• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.396-399
• /
• 1995

In this study, Acquisition system is proposed to acquire 3 dimensional data of the free surface model using direct pulse control to machining center. Todo this, I/F to connect between manual operating handle and computer is made, and 3 dimensional shape measuring algorithm using Z-map is applied. The 3 dimensional shape data of the free surface model measured by laser displacement sensor and electric touch probe are achieved directly. Performance of the proposed system is evaluated through measurement of various shape model.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.93-101
• /
• 1997

Ever since the nonlinearity of machine tool dynamics was established, researchers attempted to make use of this fact to devise better monitoring, diagnostics and control system, which were hitherto based on linear models. Theory of chaos which explains many nonlinear phenomena comes handy for furthering the analysis using nonlinear model. In this study, measuring system will be constructed using multi-sensor (Tool Dynamometer, Acoustic Emission) in end milling process. Then, it will be verified that cutting force is low-dimensional chaos by calculating Lyapunov exponents. Fractal dimension, embedding dimension. And it will be investigated that the relation between characteristic parameter calculated from sensor signal and tool wear.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.60-67
• /
• 2002

A precise measurement of field test was performed to estimate the thermal performance of the forced convection electric air heater by experiment. Air temperature, flow rate and electrical power input were measured with the related measurement sensors, and acquisition methods for the measured data were studied to estimate the thermal performance of the tested air heater effectively. To determine the mean air temperature at the flow cross-section, measuring positions were chosen by considering the flow velocity profile and the equally divided cross-sectional area. From the experimental results, thermal efficiency was obtained accurately as an indication of the tested heating system performance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.427-432
• /
• 2003

The control method of programmable dynamometer for overall test of machine is to load the reference torque which is computed from torque transducer into motor under test. But the torque information detected from torque transducer have a lot of noise when the load torque of moter is a small quantity or changing. Thus, torque transducer must have a low pass filter to detect a definite torque information. But The torque delay generated by filter with torque transducer occur a torque trouble for meter torque of programmable dynamometer. The proposed system improved the problem of the torque measuring delay with torque transducer, and the load torque is estimated by the minimal order state observer based on the torque component of the vector control induction meter. Therefore, the torque controller is not affected by a load torque disturbance.

• 해양환경안전학회지
• /
• 제23권4호
• /
• pp.415-420
• /
• 2017

본 논문에서는 머신비전을 이용하여 컨베이어 시스템에서 이동하는 객체를 계수하는 알고리즘을 제안하였다. 영상처리를 이용한 객체 계수 시스템은 유동인구나 교통량 파악 등의 다양한 산업현장에서 사용되고 있으며, 주로 템플릿 매칭이나 기계학습의 방법으로 검출하여 추적 후 계수한다. 하지만 빠르게 움직이는 컨베이어 벨트위의 물체를 검출하기 위해서는 연산에 소요되는 시간이 짧아야 하므로 영역기반의 방법으로 영상처리를 하였다. 본 연구에서는 모양과 크기, 그리고 색깔이 비슷한 전복 치패를 계수하였다. 컨베이어 시스템은 한 방향으로 동작하는 특성을 이용하여 첫 번째 영역에서 치패를 검출하여 정보를 얻은 것을 기반으로 다음 프레임에서의 물체의 위치 범위를 계속적으로 변화하여 치패를 검출하고 각각의 획득한 정보를 비교하여 계수하였다. 치패가 간격을 두고 이동 시에는 정확하게 계수됨을 확인하였으며, 치패가 붙어서 오는 경우에는 크기정보를 이용하여 계수하여 중복되거나 누락됨을 방지하였다. 본 논문에서 제안한 알고리즘은 컨베이어 시스템 위에서 움직이는 다양한 객체 계수 제어에 적용할 수 있을 것이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권1호
• /
• pp.190-207
• /
• 2015

