• 태양에너지
• /
• 제18권3호
• /
• pp.63-69
• /
• 1998

일반적으로 건물 단열재는 건조된 것이 사용되며 이 상태에서 열전도율을 측정하여 열 손실을 산정할 때 기초자료로 이용될 수 있다. 그러나 이러한 단열재가 흡습성 재료인 경우에는 습도평형 혹은 다른 작용에 의해 습도가 높아지기에 이에 따라 열전도율도 상승하게된다. 이처럼 재료 열전도율의 상승효과는 건축물에 흡습성 재료가 사용될 경우 그 사이에 비흡습성 단열재료가 시공됐을 때도 양쪽재료의 흡습성으로 인하여 단열재의 열전도율이 상승하게 되며 이에 따른 열손실 또한 높아진다. 본 논문에서는 이러한 열전도율의 상승을 간단하게 계획단계에서 적용할 수 있도록 실측에 의해 검증된 약산식을 통해 산출될 수 있도록 하였다.

• Animal cells and systems
• /
• 제6권4호
• /
• pp.327-333
• /
• 2002

Among the silk glands in the black widow spider Latrodectus mactans, the ampullate one is the most predominant gland in both sexes, and is com-posed of three functional parts - excretory duct, storage ampulla and convoluted tail regions. This experiment was performed using mechanical pulling stimulation with electric motor equipment to reveal a correlation between silk usage and silk producing system in this poisonous spider. The mature secretory products in glandular epithelium are closely packed and appear as electron-opaque spherical vesicles. A part of the vesicles with fine fibrillar paracrystalline texture seems to store some proteins which will function at the time of final assembly into fibrils. Most of the secretory silk products which originated from the rough endoplasmic reticula of the glandular epithelial cells are grown by fusion with surrounding small vesi-cles. However, the Golgi complex does not seem to play an important role in this process of secretion. According to progressive maturation of secre-tory silk product, these granules are progressively filled with a fine fibrillar material, and thus appear much more electron-dense than those of earlier states. When the secretory product is extruded from the glandular cavity, the epithelium is rapidly changed to a thinner layer of tall columnar cells with less definitive cell membranes. After extruding there ave a few secre-tory droplets within these cells, thus causing this region to stain much lighter.

• Structural Monitoring and Maintenance
• /
• 제9권3호
• /
• pp.259-270
• /
• 2022

This study explores the use of the recently developed "strain-sensing smart skin" (S⁴) method for noncontact strain measurements on cement-based samples. S⁴ sensors are single-wall carbon nanotubes dilutely embedded in thin polymer films. Strains transmitted to the nanotubes cause systematic shifts in their near-infrared fluorescence spectra, which are analyzed to deduce local strain values. It is found that with cement-based materials, this method is hampered by spectral interference from structured near-infrared cement luminescence. However, application of an opaque blocking layer between the specimen surface and the nanotube sensing film enables interference-free strain measurements. Tests were performed on cement, mortar, and concrete specimens with such modified S⁴ coatings. When specimens were subjected to uniaxial compressive stress, the spectral peak separations varied linearly and predictably with induced strain. These results demonstrate that S⁴ is a promising emerging technology for measuring strains down to ca. 30 𝜇𝜀 in concrete structures.

• 한국패류학회지
• /
• 제27권3호
• /
• pp.273-282
• /
• 2011

The ultrastructural characteristics of germ cells during spermatogenesis and mature sperm morphology in male Pinctada martensii were investigated by transmission electron microscope observation. The morphologies of the sperm nucleus and the acrosome of this species are the oval shape and cone shape, respectively. Spermatozoa are approximately $47-50{\mu}m$ in length including a sperm nucleus (about $1.24{\mu}m$ in length), an acrosome (about $0.60{\mu}m$ in length), and tail flagellum (about $45-47{\mu}m$). The axoneme of the sperm tail shows a 9+2 structure. In P. martensii in Pteriidae, a special substructure showing a thick and wide triangular shape which is composed of electron-dense opaque material (occupied about 50% of all, the upper part of the acrosomal vesicle), appeared in the upper region (part) of the acrosomal vesicle, while the lower region (part) of the acrosomal vesicle is composed of electron-lucent material. Thus, this special structure, which exist in the upper part of the acrosomal vesicle in P. martensii, is somewhat different from those of other subacrosomal vesicle in other families in subacrosomal vesicles. Therefore, we assume that the existence of a special substructure showing a thick and wide triangular shape in the acrosomal vesicle of the spermatozoon can be used as a key characteristic for identification of P. martensii or other species in Pteriidae in subclass Pteriomorphia. The number of mitochondria in the midpiece of the sperm of this species are five (exceptionally sometimes four), as one of common characteristics appear the same number of mitochondria in the same families of superfamilyies. This species in Pteriidae does not contain the axial rod and satellite fibres which appear in the species in Ostreidae in subclass Pteriomorphia. These characteristics can be used for the taxonomic analysis of the family or superfamily levels as a systematic key or tools.

