• The Korean Journal of Ecology
• /
• v.21 no.5_1
• /
• pp.409-418
• /
• 1998

A molel study was conducted to determine the optimal sample size for the analysis of the aquatic insect community in a stream reach of the Pangtae Creek, Kangwon-do in October 1995 and may 1996. The results showed that the required minimum sample size varied and depended on the purposes of the community analysis. Acoording to the Species: Area Curve method, at least 16 Surber samplings ($30{\times}30cm$) were required in a stream reach in each spring and fall survey. The species diversity index did not vary significantly as the sample size increased. Based on the coefficient of variation analysis, the minimum sample sizes of 10 were required in order to compare seasonal differences of the community in the study area. Considering the static community structure of aquatic insects, including both species numbers and individual numbers of aquatic insects, 11 and 7 samplings were optimal sizes for the fall and spring survey, respectively. We concluded that 12 Surber samplings from 3 riffle-pool sequences (4 samplings at each riffle-pool sequence) would be required in a stream reach (length 1 km) to obtain reliable as well as cost efficient data. Our model showed that the optimal sample size should be determined by interactions between minimum sample size, the degree of data reliability, and cost efficiency.

• Korean Journal of Human Ecology
• /
• v.12 no.4
• /
• pp.553-558
• /
• 2003

The purpose of this paper was to design the sizing system of the head gears which would be a guide of men for selecting their head gears of suitable size. This study was carried out on 214 men and was done by cluster analysis with two variables(head circumference and bitragus to vertex arc length). The results were as follows : First, most of measurements were larger in men than in women. Second, the suitable numbers of size were found that 5 sizes were proper by cluster analysis with two variables. After the design of sizing system, the cover ratio was investigated in order to decide whether it is proper or not. Third, in the cover ratio, the 5 sizes were the highest in all of them.

• The Journal of the Korea Contents Association
• /
• v.7 no.7
• /
• pp.39-49
• /
• 2007

Since the PF scheduling algorithm[13], which is optimal in the hard real-time multiprocessor environments, several scheduling algorithms have been proposed. All these algorithms assume the fixed unit quantum size, and this assumption has problems in the mode change environments. To settle the problem, we already proposed a method for deciding the optimal quantum size[2]. In this paper, we propose improved methods considering the task set whose utilization e is less than or equal to p/3+1. As far as the numbers of computations used to determine the optimal quantum size are concerned, newly proposed methods are proved to be more efficient than our previous ones.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.174-179
• /
• 1999

In this paper, we propose an optimal algorithm for finding the shortest connection of two kinds of parts to pairs. If total part numbers are of size N, then there are order 2ㆍ(N/2)$^{N}$ possible solutions, of which we want the one that minimizes the energy function. The appropriate dynamic rule and parameters used in network are proposed by a new energy function which is minimized when 3-constraints are satisfied. This dynamic nile has three important parameters, an enhancement variable connected to pairs, a normalized distance term and a time variable. The enhancement variable connected to pairs have to a perfect connection of two kinds of parts to pairs. The normalized distance term get rids of a unstable states caused by the change of total part numbers. And the time variable removes the un-optimal connection in the case of distance constraint and the wrong or not connection of two kinds of parts to pairs. First of all, we review the theoretical basis for Hopfield model and present a new energy function. Then, the connection matrix and the offset bias created by a new energy function and used in dynamic nile are shown. Finally, we show examples through computer simulation with 20, 30 and 40 parts and discuss the stability and feasibility of the resultant solutions for the proposed connection algorithm.m.

• Journal of Korean Society of Transportation
• /
• v.6 no.1
• /
• pp.5-16
• /
• 1988

Development is given to an optimal network design method using continuous design variables. Modified Hooke-and-Jeeves algorithm is implemented in order to solve nonlinear programming problem which is approximately equivalent to the real network design problem with system efficiency crieteria and improvement cost as objective function. the method was tested for various forms of initial solution, and dimensions of initial step size of link improvements. At each searching point of evaluating the objective function, a link flow problem was solved with user equilibrium principles using the Frank-Wolfe algorithm. The results obtained are quite promising interms fo numbers of evaluation, and the speed of convergence. Suggestions are given to selections of efficient initial solution, initial step size and convergence criteria. An approximate method is also suggested for reducing computation time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1647-1651
• /
• 2004

