• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.560-569
• /
• 1999

Blood supply rather than nerve supply implies pulp vitality. To evaluate pulp vitality clinically, electric pulp test and thermal test which are based on sensory nerve response have been used in addition to many auxiliary data such as past dental history, visual inspection, radiographic examination, percussion, palpation and transillumination test. However, reactivity of the nerves to the stimulation is not synonymous with normalcy. Therefore measurement of pulpal blood flow using a laser Doppler flowmeter became a new trial to test the pulp vitality. The purpose of the present study was to evaluate normal pulpal blood flow level of maxillary teeth in adult to provide a guideline in determining the vitality of dental pulp. Pulpal blood flow was measured in maxillary central and lateral incisors, canines, first and second premolars and first molars of seventy nine adults of 22 - 30 years old using a laser Doppler flowmeter (PeriFlux 4001, Perimed Co., Stockholm, Sweden, 780 nm infrared laser, 1mW). For directly-made splints, silicone rubber impressions were taken directly from the mouth. For indirectly-made splints, alginate impressions were taken from the mouth and stone cast were made. After making depressions on the buccal surfaces of the cast teeth to indicate the hole positions, second impressions with vinyl polysyloxane putty were taken from the cast. Holes for the laser probes were made at the putty impressions 4mm above the gingival level. Laser probe (PF416 dental probe, 1.5mm) was inserted in the prepared hole and the splint was set in the mouth. After 10 minutes of patient relaxing, pulpal blood flow was recorded for 5 minutes on each tooth. The recorded flow was saved in the computer and calculated with a software 'Perisoft' version 5.1. Pulpal blood flow was also recorded in six teeth of five individuals with no response to electric pulp test and cold test, with periapical radiolucency, or with history of root canal treatment to compare with nonvital teeth. The difference between the mean flow values of each group of teeth were analyzed using one-way ANOVA and Duncan's Multiple Range test. The results were as follows: 1. The average pulpal blood flow values of all the tested teeth of each location were between 9 - 16 Perfusion Unit. Pulpal blood flow value was highest in maxillary lateral incisors, followed by first premolars, second premolars, canines, central incisors, and then first molars (p<0.01). 2. In six anterior teeth, indirectly-made splint group showed higher pulpal blood flow values than directly-made splint group (p<0.01). In posterior teeth, however, there was no significant flow value difference between directly-made splint group and indirectly-made splint one (p>0.05). 3. Teeth with vital pulps showed higher signal values than teeth with nonvital pulps (p<0.01), and the flow photographs showed heartbeat-synchronous fluctuations and vasomotions, while those were absent in non vital tooth.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.253-261
• /
• 2022

The purpose of this study is to investigate the relationship between transformative leadership, team cohesion, and team performance of Chinese university taekwondo leaders. Specifically, it is to investigate the effect of transformative leadership on team cohesion and team performance and to verify the mediating effect of team cohesion in the relationship between transformative leadership and team performance. In order to achieve the research purpose, a total of 350 people were sampled after setting taekwondo leaders at Chinese universities as a population. The measurement tool used in this study was a questionnaire consisting of 5 items on demographic characteristics, a total of 19 questions on transformational leadership, 10 questions on team cohesion, and 4 questions on team performance. The validity of the questionnaire was verified through exploratory factor analysis, and the reliability was verified through reliability analysis. The reliability Cronbach's α of the questionnaire was found to be α=0.755-0.799 for transformative leadership, α=0.848, and α=0.740 for team performance. As the data processing method, exploratory factor analysis and reliability analysis, one-way analysis (one-way ANOVA), and multiple regression analysis were used using SPSS WIN. The conclusions derived through the above research methods and procedures are as follows. First, the transformative leadership of Taekwondo leaders at Chinese universities influenced team cohesion. Second, the transformative leadership of Taekwondo leaders at Chinese universities influenced team performance. Third, the team cohesiveness of Taekwondo leaders at Chinese universities influenced team performance. Fourth, the transformative leadership of Taekwondo leaders at Chinese universities not only directly affects team performance, but also indirectly affects team cohesion. Therefore, it is believed that Chinese Taekwondo players will help improve their performance by affecting team cohesion and team performance for the best games through the leader's variable leadership.

• Journal of Environmental Impact Assessment
• /
• v.24 no.6
• /
• pp.607-618
• /
• 2015

