inductive SFCL suppressed the current below 11 kA, but with 3-4 kA of DC component which decreased to zero in 5 cycles. We concluded that the inductive SFCL had higher performance in current limiting but the resistive SFCL was better from the view point of DC components.