• Steel and Composite Structures
• /
• 제38권1호
• /
• pp.67-78
• /
• 2021

The use of composite beams with partial interaction, with less shear connectors than those required for full interaction, may be advantageous in many situations. However, these beams tend to show higher deflections compared to beams with full interaction, and codified expressions for the calculation of such deflections are not fully developed and validated. Thus, this paper presents a comprehensive numerical study on the deflections of steel-concrete composite beams with partial interaction. Efficient numerical models of full-scale composite beams considering material nonlinearities and contact between their parts have been developed by means of the advanced software ABAQUS, including a damage model to simulate the concrete slab. The FE models were validated against experimental results, and subsequently parametric studies were developed to investigate the influence of the shear connection degree and the coefficient of friction in the deflection of composite beams. The comparison of predicted deflections using reference codes (AISC, Eurocode-4 and AS-2327.1) against numerical results showed that there are still inaccuracies in the estimation of deflections for the verification of the serviceability limit state, according to some of the analyzed codes.

• 대한토목학회논문집
• /
• 제31권6B호
• /
• pp.515-522
• /
• 2011

수리해석 모형들은 하천의 흐름에 대한 연구에 이용되거나, 수공구조물의 설계 및 하천의 설계 등 실무에 널리 사용되고 있다. 이들 수리해석 모형은 실측자료를 통한 보정이 필요하나, 홍수시 유속을 측정하는 것 자체가 위험한 작업이기 때문에 홍수시 하천의 2차원 유속분포에 대한 실측자료가 전무한 실정이다. 이러한 이유로 2차원 수치모형의 결과는 보통 몇 개 지점의 실측된 자료를 비교함으로써 보정 및 검증을 실시하고 있다. 더욱이 설계 홍수량에 대한 모형의 보정은 1차원 모형인 HEC-RAS의 모의결과를 이용하여 보정하고 있다. 본 연구에서는 일본의 토네강(Tone river)에서 홍수시 촬영한 항공사진을 분석하여 추출한 유속벡터 자료를 이용하여 하천설계 실무 및 연구 등에 널리 사용되어지고 있는 2차원 수치모형인 RAMS의 RAM2, SMS의 RMA2와 1차원 모형인 HEC-RAS 모형의 검증을 실시하였다. 또한, HEC-RAS결과를 이용한 2차원 모형의 보정에 대한 타당성을 검토하였다. 검토결과, HEC-RAS 및 RAM2, RMA2 모형의 수위모의 결과 모두 관측점의 수위와 비슷한 결과을 보이고 있었으나, 유속모의의 경우 고수부지에서의 2차원 모형에 의한 유속결과와 항공사진으로부터 추출된 유속결과가 차이를 보이고 있었다. 또한, 1차원 모형에 의한 결과와 항공사진으로부터 추출된 유속장을 단면평균한 유속과 비교한 결과 큰 오차가 발생하고 있는 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제34권11호
• /
• pp.57-70
• /
• 2018

본 논문에서는 항만구조물의 성능기반 내진설계 도입을 위해서 액상화를 포함하는 비선형 유효응력해석기법의 검증을 실시하였다. 중력식 케이슨안벽의 지진시 거동에 대해서 수치해석의 결과는 동적원심모형시험의 결과와 원형스케일로 직접 검증되었다. 중력식 안벽의 모형은 강성토조내에 지진시 과잉간극수압의 증가가 발생하는 포화 사질토 지반위에 조성되었으며, 원심가속도 60g하에서 높이 10m, 폭 6m의 케이슨 안벽을 묘사할 수 있다. 원심모형시험의 원형스케일과 동일하게 2차원 평면 변형율 조건하에서 비선형 유효응력 수치해석 모델을 구성하였다. 지반의 비선형 거동모델과 함께 Byrne의 액상화 모델을 사용하였으며, 경계요소를 적용하여 안벽과 지반의 분리거동을 묘사하였다. 검증결과, 안벽의 잔류변위를 포함하여 지반 및 안벽의 수평가속도와 안벽기초 하부 사질토 지반의 과잉간극수압 증가양상 모두 유사한 결과를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.793-795
• /
• 2002

