• 한국안전학회지
• /
• 제22권4호
• /
• pp.96-101
• /
• 2007

Usually pictograms embedded in safety signs are such final means to transmit hazard information that the importance of them cannot be emphasized too much. Nevertheless, in Korea, few people are interested in safety signs and their functions so that evaluation of safety signs are seldom committed nor safety signs draw workers' attention to fulfill their functions. Therefore this research aimed to standardize the procedure for developing safety signs in order not only to give practical help to industrial workers but to match them international standards, and to develop a few examples through the suggested standard procedure. As results, a procedure for developing industrial safety signs was developed by combining both ANSI Z535.3 and ISO 9186 with a special emphasis on action inducibility as the former emphasized as well as comprehensibility as the latter suggested. According to test results with undergraduate students as well as industrial workers on a few signs developed through the suggested procedure, action inducibility was higher whereas confusion rate was lower than expected on one hand, and it could be concluded that the procedure would supply results that can be satisfied on the other hand.

• 대한인간공학회지
• /
• 제36권5호
• /
• pp.601-607
• /
• 2017

Objective: A method to assess the risk level of agricultural works considering work posture and working time was suggested, and the method was applied to the major fruit crops. Background: It is not complete to analyze only work postures when assessing risk level of agricultural works. Method: $3{\times}3$ matrix was employed, in which the severity level was taken from the REBA method and exposure level was taken from the working time, using the criteria of caution zone/hazard zone. Results: Among the 5 major fruit crops(apple, pear, grape, peach, persimmon), the highest level of ergonomic risk was found in the apple and pear, while medium level was found in other 3 crops, mainly because the working time was less in the 3 crops. Conclusion: It was found that when assessing the overall ergonomic risk of agricultural works, work posture and working time should be considered at the same time. Application: The suggested method could be applied to other non-cyclic tasks.

• 한국환경보건학회지
• /
• 제32권1호
• /
• pp.1-7
• /
• 2006

This study was performed to investigate airborne lead concentration and surface lead contents in preschool facilities. Arithmetic mean of indoor lead concentration in urban area was $44.7\;ng/m^3$ (Geometric mean $32.1\;ng/m^3$) whereas outdoor concentration was $39.5\;ng/m^3$ (GM $22.8\;ng/m^3$). In rural area, airborne lead concentrations were $14.2\;ng/m^3\;(GM\;7.9 ng/m^3),\;12.6\;ng/m^3\;(GM\;5.6 ng/m^3)$, respectively. There is statistical significance of the lead concentrations among the locations of preschool facilities. About $37\%$ of qualitative lead check samples was positive and mainly was found in lead based paint. Though lead concentrations on the floor and window sill were well below the US EPA and HUD standard (floor $40\;{\mu}g/ft^2\;(4.3\;{\mu}g/100\;cm^2)$, window sill $250\;{\mu}g/ft^2\;(26.9\;{\mu}g/100\;cm^2)$, respectively), there were much samples which exceed the standard, i.e., $29\%$ of surface wall, $20\%$ of the desk and chair, $100\%$ of painted wood box of tested samples. In view of our study and hazard of lead to children, we recommended that the contents of lead in preschool facilities should be lowered as possible.

• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1994년도 교수 연수회(환경)
• /
• pp.23-56
• /
• 1994

Recent criticisms of the conduct and use of risk assessment by regulatory agencies have led to a wide range of proposed remedies, including changes in regulatory statutes and the development of new methods for assessing risk. The mandate to this Committee was more limited. Our objective was to examine whether alterations in institutional arrangements or procedures, particularly the organizational separation of risk assessment from regulatory decision-making and the use of uniform guidelines for inferring risk from available scientific information, can improve federal risk assessment activities. Before undertaking to determine whether organizational and procedural reforms could improve the performance and use of risk assessment in the federal government, the Committee examined the state of risk assessment and the regulatory environment in which it is performed. In this chapter, we define risk assessment and differentiate it from other elements in the regulatory process, analyze the types of judgments made in risk assessment, and examine its current government context. Because one chronic health hazard, cancer, was highlighted in the Committee's congressional mandate and has dominated public concern about public health risks in recent years, most of our report focuses on it. Furthermore, because activities in four agencies--the Environmental Protection Agency (EPA), the Food and Drug Administration (FDA), the Occupational Safety and Health Administration (OSHA), and the Consumer Product Safety Commission (CPSC)--have given rise to many of the proposals for changes in risk assessment practices, our review focuses on these four agencies. The conclusions of this report, although directed primarily at risk assessment of potential carcinogens as performed by these four agencies, may be applicable to other federal programs to reduce health risks.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.45-52
• /
• 2006

The AITs(autoignition temperatures) describe the minimum temperature to which a substance must be heated, without the application of a flame or spark, which will cause that substance to ignite. The AITs are often used as a factor in determining the upper temperature limit for processing operations and conditions for handling, storage and transportation, and in determining potential fire hazard from accidental contact with hot surfaces. The measurement AITs are dependent upon many factors, namely initial temperature, pressure, volume, fuel/air stoichiometry, catalyst material, concentration of vapor, time lag. Therefore, the AITs reported by different ignition conditions are sometimes significantly different. This study measured the AITs of benzene, toluene and xylene isomers from time lag using AS1M E659-78 apparatus. The experimental ignition delay times were a good agreement with the calculated ignition delay times by the proposed equations wtih a few A.A.D.(average absolute deviation). Also The experimental AITs of benzene, toluene, o-xylene, m-xylene and p-xylene were $583^{\circ}C,\;547^{\circ}C,\;480^{\circ}C,\;587^{\circ}C,\;and\;557^{\circ}C$, respectively.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.76-80
• /
• 2014