Five years have passed since the first set of environmental samples was taken in 2011 to represent various ecosystems which would help future generations lead back to the past environment. Those samples have been preserved cryogenically in the National Environmental Specimen Bank(NESB) at the National Institute of Environmental Research. Even though there is a strict regulation (SOP, standard operating procedure) that rules over the whole sampling procedure to ensure each sample to represent the sampling area, it has not been put to the test for the validation. The question needs to be answered to clear any doubts on the representativeness and the quality of the samples. In order to address the question and ensure the sampling practice set in the SOP, many steps to the measurement of the sample, that is, from sampling in the field and the chemical analysis in the lab are broken down to evaluate the uncertainty at each level. Of the 8 species currently taken for the cryogenic preservation in the NESB, pine tree samples from two different sites were selected for this study. Duplicate samples were taken from each site according to the sampling protocol followed by the duplicate analyses which were carried out for each discrete sample. The uncertainties were evaluated by Robust ANOVA; two levels of uncertainty, one is the uncertainty from the sampling practice, and the other from the analytical process, were then compiled to give the measurement uncertainty on a measured concentration of the measurand. As a result, it was confirmed that it is the sampling practice not the analytical process that accounts for the most of the measurement uncertainty. Based on the top-down approach for the measurement uncertainty, the efficient way to ensure the representativeness of the sample was to increase the quantity of each discrete sample for the making of a composite sample, than to increase the number of the discrete samples across the site. Furthermore, the cost-effective approach to enhance the confidence level on the measurement can be expected from the efforts to lower the sampling uncertainty, not the analytical uncertainty. To test the representativeness of a composite sample of a sampling area, the variance within the site should be less than the difference from duplicate sampling. For that, a criterion, ${i.e.s^2}_{geochem}$(across the site variance) <${s^2}_{samp}$(variance at the sampling location) was proposed. In light of the criterion, the two representative samples for the two study areas passed the requirement. In contrast, whenever the variance of among the sampling locations (i.e. across the site) is larger than the sampling variance, more sampling increments need to be added within the sampling area until the requirement for the representativeness is achieved.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.4
• /
• pp.618-629
• /
• 2008

The objectives of this study were to classify body types of 40s, 50s, 60s obese women according to body measurements and to investigate relationships between age and body types of obese women. Body measurement was made on 497 obese women in their 40s, 50s, 60s whose BMI (Body Mass Index) was 25.0 or more when directly measured in 'Size Korea 2004'. Data were analyzed through factor analysis, cluster analysis, Pearson's correlation coefficient, $X^2$-test, t-test, one-way analysis of variance, and Duncan's multiple range test. First. the obesity group with BMI being 25.0-30.0 was composed of 23.1% subjects in their 40s, 43.3% subjects in their 50s, and 50.0% subjects in their 60th, which demonstrates that the older subjects were, the higher the distribution was. Adding the high obesity group with BMI being more than 30.0 to the obesity group, women in their 60s were 56.7%, the most of obese bodies. Second, factor analysis of obese women's BMIs revealed that five factors were elicited, including upper-body circumference related factor, height related factor, lower-body circumference related factor, upper-body width related factor, and upper-body related factor. As a result of analyzing the clusters, three types of body shapes were classified including upper-lower obesity, upper obesity, and lower obesity. Third, obese women were thicker or wider than non-obese individuals in those factors including upper-body circumference, lower-body circumference, and body width, and longer in upper-body length, while non-obese individuals were higher or longer than obese individuals in height related factors.

• Journal of Families and Better Life
• /
• v.25 no.2 s.86
• /
• pp.13-21
• /
• 2007

This study investigates the effect of related variables (types of job, term of employment, working time, job satisfaction, payment satisfaction and, working stress) on the sense of hopelessness felt by married males. The study was conducted on 237 male employees residing in Busan, and measurement devices for study were job-related variables, working stress and hopelessness scale. The study used SPSS 12.0 program to analyze data, and conducted item analysis and reliability test for measure establishment. Average, Standard deviation, one-way ANOVA, scheffe-test, Pearson correlation, and path analysis through regression analysis were conducted pertaining to research subject. The result of this study is as follows; First, working stress has significant difference upon types or working, term of employment and job satisfaction. Office workers relatively have longer term of employment and workers who are less satisfied with job suffer from more working stress. Second, hopelessness has significant difference upon term of employment, job satisfaction and payment satisfaction among job-related variables. Thus, hopelessness is relatively less when term of employment is shorter and job satisfaction and payment satisfaction is higher. Third, variables which affect directly to working stress and hopelessness are term of employment $(\beta=.245)$, payment satisfaction $(\beta=-.182)$ and working stress $(\beta=.189)$, and types of job, term of employment and job satisfaction influences hopelessness indirectly through working stress. In conclusion, workers are more negative when term of employment is longer, payment satisfaction is less and working stress is higher. Moreover, longer term of employment and less job satisfaction contribute to higher working stress and eventually influence hopelessness. Term of employment affects the most to hopelessness $(\beta=.274)$, and it is followed by working stress $(\beta=.189)$ and payment satisfaction $(\beta=-.182)$.

