• Industrial Engineering and Management Systems
• /
• v.8 no.2
• /
• pp.80-92
• /
• 2009

This paper addresses the inventory rationing issue embedded in the regional supply chain inventory replenishment problem (RSIRP). The concerned supply chain, which was fed by the national supply chain, consisted of a single warehouse distributing a single product to multiple stores (M-stores) with independent and normally distributed customer demand. It was assumed that the supply chain operated under the order-up-to level inventory replenishment system and had only one truck at the regional warehouse. The truck could make one replenishment trip to one store per period (a round trip per period). Based on current inventories and the vehicle constraint, the warehouse must make two decisions in each period: which store in the region to replenish and what was the replenishment quantity? The objective was to position inventories so as to minimize lost sales in the region. The warehouse inventory was replenished in every fixed-interval from a source outside the region, but the store inventory could be replenished daily. The truck destination (store) in each period was selected based on its maximum expected shortage. The replenishment quantity was then determined based on the predetermined order-up-to level system. In case of insufficient warehouse inventories to fulfill all projected store demands, an inventory rationing rule must be applied. In this paper, a new inventory rationing rule named Expected Cost Minimization (ECM) was proposed based on the practical purpose. The numerical results based on real data from a selective industry show that its performance was better and more robust than the current practice and other sharing rules in the existing literature.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1013-1022
• /
• 2012

Tag collection is one of the major concerns in radio frequency identification(RFID) system. All tags in RFID reader's transmission range send response message back to the reader in response to collection request message on the given rf channel. When multiple tags respond simultaneously, tag-collision may occur. Tag-collision problem is one of the most important issues in active RFID performance. To mitigate this problem, frame slotted ALOHA(FSA) anti-collision protocol is widely used in active RFID system. Several studies show that the maximum system efficiency of FSA anti-collision protocol is 36.8%. In this paper, we propose an efficient slotted CSMA/CA protocol to improve tag collection performance. We compare our protocol to the FSA anti-collision protocol. For the experiment, an 433MHz active RFID system is implemented, which is composed of an RFID reader and multiple tags. We evaluated the tag collection performance using one RFID reader and 40 tags in the real test bed. The experimental result shows that proposed protocol improves the tag collection time, round and collision probability by 18%, 37.4% and 77.8%, respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.2
• /
• pp.93-98
• /
• 2010

Bumblebees are widely used to pollinate various crops, especially tomato, in greenhouses and fields. An artificial hibernation is essential for year-round rearing of the bumblebee, which passes through one generation per year. Here, we investigated whether a chilling temperature and humidity affect artificial hibernation of the bumblebee queen Bombus terrestris. In chilling temperature regimes of $0^{\circ}C$, $2.5^{\circ}C$, $5^{\circ}C$, $7.5^{\circ}C$ or $12.5^{\circ}C$ under constant humidity >70%, the queens stored at $2.5^{\circ}C$ exhibited the highest rate of survival, which was 74.0% at one month, 67.0% at two months, 60.0% at three months, 46.0% at 4 months, 33.0% at 5 months, and 24.0% at 6 months. Rates of survival decreased at the following temperatures: $0^{\circ}C$, $5^{\circ}C$, $7.5^{\circ}C$ and $12.5^{\circ}C$. Colony developmental characteristics after diapause were 1.2- to 1.5-fold higher than those of queens stored at $5^{\circ}C$. In terms of chilling humidity, the queens hibernated at 70% under $2.5^{\circ}C$ exhibited the highest rate of survival, which was $93.3{\pm}3.4%$ at one month, $83.3{\pm}0.0%$ at two months, $76.7{\pm}0.0%$ at 3 months and $36.7{\pm}12.1%$ at 5 months. The rates of oviposition, colony foundation and progeny-queen production of queens hibernated at 70% were 80.8%, 30.8% and 30.8%, respectively. These values correspond to 1.7- to 3.3-fold increases in comparison to queens stored at 50% humidity. Therefore, $2.5^{\circ}C$ and 70% R.H. were the favorable chilling temperature and humidity conditions for diapause break of B. terrestris queens.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.2
• /
• pp.230-238
• /
• 2016