The flash point is one of the most important physical properties used to determine the fire hazard of flammable liquid mixture and defined as the lowest temperature at which a liquid produces sufficient vapor to form a combustible mixture with air. The main purpose of this paper is to measure and predict the flash point of binary flammable miscible mixtures. The flash points for n-hexanol+n-butyric acid and n-butanol+propionic acid, were measured by using Seta-flash closed cup method. The experimentally derived data were correlated with the binary interaction parameters of the van Laar and NRTL equations through the optimization method. The flash points estimated by these correlations were compared with those calculated by the method based on Raoult's law. The optimization method were found to be better than the method based on the Raoult's law.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.70-76
• /
• 2012

For the safe handling of n-tetradecane, the lower flash points and the upper flash point, fire point, AITs (auto-ignition temperatures) by ignition delay time were experimented. Also lower and upper explosion limits by using measured the lower and upper flash points for n-tetradecane were calculated. The lower flash points of n-tetradecane by using closed-cup tester were measured $104^{\circ}C$ and $112^{\circ}C$. The lower flash points and fire point of n-tetradecane by using open cup tester were measured $113^{\circ}C$ and $115^{\circ}C$, respectively. This study measured relationship between the AITs and the ignition delay times by using ASTM E659 apparatus for n-tetradecane. The experimental AIT of n-tridecane was $207^{\circ}C$. The calculated lower and upper explosion limit by using measured lower $104^{\circ}C$ and upper flash point $140^{\circ}C$ for n-tetradecane were 0.63 Vol.% and 3.18 Vol%.

• 한국안전학회지
• /
• 제25권4호
• /
• pp.19-24
• /
• 2010

A large amount of electrostatic charges is often generated on polymer powders in fluidized bed and thereby may lead to electrostatic problems. In this study, to evaluate electrostatic hazards of powder in fluidized bed, the electric field(E[v/m]) and the charge amount(q[c/g]) during fluidizing were monitored. We also investigated the Minimum Ignition Energy(MIE [J]) of sample powder used in fluidized bed with the Hartman vertical-tube apparatus. The batch-type fluidized bed system and 2kg as Polypropylene(PP) resin powders were used in the experiments. The following results were obtained: (1) Even when a safe margin of several times was considered, the values of E obtained with PP powder in this paper did not exceed 3 to 5kV/cm, at which an incendiary electrostatic discharge could occur. (2) the ave. q was -0.26${\mu}$C/g during fluidizing. This value was high enough to cause electrostatic agglomeration and adhesion. (3) the entrained PP powder in upper column due to fluidizing could be ignited by electrostatic discharges of 71mJ.

• 대한수의학회지
• /
• 제38권2호
• /
• pp.265-272
• /
• 1998

The effects of mixtures of diazinon(DA;5mg/kg), toxaphene(TOX;40mg/kg) and/or endrin(END; 5mg/kg) on the hepatic mixed-function oxygenase(MFO) system were stuided in ICR mice(18~22g) by oral intubation daily for 7 days. In general, TOX and TOX-containing mixtures were found to induced the metabolism of aminopyrine(22~60%), aniline(42~85%), phenacetin(145~194%) and benzo [a]pyrene(158~210%), and pentobaribtal biotransformation in the 9,000g liver supernatants and to increased the hepatic cytochrome p-450 contents(47~89%). Results of these may be, at least in part, associated with the MFO system. TOX pretreatment increased the aliesterase activity in the serum and liver homogenates and supernatants by 23~145%. The toxicity of TOX and TOX-containing mixtures would be lower than that of diazinon because of TOX-induced increase in the metabolism of diazinon(DA) or diazioxon(DO) and capability of TOX to stimulate the metabolism of diazinon and diazioxon and provide a pool of non-critical enzymes. These results suggest that this information might be helpful in the evaluation of the potential hazard due to occupational and/or environmental exposures to pesticides and their mixtures.

• 한국환경보건학회지
• /
• 제27권4호
• /
• pp.85-91
• /
• 2001

The regulation of Material safety data sheets(MSDS) was required for the chemicals in use in the workplace from July 1976. Under the provisions of the workplace hazardous materials information system, employers in Korea must be provided with accurate and comprehensive MSDS. To examine the reliability of MSDS for organic solvents, 63 organic solvents and MSDS were collected from the workplace of 39 companies located in Kyonggi province. Manufacture\`s MSDS were compared with the actual composition of the collected samples, and further examined the reliability by checking whether the chemicals analyzed were included in the MSDS correctly. 38 solvents were able to analyze their composition by gas chromatography-mass selective detector(GC-MSD). Among them, 28 solvents were incorrect in their composition and contents. In some case, health hazardous or carcinogenic chemicals which were not included in the MSDS were detected from samples. As a result of evaluating whether the MSDS correspond to the regulation required by Industrial Safety and Health Act (ISHA), the information in the MSDS including hazard classification, occupational exposure level, toxicity, regulatory information were incorrectly provided, and some MSDS did not disclose carcinogenic in their MSDS, and some MSDS were not written in the standard format. From this survey, continuous monitoring and promoting correct MSDS, and analyzing the components of the solvents were required to endure the reliability of MSDS for organic solvents.