• Physical Therapy Korea
• /
• v.8 no.1
• /
• pp.20-34
• /
• 2001

This paper presents the relevance between GMFM and the spatiotemporal parameters of gait in children with cerebral palsy. Twenty-one children ($73.11{\pm}30.06$ months) with cerebral palsy participated in this study. GMFM was performed and spatiotemporal parameters of gait were measured by foot print gait analysis. A correlation analysis was used to investigate the correlation between GMFM scores and spatiotemporal parameters of gait. A linear regression analysis was employed to find how much each gait spatiotemporal parameters could be predicted from GMFM scores. The total GMFM scores was significantly correlated with walking speed, cadence, and stride length. Dimensions D (standing) and E (walking, running, and jumping) were more significantly correlated with gait spatiotemporal parameters than dimensions A (lying and rolling), B (sitting), and C (crawling and kneeling). The GMFM scores were useful for predicting spatiotemporal parameters. However, it is difficult to predict the status of gait development using GMFM scores because GMFM scores and gait spatiotemporal parameters are only measured as quantities not qualities. In the field, it is easily found that many children with cerebral palsy are unable to walk in any way. Consequently, gait analysis cannot be performed in many cases. Therefore, it is more reasonable to investigate the influence of GMFM on spatiotemporal parameters, rather than vice versa.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.1
• /
• pp.151-167
• /
• 2002

Purpose : The purpose of this study is to present the direction of service marketing for improving customers' satisfaction by comparing the difference in medical and nursing service satisfaction between internal and external customers. Method : The subjects were outpatients and inpatients as the external customers and nurses, doctors, and staffs as the internal customers, in a university hospital. Data were collected from April 25 to May 2, 2001 through questionnaires. The 2 structured instruments were used for collecting the data: Customer Satisfaction Measurement 2000 developed by Korean Society of Quality Assurance in Health Care(1999) and nursing service satisfaction questionnaires by the researcher. Data were analyzed using SPSSWIN 9.0 with t-test, one-way ANOVA, scheffe test.Result : 1. In overall medical service satisfaction scores, external customers' satisfaction showed significantly higher than internal customers'(p=.000) and there was no significant difference between external customers(p>.05). But there was significant difference between internal customers(p<.05). 2. There was no significant difference in nursing service satisfaction between the external and internal customers (p>.05). In the external customers, inpatients' nursing service satisfaction showed significantly higher than outpatients' (p<.001). And there was significant difference in nursing service satisfaction between internal customers(p<.05). Conclusion : To increase external customers' satisfaction with medical and nursing service, hospital should carry out internal marketing strategies for improving internal customers' satisfaction. Also to increase outpatients' satisfaction, it should conveniently improve procedures of use and provide more information and education for outpatients.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.378-386
• /
• 2017

Accurate distance measurement between maneuver target in underwater and measuring devices is required to perform quantitative test evaluation in marine weapons system R&D process. In general, the target distance is measured using a one-way ToA (Time of Arrival) method that calculates the time difference between transmitted and received signals from the two accurately synchronized devices. However, the distance estimation performance is degraded because of the multi-path environments. In this paper, the time-variant transfer function of complex underwater environment is estimated from each received data frame using RBD (Ray-based Blind Deconvolution), and the estimated time-variant transfer function is then used to get rid of the effect about complex underwater environment and to recover the data signal using PTRM (Passive Time Reversal Mirror). The result from the simulation and experimental data show that the suggested method improve the distance estimation performance when comparing with the conventional ToA method.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.36-41
• /
• 2017

In this study, the experimental measurements from a one-way moving experiment showed that the average movement speed was 0.55 m/s with an average crowd density of $2.36P/m^2$ in a corridor. The cCalculation result of the correlations between the crowd density and movement speed from the SFPE Handbook showed an average of 0.53 m/s. The difference between the calculation and experiment was 0.02 m/s. A comparison of each data set showed that the maximum difference was 0.38 m/s. Some experimental results showed that the crowd density increased with increasing movement speed and the average data from the entire experiment time was used for the analysis. When the short time interval for frame by frame analysis for video files was conducted, the experimental data was expected to be more reliable.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.3
• /
• pp.199-206
• /
• 2015

PURPOSE. The present study investigated the influences of various gypsum materials on the precision of fit of CAD/CAM-fabricated prostheses and analyzed their correlation with surface roughness. MATERIALS AND METHODS. The master model of the mandibular right first molar was replicated, and four experimental groups based on two types of Type IV stone (GC Fujirock EP, Die keen) and two types of scannable stone (Aesthetic-Basegold, Everest Rock) were created to include a total of 40 specimens, 10 in each group. The surface roughness of the working models for the respective experimental groups was measured. Once the zirconia cores had been fabricated, the marginal and internal fits were measured with a digital microscope using the silicone replica technique. The mean and standard deviation of the respective points of measurement were computed and analyzed through the one-way ANOVA and Tukey's HSD test. The correlation between surface roughness and the precision of fit of the zirconia core was analyzed using the Pearson correlation analysis (${\alpha}$=.05). RESULTS. The zirconia cores fabricated from the scannable stone working models exhibited a superior precision of fit as compared to those fabricated from the Type IV stone working models. The correlation analysis results showed a clear positive correlation between surface roughness and the precision of fit of zirconia cores in all of the experimental groups (P<.05). CONCLUSION. The results confirmed that the surface roughness of dental working models has a decisive influence on the precision of fit of zirconia cores.