This study examined the effects of freezing and thawing conditions on quality of Hanwoo bottom round. The beef samples were frozen by air blast freezing at $-20^{\circ}C$ or ethanol immersion freezing at $-70^{\circ}C$ and then stored at $-20^{\circ}C$ for 10 days. After 10 days of storage, the frozen samples were thawed with air blast thawing at $4^{\circ}C$ or water immersion thawing at $4^{\circ}C$ and subjected to subsequent analyses of drip loss, water holding capacity, thiobarbituric acid reactive substance (TBARS), volatile basic nitrogen (VBN), total aerobic bacteria, and microstructure. Drip loss significantly increased in samples treated with air blast freezing compared to ethanol immersion freezing, whereas freezing and thawing processes had no significant impact on water holding capacity of the samples. Thawing conditions had a much stronger influence on the TBARS and VBN of the samples than freezing conditions. There was no significant difference in the population of total aerobic bacteria among the four samples subjected to one freeze-thaw cycle. In addition, to analyze the effects of freeze-thaw cycle on the quality of beef, three freeze-thaw cycles were performed during storage. Multiple freeze-thaw cycles increased drip loss, TBARS, and VBN and decreased water holding capacity, accelerating microstructural damage. These data indicate that Hanwoo bottom round can be rapidly frozen and thawed by using ethanol immersion freezing and water immersion thawing methods with minimal impact on meat quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.324-330
• /
• 2013

One of the abundant biomass for bioenergy production is thought to be agricultural by-products produced annually. The purpose of this study were to provide basic information about the changes of the moisture contents and chemical compositions for storage periods and bale types of rice straw, and it was attempted for the first time. The bale types of rice straw which were harvest in October 2011, were the square bale, the round bale, and the wrapped round bale type with plastic, respectively. Each of bale were stored in house, outdoor, and rain sheltering facilities condition for 1 year. The moisture contents and chemical compositions for each bale type are investigated for the 3-storage stages (0, 6, 12 month). While the moisture contents of the square and round bales stored in house condition were ranged from 20~25%, the square bale stored under the rain shelter facilities was showed the lowest moisture content less than 20% during the storage periods. For the chemical compositions, the cellulose and hemicellulose contents of rice straw bale stored in outdoor condition were decreased with the storage periods. However, in house condition, the chemical compositions of the square and round bales were slightly increased at the middle and the end of storage stages (6 and 12 months) compared with the initial storage stage (0 month). In conclusion, while optimum and favorable storage conditions of agricultural by-products is a house storage of the bale with plastic, if the bale can stored at outdoor, water penetration prevention such as the rain shelter facilities is required.

• Journal of Chest Surgery
• /
• v.32 no.5
• /
• pp.442-447
• /
• 1999

Introduction: Understanding the normal distribution of the tracheal diameter and crross- sectional area is one of the key elements in the management of various tracheal pathologies or tracheal reconstruction for the patients in growing age. However, data for Korean standard has been lacking. This study was designed to analyze retrospectively the distribution of tracheal diameter and cross-sectional area in young Koreans, which can afford fundamental data for the management of tracheal diseases. Material and Method: Of the patients who underwent computerized tomogram of the chest between May 1996 and August 1998, one hundred six young patients(age range: 0-20 years) were included. Patients with any conditions which might affect the tracheal cross-sectional area or diameter, such as tracheal disease, previous operation, mediastinal tumor, or obstructive lung disease were excluded from the study. Gender distribution was 69 males and 37 females. Tracheal diameters, anterior-posterior and transverse, were measured at the level of the thoracic inlet(level I) and the aortic arch(level II). Types of the trachea were divided into round, oval, or horseshoe shaped on cross-sectional view, and the dimension was calculated by using the equation of A=1/4$\pi$ab(A; area, $\pi$; 3.14, a; anterior-posterior diameter, b; transverse diameter). We analyzed the distribution of the diameter at each level and compared the cross-sectional area with respect to age and gender. A p-value lower than 0.05 wa considered significant. Result: The trachea of patients less than 5 years old were round in shape at both of level I and II, and no differences in cross-sectional area was observed between the levels(p=NS). As the age increased, the trachea become oval in shape at level I while it remained round in shape at level II(p=0.020). The tracheal diameter and cross-sectional area increased as the age increased with a linear correlation(r>0.9). In patients less than 5 years of age, female patients showed larger cross-sectional area than male patients (p=0.020), and it was reversed in patients older than 15 years of age(p=0.002). Conclusion: From the above results, we suggest chest computerized tomogram as a safe and reliable tool in measuring the tracheal diameter and cross-sectional area. We also provide the data as a standard for distribution of the tracheal diameter and cross-sectional area in young Korean population.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.97-119
• /
• 2008

