• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.109-114
• /
• 2000

A new method for the determination of camera system rotation and translation from in 3-D space using recursive least square method is presented in this paper. With this method, the calculation of the equation is found by a linear algorithm. Where the equation are either given or be obtained by solving five or more point correspondences. Good results can be obtained in the presence if more than the eight point. A main advantage of this new method is that it decouple rotation and translation, and then reduces computation. With respect to error in the solution point number in the input image data, adding one more feature correspondence to required minimum number improves the solution accuracy drastically. However, further increase in the number of feature correspondence improve the solution accuracy only slowly. The algorithm proposed by this paper is used to make camera system rotation and translation easy to recognize even when camera system attached at end effecter of six degrees of freedom industrial robot manipulator are applied industrial field.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.219-222
• /
• 1996

During the navigation of mobile robot, one of the essential task is to determination the absolute location of mobile robot. In this paper, we proposed a method to determine the position of the camera from a landmark through the visual image of a quadrangle typed landmark using neural network. In determining the position of the camera on the world coordinate, there is difference between real value and calculated value because of uncertainty in pixels, incorrect camera calibration and lens distortion etc. This paper describes the solution of the above problem using BPN(Back Propagation Network). The experimental results show the superiority of the proposed method in comparison to conventional method in the performance of determining camera position.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.12
• /
• pp.1001-1008
• /
• 2001

This paper presents a new camera calibration algorithm for ill-conditioned cases in which the camera plane is nearly parallel to a set of non-coplanar calibration boards. for the ill-conditioned case, most of existing calibration approaches such as Tsais radial-alignment-constraint method cannot be applied. Recently, for the ill-conditioned coplanar calibration Lee&Lee[16] proposed an iterative algorithm based on the least square method. The non-coplanar calibration algorithm presented in this paper is an iterative two-stage procedure with extends the previous coplanar calibration algorithm. Through the first stage, camera, position and orientation parameters as well as one radial distortion factor are determined optimally for a given data of the scale factor and the focal length. In the second stage, the scale factor and the focal length are locally optimized. This process is repeated until any improvement cannot be expected any more Computational results are provided to show the performance of the algorithm developed.

• The Journal of Korea Robotics Society
• /
• v.5 no.2
• /
• pp.143-151
• /
• 2010

Automation and robotization has been required in construction for several decades and construction industry has become one of the important research areas in the field of service robotics. Especially in the steel construction, automatic recognition of structural steel members in the stockyard is emphasized. However, since the pose of steel frame in the stockyard is site dependent and also the stockyard is usually in the outdoor environment, it is difficult to determine the pose automatically. This paper adopts the recognition method based on the augmented reality to cope with this problem. Particularly focusing on the light condition of the outdoor environment, we formulated the optimization problem with the constraint and suggested the methodology to evaluate the optimal camera arrangement. From simulation results, sub-optimal solution for the position of the camera can be obtained.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.5
• /
• pp.98-103
• /
• 2011

Recently, UV(ultra-violet rays) camera has attracted a great deal of interest from the view point of easy judgement in inspections and diagnoses of the safety of power equipment. Especilly, UV camera is applied the inspection of UV with corona discharge. One of the most important and difficult problems is the basic research of filter design, materials and corona discharge. In this paper, we will report on the UV generation, corona pulse count and the polarity effect of positive and negative DC surface discharge in air. Also, corona discharge characteristics are analyzed using prototype UV camera of Korea. UV generation and corona pulse count due to surface discharge in positive needle is higher than that of negative needle.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.1-12
• /
• 2011

Movie contents requiring multiple shootings in places need much man power and many equipments. It is more serious in the case of multiple simultaneous shootings. In the points of small broadcasting companies, it is more difficult to cope with the situation, but it is also an essential task for the variety of video contents. We propose an one-person movie production scheme based on an IP camera-based live webcasting system which makes multiple shootings in places possible. It consists of three main functions of (1) collecting multiple video streams sent from IP cameras installed in places, (2) properly distributing them to Internet, and (3) receiving and editing them including recording video. By using the proposed scheme, we can be able to remotely utilize a new framework of Single-Person/ Multiple-Camera which beyonds the conventional Single-Person/Single-Camera framework. It becomes possible to take multiple simultaneous shoots in places. We can get an advantage of saving man power and time for producing various movie contents.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.148-154
• /
• 2014

This paper suggests a new system based on image-processed information which is designed to control traffic light by measuring two-way traffic at the same time with a surveillance camera. With this system, the existing way of using one camera for one lane or loop coil will be improved to the more effective way of using only one camera to monitor a two-way, 8 lane roads statistically. Car images can be detected clearly even in irregular condition because of the background updating in real time. In addition, more accurate measurement is possible to users by selecting extra attention-needed regions. The automatic traffic light controlling algorithm, suggested in this paper, will prevent users and drivers from wasting their time and energy by controlling the number of traffic in advance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.463-470
• /
• 2015

When a camera installed on a vehicle is used, estimation of the camera pose including tilt, roll, and pan angle with respect to the world coordinate system is important to associate camera coordinates with world coordinates. Previous approaches using huge calibration patterns have the disadvantage that the calibration patterns are costly to make and install. And, previous approaches exploiting multiple vanishing points detected in a single image are not suitable for automotive applications as a scene where multiple vanishing points can be captured by a front camera is hard to find in our daily environment. This paper proposes a camera pose estimation method. It collects multiple images of lane markings while changing the horizontal angle with respect to the markings. One vanishing point, the cross point of the left and right lane marking, is detected in each image, and vanishing line is estimated based on the detected vanishing points. Finally, camera pose is estimated from the vanishing line. The proposed method is based on the fact that planar motion does not change the vanishing line of the plane and the normal vector of the plane can be estimated by the vanishing line. Experiments with large and small tilt and roll angle show that the proposed method outputs accurate estimation results respectively. It is verified by checking the lane markings are up right in the bird's eye view image when the pan angle is compensated.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.174-181
• /
• 2001

In this study, the architecture of the Web Camera System for realtime monitoring on Internet is proposed and implemented in two different structures. In the one architecture, a Web-server and a Camera-server are implemented on the same system, and the system transfers motion pictures compressed to JPEG file to users on the WWW(World Wide Web). In the other architecture, the Web-server and the Camera-server are implemented on different systems, and the motion pictures are transferred from the Camera-server to the Web-server, and finally to users. For JPEG image transferring in the Web Camera system, the Java Applet and the Java Script are used to maximize flexibility of the system from the Operating system and the Web browsers. In order to compare system performance between two architectures, data traffic is measured and simulated in the unit of byte per second.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.10-17
• /
• 2010

This paper presents a calibration method of an omnidirectional stereo camera which may be essentially performed for distance measurement to a certain point. In the calibration of the omnidirectional stereo camera, the independent calibrations of two cameras or the calibration of a stereo camera having the small baseline is feasible applying many methods studied in the past. However, the baseline should be large enough for long distance measurement by the omnidirectional stereo camera, since it is not easy to calibrate two cameras with a large baseline at the same time. It is because a test pattern for the calibration, which is simultaneously captured by two omnidirectional cameras, appears too small in at least one of the omnidirectional cameras. It causes inaccurate calibration. In this paper, therefore, we propose a calibration method of the omnidirectional stereo camera with a large baseline and empirically verify its feasibility.