• 한국의상디자인학회지
• /
• 제22권2호
• /
• pp.137-149
• /
• 2020

The purpose of this study is to identify the perception of New-Hanbok Skirts that female consumers have and to analyze the design preference based on the analysis of designs of skirt products currently in distribution. Based on the analysis of the New-Hanbok brand website, the research was conducted through a survey of 355 women in their 20s and older. The survey consisted of 24 questions which were divided into pattern, color, material, and recognition type questions. The research results are as follows. First, most adult women answered that a New-Hanbok skirt is appropriate to wear at a holiday, anniversary, or outer dress for the spring and autumn seasons, and the design is the most important thing when considering buying. However, the ratios of wearing experience and possession were very low. Second, the preferred design aspects of a New-Hanbok skirt were the Jarak-skirt or Deot-skirt, calf-length, 5cm width of the waistband, 3cm uniform crease, a normal length waistband, bright neutral colors, and a waistband in different colors. For the double skirt, the design that shows 4cm of lining fabric and the different colors of upper fabric was the most preferred. The most preferred material was plain cotton. On the other hand, small floral patterns were preferred for patterned materials, and opaque upper fabric was most preferred for the double skirt. Through this study, it was confirmed that the Hanbok is seen as a positive aspect for modern consumers.

• 공업화학
• /
• 제31권3호
• /
• pp.305-309
• /
• 2020

본 연구에서는 에테르가 기능화된 이온성 액체인 [DMIm][MPEGP] (1,3-dimethylimidazolium (2-methoxy(2-ethoxy(2-ethoxy)))-ethylphosphite)와 리튬염인 LiTf₂N (lithium bis(trifluoromethanesulfonyl)imide)을 혼합하였고, 리튬염의 함량을 조절하여 전해질을 특성을 조사하였다. 제조된 전해질은 리튬염 혼합에 따라 불투명해지고 흐름성이 제한된 열방성 액정을 형성하였으며, 이때 리튬염의 함량에 따라 형성되는 이온성 액정의 자기조립구조와 이온 전도 현상을 다양한 분광학적 분석을 통해 조사하였다. 그 결과 이온성 액정의 향상된 이온전도도는 정렬된 구조를 통한 이온 전도 특성과 관계가 있음을 확인하였으며, 리튬이온전지 특성 평가에서 우수한 전기화학적 특성을 나타냄을 확인하였다.

• 한국재료학회지
• /
• 제23권4호
• /
• pp.215-218
• /
• 2013

Vanadium dioxide ($VO_2$) is an attractive material for smart window applications where the transmittance of light can be automatically modulated from a transparent state to an opaque state at the critical temperature of ${\sim}68^{\circ}C$. Meanwhile, F : $SnO_2$ (F-doped $SnO_2$, FTO) glass is a transparent conductive oxide material that is widely used in solar-energy-related applications because of its excellent optical and electrical properties. Relatively high transmittance and low emissivity have been obtained for FTO-coated glasses. Tunable transmittance corresponding to ambient temperature and low emissivity can be expected from $VO_2$ films deposited onto FTO glasses. In this study, FTO glasses were applied for the deposition of $VO_2$ thin films by pulsed DC magnetron sputtering. $VO_2$ thin films were also deposited on a Pyrex substrate for comparison. To decrease the phase transition temperature of $VO_2$, tungsten-doped $VO_2$ films were also deposited onto FTO glasses. The visible transmittance of $VO_2$/FTO was higher than that of $VO_2$/pyrex due to the increased crystallinity of the $VO_2$ thin film deposited on FTO and decreased interface reflection. Although the solar transmittance modulation of $VO_2$/FTO was lower than that of $VO_2$/pyrex, room temperature solar transmittance of $VO_2$/FTO was lower than that of $VO_2$/pyrex, which is advantageous for reflecting solar heat energy in summer.