The follicles (1.8 to 7.8 mm in diameter) were recovered from the ovaries in marketed pigs and the number of granulosa cells, the diameter of oocytes obtained from different development stages of the follicles and follicular fluid levels were determined. Correlations between size measurements and cell counts as well as the diameter of antral follicles and oocytes were also investigated. The results indicated that, while expanding in size, follicle numbers decreased with a greater atretic proportion. Granulosa cells increased in numbers continuously and remained unchanged beyond the size of 200 ${mm}^3$ in non-atretic follicles, whereas a sudden drop of granulosa counts was observed in atretic follicles. Follicular fluid, on the other hand, linearly increased its volume with follicle size and differed little between those of non-atretic and atretic follicles. Diameters of oocytes in non-atretic follicles increased to its maximum when follicles expanded to 150 ${mm}^3$ and maintained its size during later follicular expansion. It is concluded that, for in vitro culture, the optimal size of porcine follicle should be between 150 to 180 ${mm}^3$if they are collected from pre-pubertal gilts of marketing size slaughtered in an abattoir.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.325-329
• /
• 2004

Linear size expanders have been studied in many fields for the practical use, which is possibility to connect large numbers of device chips in parallel communication systems. One major limitation on the efficiency of parallel computer designs has been the prohibitively high cost of parallel communication between processors and memories. Linear size expanders can be used to construct theoretically optimal interconnection networks. In current, the defined constructions have large constant factors, thus rendering them impractical for reasonable sized networks. This paper presents an improvement on constructing concentrators using an $(n,\;k,\;2rs/(r^2-s^2))expander,$ which realizes the reduction of the size in a superconcentrator by a constant factor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.837-842
• /
• 2010

This paper describes the crystallinity, growth rate, and surface morphology of single crystalline 3C-SiC (cubic silicon carbide) thin films grown with several carbonization conditions such as temperature, $C_3H_8$ flow rate, time. In case of carbonization, an increase in the carbonization temperature caused a increase in the size and numbers of unsealed void (big black spot) which decrease the crystallinity. In addition, optimal $C_3H_8$ flow rate made carbonization layer form well and prevented the formation of voids. Also, after a period of time, the growth of carbonization layer did not increase no more. The single crystalline 3C-SiC thin films on optimal carbonized Si substrate showed an improvement on the crystallinity, the growth rate, the roughness, and the carrier concentration.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.121-129
• /
• 1995

The objective of this research is to develop an effective inspection planning strategy for sculptured surfaces by using 3-dimensional Coordinate Measuring Machine (CMM). First, the CAD/CAM database is generated by using the Bezier surface patch mathod and variable cutter step size approach for design and machining of the workpiece model. Then, optimum measuring point locations are determained based on the mean curvature analysis to obtain more effective inspection results for the given sample numbers. An optimal probe sequence generation method is proposed by implementing the Traveling Salesperson (TSP) algorithm and new guide point selection methods are suggested based on the concepts of the variable distance between the first and second guide points. Finally, simulation study and experimental work show the effectiveness of the proposed strategy.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.4
• /
• pp.248-254
• /
• 1991

The demersal fishes of Asan Bay were collected by an otter trawl in August 1990 to determine optimum sample size for the analysis of community structure. A total of 17 species comprising 957 individuals and 21,840 grams in biomass was collected. Predominant species were Cynoglossus joyneri, Thrissa koreana, Hexagrammos otakii and Johnius belengerii. Coefficients of variation for fish numbers in ten replicate tows ranged from 2.2 to $385.1\%$ for four abundant species and from 52.2 to $162.0\%$ when all species were considered. The cumulative number of species increased rapidly until 4 hauls, and less than 1 species per haul in average was added thereafter. The cumulative diversity index reached nearly an asymptote value when three of samples were combined. Variance in the number of individuals diminished as the sample size increased. The ratio of variance to mean numbers (dispersion index) was not significantly different from the unity when first 4-haul samples were combined. Four of 20-minute trawl haul are proposed to be a proper sampling size for the unbiased estimation of abundance in the study area.