• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제9권1호
• /
• pp.19-30
• /
• 2002

We consider one class of bursting oscillation models, that is square-wave burster. One of the interesting features of these models is that periodic bursting solution need not to be unique or stable for arbitrarily small values of a singular perturbation parameter $\epsilon$. Recent results show that the bursting solution is uniquely determined and stable for most of the ranges of the small parameter $\epsilon$. In this paper, we present a condition of uniqueness and stability of periodic bursting solutions for all sufficiently small values of $\epsilon$ > 0.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.135-142
• /
• 2000

The adjusting parameter set which enable control systems to locate on stability limit can be derived from theoretical or trial methods for an existing real system. The data from the results are much available to keep a system in the Proper stability condition even to site engineers who are inexperienced in the control system. In this paper, a general one loop control system was adopted for a model system the process of which was assumed to consist of a time-delay element and a first order-lag element in series. After obtaining the corresponding parameter set for the model system by mathematical procedures, their loci on the parameter space was taken according to frequency change. The parameter set loci of stability limit showed unique pattern, and particularity , the curves on the Kg-Ti parameter space were able to be generalized in the form of, an unique exponential formula. These properties were also compared with the results taken from experimental procedures by Nyquist response method and Ziegler & Nichols method on the time domain, and both results were confirmed to be nearly same.

• 소음진동
• /
• 제6권5호
• /
• pp.595-605
• /
• 1996

If the control force designed on the basis of the mathematical model with parameter errors is applied to control the actual system, the closed-loop performance of the actual system will be degraded depending on the degree of the errors, In this study, the effect of parameter errors on the robustness of several natural controls has been analyzed and compared. Every asymptoic stability condition for the natural controls has been derived using Lyapunov approach, and the characteristics of the stability conditions has also been compared. The extent of deviation of the closed-loop performance from the designed one for the natural controls is derived using operator techniques, and evaluated by numerical method. It has been found that the optimal control, acceleration feedback control, and acceleration-position feedback control among the considered natural controls would be robust one with respect to the parameter errors.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.351-356
• /
• 2001

In this paper, a general one-loop control system was assumed as a model system which has a time-delay element connected with a first order-lag element in series. After the corresponding parameter set causing stability limit condition for the model system was obtained by mathematical procedures, their loci on the parameter space was taken according of frequency change,. The parameter set loci of stability limit showed a specific pattern, and particularly the curves on the Kp-Ti parameter space were able to generalized in the form of an exponential formula. These properties were also compared with the results taken from experimental procedures by Nyquist response method and Ziegler & Nichols method on the time domain, and both results were confirmed to be nearly same.

• 한국지반공학회논문집
• /
• 제20권2호
• /
• pp.125-130
• /
• 2004

본 논문에서는 수치적 구성방정식인 연속 탄소성 캡 모델의 정수추정에 관한 방법이 제시되었다. 캡 모델을 이용하여 실제 토질의 거동을 예측하기 위하여서는 캡 모델을 이루는 토질의 물성과 직접적으로 연관된 여덟개의 정수가 결정되어야 한다. 이를 위하여 첫 번째로, Ottawa 모래를 사용하여 표준압밀시험기를 이용한 일축압축시험 및 배수삼축압측 시험이 토질거동의 실제기준값으로서 수행되었고, 두 번째로 탄소성 캡 수치해석모델의 반응을 실내실험값에 일치시키기 위하여 추정된 정수들을 사용한 수치실험이 수행되었다. 두 실험 간의 오차를 최소화하기 위하여 최적화 기법이 사용되었으며, 최적화 후 결정된 8개의 정수는 실내실험결과와 비교되었다. 특히, 수치적 삼축압축시험시 응력계산에 따른 수평변위 측정에 특별한 주의가 필요하다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제25권4호
• /
• pp.312-326
• /
• 2021

The prey-predator model is one of the most influential mathematical models in ecology and evolutionary biology. In this study, we considered a modified prey-predator model, which describes the rate of change for each species. The effects of modifications to the classical prey-predator model are investigated here. The conditions required for the existence of the first integral and the stability of the fixed points are studied. In particular, it is shown that the first integral exists only for a subset of the model parameters, and the phase portraits around the fixed points exhibit physically relevant phenomena over a wide range of the parameter space. The results show that adding coupling terms to the classical model widely expands the dynamics with great potential for applicability in real-world phenomena.

• 청정기술
• /
• 제10권3호
• /
• pp.139-148
• /
• 2004

스와프는 철강 제조 공정 중에 발생되는 금속 부산물로서 연마유의 함량이 10%이상 되므로 국내에서 지정폐기물로 분류된다. 연마유가 함유된 스와프를 재활용하기 위하여 초임계 이산화탄소를 이용하여 재생하였고, 온도(313.15K-323.15K), 압력(10MPa-30MPa)의 실험 조건이 연마유 추출 효율에 미치는 영향을 살펴보았다. 초임계 이산화탄소의 압력이 높을수록 높은 추출 효율을 보였고, 같은 압력을 기준으로 하였을 때는 온도가 높을수록 빠른 시간 내에 추출 공정이 완료됨을 확인하였다. 본 실험에서는 선형 탈착 kinetics가정의 단일 매개 변수 모델을 사용하여 재생 효율을 예측하였고, 이는 실험 결과와 비교적 잘 일치하였다.

• 물과 미래
• /
• 제14권2호
• /
• pp.71-79
• /
• 1981

이 연구는 남한강유역의 월강우량과 월유출량을 추계학적 및 통계학적으로 분석하여 두 개의 시계열 모형식을 설정하였다. 월유출량의 시계별 모의기법은 모의합성하는 월유출량자료로 선형추계학적 모형을 유도하였다. 또한, 월강우량과 월유출량의 시계열모열은 기지 통계학적 변수를 갖는 임의 시계열이라 하여 유도하였으며, 이는 월유출량이 한 변수를 갖는 지수감소곡선의 특성과 이월기간에 대한 통계학적 변수로 전개되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.216-221
• /
• 2000

In this study, two mathematical models are first constructed to analyze vibration characteristics of a gear train - spindle system of an NC lathe gear box. One is a lumped parameter model which is used for calculating natural frequencies of the torsional vibration, the other is a finite element model for analyzing lateral vibration and critical speeds of the spindle system. In addition, this study examines some possible resonance conditions such as gear mesh frequencies, 1X shaft rpm frequencies over whole operating speed range, and so on. The results may be helpful to design a machine tool gear box with low noise and vibration.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1141-1146
• /
• 1993

The problem of tension control in metal-strip processing line is discussed. A new mathematical dynamic model which relates tension change, motor-speed change and roll-gap change is developed. Through the computer simulation of this model, parameter sensitivity, the tension transfer phenominon, and static and dynamic characteristics of strip tension were studied. Guidelines are developed to help one selecting locations of the master-speed drive in multi-drive speed control for tension adjustment and reducing the effect of interaction between tension and roll gap control.