• 한국발생생물학회지:발생과생식
• /
• 제16권1호
• /
• pp.19-29
• /
• 2012

The ultrastructural characteristics of germ cell differentiations during spermatogenesis and mature sperm morphology in male $Atrina$ ($Servatrina$) $pectinata$ were evaluated via transmission electron microscopic observation. The accessory cells, which contained a large quantity of glycogen particles and lipid droplets in the cytoplasm, are assumed to be involved in nutrient supply for germ cell development. Morphologically, the sperm nucleus and acrosome of this species are ovoid and conical in shape, respectively. The acrosomal vesicle, which is formed by two kinds of electron-dense or lucent materials, appears from the base to the tip: a thick and slender elliptical line, which is composed of electron-dense opaque material, appears along the outer part (region) of the acrosomal vesicle from the base to the tip, whereas the inner part (region) of the acrosomal vesicle is composed of electron-lucent material in the acrosomal vesicle. Two special characteristics, which are found in the acrosomal vesicle of A. ($S$) $pectinata$ in Pinnidae (subclass Pteriomorphia), can be employed for phylogenetic and taxonomic analyses as a taxonomic key or a significant tool. The spermatozoa were approximately $45-50{\mu}m$ in length, including a sperm nucleus (about $1.43{\mu}m$ in length), an acrosome (about $0.51{\mu}m$ in length), and a tail flagellum (about $46-47{\mu}m$). The axoneme of the sperm tail evidences a 9+2 structure.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.101-105
• /
• 2016

The basic characteristics of glass are highly fragile and brittle consequences the ultimate purpose of glass manufacturing is to make a transparent glass with complex shape. In order to solve this problem, mechanical properties of glass can be increased by crystallization of its amorphous glass. However, glass-ceramics has become opaque through crystallization process due to the distracted interface of glass by precipitated particles. This study has been investigated thermal processing conditions of LAS transparent glass-ceramic by using DTA (differential thermal analysis), in order to control size of precipitated particle and then fabricate transparent glass-ceramic. DTA indicated that crystallization peak area was declined with increased nucleation temperature. Subsequently, we have been established optimum temperature for crystallization depending on the nucleation temperature. The transmission and thermal expansion were measured after crystallization, and the size of precipitated particle was identified in range of 20~100 nm by FE-SEM. In addition, by setting the optimized crystallization condition, with high transmission and low thermal expansion glass was synthesized through this experiment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.449-452
• /
• 2008

본 연구는 골재의 표면수 변동에 따른 콘크리트의 품질변동이 안정하며 현장에서 무진동 무다짐 시공이 가능한 병용계 고유동 자기충전콘크리트 (High flowing Self-Compacting Concrete ; 이하 HSCC라 약함)를 제조하였으며, 실내실험을 통하여 경화 전 후 콘크리트에서 발생하는 기포의 저감 요인을 검토하고자 한다. 병용계 HSCC는 굳지 않은 콘크리트의 점성을 증가하기 위하여 증점제의 사용은 필연적이며 이러한 결과 분체계 HSCC보다 많은 수의 기포를 발생시킨다. 또한 경화 후 콘크리트 내에 갇흰공기의 발생으로 만들어진 표면의 기포는 구조물의 미관뿐만 아니라 강도 및 내구성에도 나쁜 영향을 미치는 연구결과가 보고 되고 있다. 본 논문에서는 병용계 HSCC의 기포발생을 저감하기 위하여 골재(잔골재) 종류, 콘크리트 비빔시간, 박리제 종류 및 모형 거푸집 재질에 따른 콘크리트의 기포발생에 대한 실험을 실시하였다. 실험 결과 박리제 및 모형 거푸집 재질에 따른 경화 후 병용계 HSCC의 표면마감성능은 거푸집의 영향 보다 박리재의 영향이 크게 작용하였으며 불투명 구리스가 가장 좋은 마감상태를 유지하였다.