• The Korean Journal of Ecology
• /
• 제21권5_1호
• /
• pp.409-418
• /
• 1998

A molel study was conducted to determine the optimal sample size for the analysis of the aquatic insect community in a stream reach of the Pangtae Creek, Kangwon-do in October 1995 and may 1996. The results showed that the required minimum sample size varied and depended on the purposes of the community analysis. Acoording to the Species: Area Curve method, at least 16 Surber samplings ($30{\times}30cm$) were required in a stream reach in each spring and fall survey. The species diversity index did not vary significantly as the sample size increased. Based on the coefficient of variation analysis, the minimum sample sizes of 10 were required in order to compare seasonal differences of the community in the study area. Considering the static community structure of aquatic insects, including both species numbers and individual numbers of aquatic insects, 11 and 7 samplings were optimal sizes for the fall and spring survey, respectively. We concluded that 12 Surber samplings from 3 riffle-pool sequences (4 samplings at each riffle-pool sequence) would be required in a stream reach (length 1 km) to obtain reliable as well as cost efficient data. Our model showed that the optimal sample size should be determined by interactions between minimum sample size, the degree of data reliability, and cost efficiency.

• 한국생활과학회지
• /
• 제12권4호
• /
• pp.553-558
• /
• 2003

The purpose of this paper was to design the sizing system of the head gears which would be a guide of men for selecting their head gears of suitable size. This study was carried out on 214 men and was done by cluster analysis with two variables(head circumference and bitragus to vertex arc length). The results were as follows : First, most of measurements were larger in men than in women. Second, the suitable numbers of size were found that 5 sizes were proper by cluster analysis with two variables. After the design of sizing system, the cover ratio was investigated in order to decide whether it is proper or not. Third, in the cover ratio, the 5 sizes were the highest in all of them.

• 한국콘텐츠학회논문지
• /
• 제7권7호
• /
• pp.39-49
• /
• 2007

다중 프로세서 환경에서 경성 실시간 태스크 집합의 스케줄링 문제를 해결하는 최적의 방법인 PF 알고리즘[13]이 제안된 이후, 이를 기반으로 하는 여러 가지 스케줄링 알고리즘들이 제안되었다. 그러나 고정된 퀀텀 크기를 기반으로 태스크들을 스케줄링하는 이들 알고리즘은 mode change 하에서 문제점을 갖는다. 이러한 문제점들을 해결하기 위한 최적의 퀀텀 크기 결정 방법이 제안된 바 있다[2]. 본 논문에서는 모든 태스크들에 대한 이용률이 $e{\le}p/3+1$의 성질을 만족하는 제한적 특성을 갖는 태스크 집합에 대해서 최적의 퀀텀 크기를 결정하기 위한 이용률 계산의 반복 횟수를 보다 감소시킬 수 있는 방법을 제안한다.

• 제어로봇시스템학회논문지
• /
• 제5권2호
• /
• pp.174-179
• /
• 1999

In this paper, we propose an optimal algorithm for finding the shortest connection of two kinds of parts to pairs. If total part numbers are of size N, then there are order 2ㆍ(N/2)$^{N}$ possible solutions, of which we want the one that minimizes the energy function. The appropriate dynamic rule and parameters used in network are proposed by a new energy function which is minimized when 3-constraints are satisfied. This dynamic nile has three important parameters, an enhancement variable connected to pairs, a normalized distance term and a time variable. The enhancement variable connected to pairs have to a perfect connection of two kinds of parts to pairs. The normalized distance term get rids of a unstable states caused by the change of total part numbers. And the time variable removes the un-optimal connection in the case of distance constraint and the wrong or not connection of two kinds of parts to pairs. First of all, we review the theoretical basis for Hopfield model and present a new energy function. Then, the connection matrix and the offset bias created by a new energy function and used in dynamic nile are shown. Finally, we show examples through computer simulation with 20, 30 and 40 parts and discuss the stability and feasibility of the resultant solutions for the proposed connection algorithm.m.