This study shows method of measuring mechanical stresses during short circuit test, to evaluate numerical analysis of short circuit force. As test model, 400kVA transformers are used, to acquire short circuit force acceleration sensors used. Weak region of winding is found through short circuit test, and verification data of numerical calculation is obtained.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.30-48
• /
• 2011

A three-dimensional thermal-hydraulic code, CUPID, has been developed for the analysis of transient two-phase flows at component scale. The CUPID code adopts a two-fluid three-field model for two-phase flows. A semi-implicit two-step numerical method was developed to obtain numerical solutions on unstructured grids. This paper presents an overview of the CUPID code development and assessment strategy. The governing equations, physical models, numerical methods and their improvements, and the systematic verification and validation processes are discussed. The code couplings with a system code, MARS, and, a three-dimensional reactor kinetics code, MASTER, are also presented.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.359-368
• /
• 2010

This paper describes the generation and propagation of internal solitary wave in a two-layer fluid system by numerical analysis. Characteristics of interfacial soliton such as wave type, wave height, wave celerity are investigated numerically with respect to an extent of initial disturbance, fluid thicknesses of the two fluids and etc. The difference between the internal wave propagation on sloping beach and flat bottom was also examined. Laboratory experiments were conducted in the wave flume and compared with the results of numerical computation for verification.

• 한국전산유체공학회지
• /
• 제4권3호
• /
• pp.35-43
• /
• 1999

In this study, the shock wave focusing of an elliptic reflector is numerically simulated by solving the Euler equations. The numerical method is the second order upwind TVD scheme with a finite volume discretization. For the verification of the present method, we simulate the moving shock wave passing through a two-dimensional corner. The computed isopycnics are compared with the earlier experiment. Numerical results of the elliptic reflectors show that the density and pressure at the focusing point increase linearly as the aspect ratio of the reflector becomes deep. On the other hand, the gas dynamic focal length decreased with the increase of the reflector aspect ratio.

• Water Engineering Research
• /
• 제2권3호
• /
• pp.187-196
• /
• 2001

An approximate analytical solution of a nonlinear hydro-thermo coupled diffusion equation is derived using the dimensionless form of the equation and transformation method. To derive an analytical solution, it is drastically assumed that the product of first order derivatives in the non-dimensionalized governing equation has little influence on the solution of heat and moisture behavior problem. The validity of this drastic assumption is demonstrated. Some numerical simulation is performed to investigate the applicability of a derived approximate analytical solution. The results show a good agreement between analytical and numerical solutions. The proposed solution may provide a useful tool in the verification process of the numerical models. Also, the solution can be used for the analysis of one-dimensional coupled heat and moisture movements in unsaturated porous media.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.49-54
• /
• 2009

This study focus on verification of the thermal efficiency of volumetric receiver with $5kW_{th}$ Dish-type solar thermal system. Spiral flow path shaped on receiver and working fluid(steam) flow along the this flow path. Porous material for radiation-thermal conversion used in former researches are substituted with the stainless steel wall installed along the spiral shaped flow path. Numerical analysis for the flow path and temperature distributions are carried out. Numerical results are compared with experimental data. Using the numerical model, the heat transfer characteristics of spiral type receiver for dish-type solar thermal systems are known and the thermal performance of the receiver can be estimated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.211-216
• /
• 2000

Numerical studies were carried out to develop the moment magnifier method for long-term behavior of flat plates, subjected to combined in-plane compressive and transverse loads. Nonlinear finite element analyses were performed for the numerical studies. Through the numerical studies, the long term behavior of the flat plate subjected to uniform or nonuniform floor load was investigated, and creep effects on the degradation of strength and stiffness of the slabs were examined. As the result, the creep factor was developed to epitomizes with creep effect on the flat plate. The moment magnifier method using the creep factor was developed for long-term behavior of flat plates. Also, the design examples are shown for verification of proposed design method.