• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.719-724
• /
• 2002

Impact hammer is widely used as a convenient excitation tool in structural modal testing though, little is known about the dynamic characteristics of its impulse mechanism. Transmission of the impulsive force to the structure depends m the dynamic properties of the impact hammer as well as the stiffness of the tip. In this study an improved dynamic model of the impact hammer is proposed with the consideration of structure to be tested. The deformation masses of hammer tip and structure are as well as their contact stiffness. Numerical results show that this model is useful for the prediction of the impulse duration and the condition of rebounce..

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.517-522
• /
• 2002

The frequency response function(FRF) of each substructure is used for the transfer function synthesis method(TFS). The dynamic characteristics of the full system are obtained by synthesizing FRFs of each substructure. The validation of TFS depends on accuracy for FRF of each substructure. Impact hammer testing is widely used to obtain the modal characteristics of structures. However, the FRF obtained from impact hammer testing contains several errors, such as finite record length error and leakage error of which characteristic depends on data acquisition time which we call record length. In this paper, a method to remove these errors is proposed so as to enhance results of TFS. Numerical examples show that the FRF of full structure can be predicted exactly by the method proposed in this paper.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1224-1230
• /
• 2007

In this paper, we study the classification of defects at steam generator tube in nuclear power plant using eddy current testing (ECT). We consider 4 defect patterns of SG tube: I-In type, I-Out type, V-In type, and V-Out type. Through numerical analysis program based on finite element modeling, 400 ECT signals are generated by varying width and depth of each defect type. In order to improve the classification performance, we propose new feature extraction technique. After extracting new features from the generated ECT signals, multi-layer perceptron is used to classify the defect patterns. Through the computer simulation study, it is shown that the proposed method achieves 100% classification success rate while the previous method yields 91% success rate.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.1
• /
• pp.17-24
• /
• 2015

Mixed acceptance sampling plans for quantity of products in prepackages are widely used for compliance testing. To pass testing, random samples jointly comply with two legal requirements: (i) the average net content of an inspection lot shall be not less than the labelled quantity and (ii) the numbers of under-filled prepackages in a sample are less than or equal to permitted numbers. This paper discusses some drawbacks of the acceptance sampling plans and requirements recommended in OIML R87 (KS A 50087 translated by Korean) developed by the International Organization of Legal Metrology and evaluates the producer's and consumer's risks. In addition, problem of determining a target value in filling processes of prepackages under the OIML R87 requirements is addressed and illustrated with a numerical example.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.27-27
• /
• 2003

The Automated Quantitative Knife-Edge Test (AQuaKET) method was developed for testing the surface profiles of large optics with high accuracy. Testing with the required accuracy of very large telescope is not an easy job to achieve, as it is a nano-technology. There are lots of possible error sources which can occur during the measurements and in the data processing of the AQuaKET. The error sources can be categorized into 5 areas: optics, mechanics, electronics, numerical processes, and system. In this paper, possible error sources in Optics are discussed, which are intensity variation of the light source, diffraction effects, and parallax effect. In this talk, those possible error sources in optics are presented and discussed.

• International Journal of Reliability and Applications
• /
• v.15 no.2
• /
• pp.99-110
• /
• 2014

Based on the kernel function, a new test is presented, testing $H_0:\bar{F}$ is exponential against $H_1:\bar{F}$ is UBACT and not exponential is given in section 2. Monte Carlos null distribution critical points for sample sizes n = 5(5)100 is investigated in section 3. The Pitman asymptotic efficiency for common alternatives is obtained in section 4. In section 5 we propose a test statistic for censored data. Finally, a numerical examples in medical science for complete and censored data using real data is presented in section 6.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.166-168
• /
• 2005

This paper presents a new numerical algorithm devoted to one window onto fault location calculation in time domain. It is based on two terminal data processing and it is derived on the synchronized phasor measured from the GPS connected the trans-mission line. The data is obtained by the testing through EMTP (Electromagnetic Tran- sient Program). The proposed the algorithm is estimated using linear least error squares method. The results of the algorithm testing through computer simulation (MATLAB) are presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.341-349
• /
• 2002

The radar method is becoming one of the major nondestructive testing(NDT) techniques lot concrete structures. Numerical modeling of electromagnetic wane is needed to analyze radar measurement results. Finite difference-time domain(FD-TD) method can be used to simulate electromagnetic wave propagation through concrete specimens. Five concrete specimens with different thickness are modeled in 3-dimension. Radar modeling results compare measurement results to find backface of the concrete specimens and measure thickness of the concrete specimens.

• Journal of Korean Society for Quality Management
• /
• v.34 no.3
• /
• pp.66-72
• /
• 2006

The process capability indices are widely used to measure the capability of the process to manufacture items within the specified tolerance. Most evaluations on process capability indices focus on point estimates, which may result in unreliable assessments of process performance. The index $C_p$ has been widely used in various industries to assess process performance. In this paper, we propose new testing procedure on assessing $C_p$ index for practitioners to use in determining whether a given process is capable. The provided approach is easy to use and the decision making is more reliable. Whether a process is clearly normal or nonnormal, our bootstrap testing procedure could be applied effectively without the complexity of calculation. A numerical result based on the proposed approach is illustrated.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.11-23
• /
• 2011

In this study, a finite element(FE) analysis on electro-mechanical impedance response of cable-anchor connection interface under various anchor force is presented. In order to achieve the objective, the following approaches are implemented. Firstly, an interface washer coupled with piezoelectric(PZT) material is designed for monitoring cable-force loss. The interface washer is a small aluminum plate on which a PZT patch is surface-bonded. Cable-force loss could be monitored by installing the interface washer between the anchor plate and the anchorage of cable-anchor connection and examining the changes of impedance of the interface washer. Secondly, a FE model for cable-anchor connection is established to examine the effect of cable-force on impedance response of interface washer. Also, the effects of geometrical and material properties of the interface washer on impedance responses under various cable-forces are investigated. Finally, validation of the FE analysis is experimentally evaluated by a lab-scale cable-anchor connection.