• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.200-206
• /
• 2016

It is necessary to develop a real-time monitoring system for electric facilities, operating and managing system for the accident prevention of electrical demand facilities anytime, anywhere. In this paper, we propose the implementation of distributing board monitoring system based on Internet of Things(IoT). The proposed system is installed in existing distributing board that it can transmit status information of distributing board and control information through the cloud server and the wireless local area network. The distributing board monitoring system can monitor and control the condition of distributing board by system administrator. The results show that the margin of error was ${\pm}5%$ in performance evaluation.

• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.391-396
• /
• 2011

During the last 5 years, maritime safety navigation with IT has been a big issue. After the International Maritime Organization defines the e-Navigation strategy, various information on board can be integrated by their needs and aims. Especially, on-board information monitoring might use the single integrated display under consideration of user convenience. To do this, this paper suggests a user interface design guideline based on definition and analysis of the integration requirements and the existing commercial product.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.40-47
• /
• 2003

This paper presents a new evaporative system monitoring method using a virtual HC sensor for an automotive on-board diagnosis. A development was made at providing mathematical expressions from the lambda control information to estimate the HC mass flow purged into the intake manifold from the canister for implementing a virtual HC sensor. The change of the lambda averagevalue reflected the influence of the additional fuel from purging results the sensor estimation of the purged HC amount. Based on this virtual HC sensor, a new evaporative system monitoring method was proposed comparing the amount of purged HC amount with the amount of the HC gas evaporated from the fuel tank and absorbed into the canister. Finally, the method was validated with a simulation using the data logged from the retail car.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.288-294
• /
• 2011

In this paper, the FPGA-based SoC board (Xilinx Virtex-4 ML401 EVM) is adopted to control electrical power inverter system. For marine application, its performance is shown on PC-based system for monitoring electrical characteristics of a power inverter using by the NMEA 2000 protocol. This power inverter system is achieved in Real-Time monitoring and control by dual micro-processor operation on embedded FPGA-based SoC board. One micro processor is for control (Control processor) electrical power inverter using by PWM signal. And the other microprocessor (Communication processor) is for communication with PC-based monitoring system. The two-processor is communicating each other using by dual-port ram (DPRAM). PC-based system user can control and monitor information of the electrical power inverter via NMEA 2000 based communication processor. Control and monitoring information includes the inverter status and configuration. SoC board converts this information to Parameter Group Numbers (PGNs) in the NMEA 2000 protocol. This system can be applied to marine power electronics for distributed power generation, transmission or regulation systems on the ship.

• KSCI Review
• /
• v.14 no.2
• /
• pp.117-122
• /
• 2006

In this paper, we designed and implemented the DCS(Distributed Control System) terminal remote monitoring board for build total unified management system based wireless communication on automatic control system fields. Also, it tested and evaluated for check an usability and performance. The board monitored relay and fuse status at power management room real-time. Therefore, we expected economic effects extend relay life-time that pre-detected errors and prevented relay fault.

• Journal of Korea Multimedia Society
• /
• v.25 no.4
• /
• pp.583-599
• /
• 2022

Although the object detection accuracy with a single image has been significantly improved with the advance of deep learning techniques, the detection accuracy for pig monitoring is challenged by occlusion problems due to a complex structure of a pig room such as food facility. These detection difficulties with a single image can be mitigated by using a video data. In this research, we propose a method in pig detection for video monitoring environment with a static camera. That is, by using both image processing and deep learning techniques, we can recognize a complex structure of a pig room and this information of the pig room can be utilized for improving the detection accuracy of pigs in the monitored pig room. Furthermore, we reduce the execution time overhead by applying a pruning technique for real-time video monitoring on an embedded board. Based on the experiment results with a video data set obtained from a commercial pig farm, we confirmed that the pigs could be detected more accurately in real-time, even on an embedded board.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.895-902
• /
• 2018

Energy consumption in buildings is close to 40% of the total national energy consumption in developed countries such as US and Japan, and Korea accounts for 24% of total energy consumption. In buildings, HVAC can't freely control the cooling flow rate according to the required calorie, so energy is not used efficiently. Therefore, by using the energy saving valve, the flow rate can be controlled by the required amount of heat and the energy can be saved. In this paper, we define basic conditions and develop control and monitoring boards for building energy saving valves based on PIC processor with low power and high cost-effectiveness. The designed board displays and transmits in real time information about two temperature values, flow values and calculated calories for temperature difference measurement. The developed board will be useful for real - time monitoring of the state of the valve in the future and development of the valve for the offshore.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.241-244
• /
• 2003

Nowadays image processing is very useful for some field of traffic applications. The one reason is we can construct the system in a low price, the other is the improvement of hardware processing power, it can be more fast to processing the data. In this study, I propose the traffic monitoring system that implement on the embedded system environment. The whole system consists of two main part, one is host controller board, the other is image processing board. The part of host controller board take charge of control the total system, interface of external environment. and OSD(On screen display). The part of image processing board takes charge of image input and output using video encoder and decoder, image classification and memory control of using FPGA, control of mouse signal. And finally, fer stable operation of host controller board, uC/OS-II operating system is ported on the board.

• Management & Information Systems Review
• /
• v.24
• /
• pp.1-24
• /
• 2008

This paper examines the direct effects of board independence and also its interaction effects with CEO's firm specific experience on firm performance. The findings in an hierarchial regression analysis of multiyear sample of computer hardware companies indicate that independent, outsider directors are beneficial to firms' performance when CEO has high-level of firm specific experience whereas it is harmful when CEO has low-level of firm specific experience. However, separating the positions of board chair and chief executive officer that has been used as another means for increasing board independence does not influence to firms' performance. These findings imply that researchers in corporate governance should reconsider the relative weight placed on directors' monitoring and assistance role. Rather than focusing predominantly on directors' willingness or ability to control executives, in future research scholars should yield more productive results by focusing on the assistance directors provide in bringing valued resources to the CEOs and in serving as a source of advice and counsel especially for CEO's improvement of management technique. In addition, they should pay more attention on identifying intervening processes between board and firm performance in order to provide optimal governance mechanisms and configurations to practitioners.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.453-460
• /
• 2004

In this thesis, remote conveyor control and monitoring system is designed and Implemented for shoes production process based on Lego prototyping mechanism by using the I/O interface control board for the ISA Interface control board. A conveyor server for real time profess control is implemented based on RTLinux(Real-Time Linux) so that users deride priority of work. And device driver is implemented bated on the RTLinux. Through this system, real-time Client/server monitoring environments Is implemented and tested. And the JMF(Java Media Framework) based monitoring system was implemented and the total processing status war monitored.