The purpose of this research is to clarify the elements of the function of the role of industrial high schools that its experts perceived. The content of this research is verify the function element required for the performance of the role of specialized education through content validity ratio(CVR). This research adopted the method of literature research and Delphi method, which is to collect and come to an agreement of the opinions of the 26 research panels. The first round is constructed by the semi-constructed questionnaire for the analysis of the opinions of the panels by inductive method. The second round is to categorize the result of the first one into 7 domains, and asked each category by Likert's 5 scale checklists, and statistically analyzed mean, medium, standard deviation, and quartile. The third round is to statistically analyze Mean, standard deviation, medium, and validity ratio(CVR) to reassure the opinions of the panels on the basis of the result of the first one. The categorized contents of the function required for the performance of the specialized education in this research is 'in-service visit and in-service training', 'licence acquiring education', 'employment counseling and job employment information', 'custom-made education connected with industry', 'career education' and 'enhancement of basic career competency'. The panels are divided into professors, teachers, professionals, and policy administrators, and they verified the validity rate of the function role and priority of emphasis. The result showed that the tendency of the education is converting from physical function-centered education to education of emotional attitude and competence of thought.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.40-47
• /
• 2023

There are many different types of cultivation in tomatoes for year-round production. One of them, semi-forcing cultivation is characterized by growing seedlings in winter season. If grafted seedlings are used in winter season that energy cost can be reduced, because they have tolerance to cold stress. This study was conducted to analyze the rootstock performance by measuring the growth, yield, and leaf-macronutrient content of cherry tomatoes grown in semi-forcing hydroponics. Three domestic rootstocks 'HSF4', '21LM', '21A701', and a control cultivar 'B-blocking' were grafted onto jujube-shaped cherry tomato (Lycopersicon esculentum L.) commercial cultivar 'Nonari'. The total yield per plant with grafted cherry tomato '21A701' was 3,387g, which was 11%, 22% and 24% higher than the yield with 'B-blocking', non-grafted one and 'HSF4'. The stem diameter of '21A701' was thick with 8.26mm, whereas non-grafted one was thin with 7.23mm at 160 days after transplanting. The flowering position of '21LM' was 34% and 47% higher than the flowering position of 'B-blocking' and non-grafted one at 153 days after transplanting. The NO₃-N concentration in petiole sap of '21LM' was the highest with 1,746mg·L^-1 and non-grafted one and 'HSF4' were the lowest with 1,252mg·L^-1 and 1,245mg·L^-1 at 167 days after transplanting. The results indicated that rootstock/scion combinations in cherry tomatoes can affect the plant growth, yield, and the concentration of different NO₃-N in leaves at the late growth stage. Both '21A701' and '21LM' have vigorous root system, which influence the growth and yield increased.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1864-1869
• /
• 2007

In this study, we compare thermal performance between four different types of cold plates for humanoid robot cooling. Two commercially available cold plates made of copper have different dimensions and internal flow paths: One has $20{\times}20$ $mm^2$ base area with micro-channels and the other has $62.5{\times}62.5$ $mm^2$ base area with 85 round pin-fins. And two different types of cold plates of $20{\times}20$ $mm^2$ base area with 7 mm high are made of PC (polycarbonate), which aims to reduce the weight of cooling system. All cold plates are mounted on a $20{\times}20$ $mm^2$ copper block with two cartridge heaters of 30 $W/cm^2$. The overall heat transfer coefficient and thermal resistances for the liquid-cooled cold plates are obtained. The copper cold plate with micro-channels showed the best performance. Polycarbonate cold plates display fairly good thermal performance with more reduced system weight.

• The Korean Journal of Cytopathology
• /
• v.1 no.1
• /
• pp.85-92
• /
• 1990

We present the cytologic features of a case of solid and papillary neoplasm of the pancreas. Cytologically, the tumor was composed of a monotonous population of polygonal cells containing eccentrically located round nuclei with one or two distinct small nucleoli and a finely stippled chromatin pattern. The tumor cells were similar to those of the islet cell tumor and showed isolated loosely aggregated and solid sheets or large cell clumps. The large cell clumps revealed a branching papillary structure containing fibrovascular central core, which is characteristic histologic feature of solid and papillary neoplasm of the pancreas. This case was confirmed by tissue examination including histochemical, immunohistochemical and electron microscopical studies. Ultrastructurally, the tumor cells contained a few membrane- bound electron dense granules.