In the combustion engineering, to decrease pollution and increase production efficiency, and to optimally keep solid burning material amount constant in a burner online, it needs a smart method to detect the amount variation of the burning materials in a high temperature environment. This paper presents an online machine vision system for automatically measuring and detecting the burning material amount inside a burner or a boiler. In the camera-protecting box of the system, a sub-system for cooling is constructed by using the cooling water circulation techqique. In addition, the key and intelligent step in the system is to detect the pile profile of the variable burning material, and the algorithm for the pile profile tracing was studied based on the combination of the gey level (color) discontinuity and similarity based image segmentation methods, the discontinuity based sub-algorithm is made on the quaternion convolution, and the similarity based sub-algorithm is designed according to the region growing with multi-scale clustering. The results of the two sub-algoritms are fused to delineate the final pile profile, and the algorithm has been tested and applied in different industrial burners and boilers. The experiements show that the proposed algorithm works satisfactorily.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.61-70
• /
• 2001

This paper introduces a new digitization method with sensor fusion for shape measurement in reverse engineering. Digitization can be classified into contact and non-contact type according to the measurement devices. Important thing in digitization is speed and accuracy. The former is excellent in speed and the latter is good for accuracy. Sensor fusion in digitization intends to incorporate the merits of both types so that the system can be automatized. Firstly, non-contact sensor with vision system acquires coarse 3D point data rapidly. This process is needed to identify and loco]ice the object located at unknown position on the table. Secondly, accurate 3D point data can be automatically obtained using scanning probe based on the previously measured coarse 3D point data. In the research, a great number of measuring points of equi-distance were instructed along the line acquired by the vision system. Finally, the digitized 3D point data are approximated to the rational B-spline surface equation, and the free-formed surface information can be transferred to a commercial CAD/CAM system via IGES translation in order to machine the modeled geometric shape.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.79-84
• /
• 2015

Transformer is widely used element on power system and industrial area. Especially the transformers installed at power system are exposed to an environment of arbitrary changed. Thus the prediction of degradation and the analysis of response to impulse are important. To conduct those works, the electrical characteristics of system should be analyzed, effectively. But the analysis of electrical characteristic in electric machine level such as pole and pad-mounted transformer is almost no, thus commercial VNA (Vector Network Analyzer) is used to getting the response in wide frequency range. However, the output power of VNA is usually under 10mW, so verification for effectiveness of measuring electrically large component should be conducted, firstly. Next, after getting total S-parameter of transformer, predicting impulse response can be performed in time-domain with circuit simulator. In this paper, it is introduced that verification effectiveness of VNA using transfer function from SFRA (Sweep Frequency Response Analyzer), firstly. Next, total S-parameter, six by six matix form, was built using measured 2 port S-parameter from vector network analyzer. To get the response to impulse which is defined by IEC 60060-1, time-domain simulation is conducted to ADS (Advenced Design System) circuit simulator.

• 대한전자공학회논문지TC
• /
• 제43권10호
• /
• pp.27-34
• /
• 2006

본 논문은 3[Cm] 이내의 Tag-to-Reader 잡음 공간에서도 기계 ID 인식을 정확하게 보장하는 초소형($1.4{\times}2.8[Cm^2]$) 13.56[MHz] RFID Reader를 구현하였다. 그 RFID 시스템의 작동을 위하여, 먼저, 본 논문은 13.56[MHz] RFID Air Interface ISO/IEC 규격을 따르는 전파 전파에서 후방 산란의 페이딩 모델과 Loop Antenna를 설계하였고, 다음으로 초소형 RFID RF 이슈들을 측정하고 분석하여 자동으로 경로 선택된 RF 스위칭 회로와 펌웨어의 작동 관계를 제안하였으며, 끝으로, 초소형 Reader의 본체로서 국제표준규격 ISO/IEC 18000-3이 정의한 13.56[MHz] RFID 신호의 반송과 동시에 $1{\sim}2$개 기계 ID 정보의 추출과 오류 예방을 위하여 제작된 DSP(Digital Signal Processor) 보드와 소프트웨어 기능을 제시하였다.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.31-36
• /
• 2003

Electronic or measuring instruments equipped with aspherical lens have recently been used since aspherical lens is more effective than spherical one. for the mass production of aspherical lenses, specific molds with precisely machined cores should be prepared. Some researches on the aspherical lens machining have been carried out to date. However, ultra-precise finding of aspherical or mold core has not been fully studied. In this study, the ultra-precise grinding and evaluating system were established to investigate the finding characteristics of aspherical lenses. Unlike conventional grinding process, since a highly-precise lathe were operated in a clean room without vibration the experimental results can be very useful for further studies on ultra-precise grinding process.