• 대한교통학회지
• /
• 제6권1호
• /
• pp.5-16
• /
• 1988

Development is given to an optimal network design method using continuous design variables. Modified Hooke-and-Jeeves algorithm is implemented in order to solve nonlinear programming problem which is approximately equivalent to the real network design problem with system efficiency crieteria and improvement cost as objective function. the method was tested for various forms of initial solution, and dimensions of initial step size of link improvements. At each searching point of evaluating the objective function, a link flow problem was solved with user equilibrium principles using the Frank-Wolfe algorithm. The results obtained are quite promising interms fo numbers of evaluation, and the speed of convergence. Suggestions are given to selections of efficient initial solution, initial step size and convergence criteria. An approximate method is also suggested for reducing computation time.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권12호
• /
• pp.1647-1651
• /
• 2004

The follicles (1.8 to 7.8 mm in diameter) were recovered from the ovaries in marketed pigs and the number of granulosa cells, the diameter of oocytes obtained from different development stages of the follicles and follicular fluid levels were determined. Correlations between size measurements and cell counts as well as the diameter of antral follicles and oocytes were also investigated. The results indicated that, while expanding in size, follicle numbers decreased with a greater atretic proportion. Granulosa cells increased in numbers continuously and remained unchanged beyond the size of 200 ${mm}^3$ in non-atretic follicles, whereas a sudden drop of granulosa counts was observed in atretic follicles. Follicular fluid, on the other hand, linearly increased its volume with follicle size and differed little between those of non-atretic and atretic follicles. Diameters of oocytes in non-atretic follicles increased to its maximum when follicles expanded to 150 ${mm}^3$ and maintained its size during later follicular expansion. It is concluded that, for in vitro culture, the optimal size of porcine follicle should be between 150 to 180 ${mm}^3$if they are collected from pre-pubertal gilts of marketing size slaughtered in an abattoir.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.325-329
• /
• 2004

Linear size expanders have been studied in many fields for the practical use, which is possibility to connect large numbers of device chips in parallel communication systems. One major limitation on the efficiency of parallel computer designs has been the prohibitively high cost of parallel communication between processors and memories. Linear size expanders can be used to construct theoretically optimal interconnection networks. In current, the defined constructions have large constant factors, thus rendering them impractical for reasonable sized networks. This paper presents an improvement on constructing concentrators using an $(n,\;k,\;2rs/(r^2-s^2))expander,$ which realizes the reduction of the size in a superconcentrator by a constant factor.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.837-842
• /
• 2010

This paper describes the crystallinity, growth rate, and surface morphology of single crystalline 3C-SiC (cubic silicon carbide) thin films grown with several carbonization conditions such as temperature, $C_3H_8$ flow rate, time. In case of carbonization, an increase in the carbonization temperature caused a increase in the size and numbers of unsealed void (big black spot) which decrease the crystallinity. In addition, optimal $C_3H_8$ flow rate made carbonization layer form well and prevented the formation of voids. Also, after a period of time, the growth of carbonization layer did not increase no more. The single crystalline 3C-SiC thin films on optimal carbonized Si substrate showed an improvement on the crystallinity, the growth rate, the roughness, and the carrier concentration.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.121-129
• /
• 1995

The objective of this research is to develop an effective inspection planning strategy for sculptured surfaces by using 3-dimensional Coordinate Measuring Machine (CMM). First, the CAD/CAM database is generated by using the Bezier surface patch mathod and variable cutter step size approach for design and machining of the workpiece model. Then, optimum measuring point locations are determained based on the mean curvature analysis to obtain more effective inspection results for the given sample numbers. An optimal probe sequence generation method is proposed by implementing the Traveling Salesperson (TSP) algorithm and new guide point selection methods are suggested based on the concepts of the variable distance between the first and second guide points. Finally, simulation study and experimental work show the effectiveness of the proposed strategy.

• 한국수산과학회지
• /
• 제24권4호
• /
• pp.248-254
• /
• 1991

1990년 8월 아산만에서 otter trawl을 이용하여 저어류를 채집하여 정점을 대표할 수 있는 저어류 군집 자료수집 방법을 추정하였다. 조사기간 중 총 17종, 957개체, 21,840g의 어류가 채집되었으며, 참서대 (Cynoglossus joyneri), 곤어리 (Thrissa koreana), 쥐노래미 (Hexagrammos otakii)와 민태 (Johnius belengerii)가 출현 빈도도 높고 개체수와 생체량에서 우점하였다. 주야 10회 반복 채집결과 종조성은 주야에 따라 유의한 차이를 보이지 않았으나, otter trawl 20분 예인의 개체수 자료는 우점종의 경우는 평균에 대하여 $2.2-385.1\%$, 전어종은 $52.2-162.0\%$의 넓은 변이를 보였다 채집면적을 늘려 갔을 때 누적종수는 예인 4회 자료 누적 이후에는 증가가 둔화되었고 종다양성지수는 3회 이후 거의 점관선에 도달하였다. 개체수의 평균에 대한 분산은 자료를 누적시켰을 때 감소하여 4회 이후에는 자료가 Poisson 분포 양상을 보였다. Otter trawl을 이용하여 아산만 저어류를 채집할 때 20분 예인 4회 이상의 자료를 합하면 정성, 정량적으로 한 조사정점을 대표할 수 있는 것으로 판단된다.