• Anatomy and Cell Biology
• /
• 제56권3호
• /
• pp.342-349
• /
• 2023

This study was conducted to investigate the clinical and anatomical importance of the relevant region from the perspective of surgical approaches by determining the morphometric analysis of the craniocervical junction and foramen magnum (FM) region and determining their distances from important anatomical points. This research was carried out with 59 skulls found at the Anatomy Laboratories of Erciyes and Ankara Medipol University. Metric measurements of FM and condyle, FM shape, condyle-fossa relationship, and pharyngeal tubercle (PT) were made in mm-based dry bone samples of unknown age and sex. The distance between the anterior notches and the FM was 87.01±4.35, the distance between the anterior notches and the PT was 77.70±4.24, the distance between the PT-sphenooccipital junction was 13.23±2.42, and the FM index was 81.86±7.47. The anteroposterior and transverse lengths of FM were determined as 33.80±2.99 and 27.72±2.30, respectively. The morphometric and morphological data available regarding the craniocervical junction showed significant differences between populations. Comprehensive knowledge of this topic will provide a better approach to treat Arnold Chiari Malformation, FM meningiomas, and other posterior cranial fossa lesions. Therefore, we believe that FM and craniocervical junction morphology will be a guide not only for anatomists, but also for radiologists, neurosurgeons, ENT surgeons, and orthopedists.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.721-724
• /
• 1999

The concrete structure under fatigue load depresses in mechanical capability or breaks down finally because of the fatigue. So recently the study on strengthening methods using bonded plate is widely attended. Which could be constructed under use and without damaging the structure. The intention of this method is to increase the useability of the structure and to recover the strength. So application on fields are sharply increasing. In this study it is tried to develop strengthening methods using notches and anchor bolts which could supply the defect on falling off of the plate at the end.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.703-708
• /
• 1999

The concrete structure under fatigue load depresses in mechanical capability or breaks down finally because of the fatigue. So recently the study on strengthening methods using bonded steel plate is widely attended. Which could be constructed under use and without damaging the structure. The intention of this method is to increase the useability of the structure and to recover the strength. So application on fields are sharply increasing. In this study it is tried to develop strengthening methods using notches and anchor bolts which could supply the defect on falling off of the steel plate at the end.

• 대한전자공학회논문지
• /
• 제23권2호
• /
• pp.178-181
• /
• 1986

Dielectric waveguide gratings of the image-guide type can be made by periodically cutting notches on the sides or in the top is the image guide. In this paper modeling of grattings using a transmission-line equivalent circuit with equal line lenghth is biscussed, and systematic design procedure of dielectric-waveguide bandpass filter using coupled gratings is presented. It is shown that experimental results is in excellent agreement with the computed response.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.274-276
• /
• 2009

This paper presents a rotor shape optimization of interior type permanent magnet (IPM) motor for cogging torque minimization and maximization of reluctance torque. In order to minimize the cogging torque, the optimal notches are put on the rotor pole face and the arc type pole face is applied. The variations of cogging torque and d-q axis inductions are analyzed by finite element method (FEM).

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.140-141
• /
• 2006

Most PM components are exposed to cyclic loading over long periods of time, yet, the fatigue performance is often at best characterized by a fully reversed bending strength. The effects of density, deviating loading modes, external notches or mean stresses must usually be estimated. The amount of available data is nowadays sufficient to come to fact-based estimates.

• 대한토목학회논문집
• /
• 제32권1A호
• /
• pp.39-48
• /
• 2012

본 논문에서는 V형 노치 및 반원형 노치 균열을 갖는 패치보강 적층판의 응력확대계수 산정을 위하여 수치해석적 방법을 사용한다. p-수렴 비등매개변수 모델이 고려되고, 이와 같은 비등매개변수 모델의 결과를 활용한 3차원 가상균열닫힘법에 대한 식이 표현된다. 1차원 로바토 함수로부터 확장된 3차원 계층적 형상함수를 가지고서, 임의의 요소에서의 변위장의 변위-변형률 관계와 3차원 구성방정식이 표현된다. 원형경계의 기하형상을 나태내기 위해 초유한사상기법을 사용한다. 응력집중계수, 응력분포, 자유도, 그리고 무차원 응력확대계수 등의 항목에 대해서, 제안된 모델의 정확도와 단순성이 기존의 결과들과의 비교를 통해 설명된다. 균열 적층판의 폭, 높이, 노치근입부의 반경, V형 노치의 경사각, 균열길이 등의 변화에 따른 응력확대계수가 산정된다.

• Computers and Concrete
• /
• 제21권2호
• /
• pp.189-197
• /
• 2018

A discrete element approach is used to investigate the effects of confining stress on the shear behaviour of joint's bridge area. A punch-through shear test is used to model the concrete cracks under different shear and confining stresses. Assuming a plane strain condition, special rectangular models are prepared with dimension of $75mm{\times}100mm$. Within the specimen model and near its four corners, four equally spaced vertical notches of the same depths are provided so that the central portion of the model remains intact. The lengths of notches are 35 mm. and these models are sequentially subjected to different confining pressures ranging from 2.5 to 15 MPa. The axial load is applied to the punch through the central portion of the model. This testing and models show that the failure process is mostly governed by the confining pressure. The shear strengths of the specimens are related to the fracture pattern and failure mechanism of the discontinuities. The shear behaviour of discontinuities is related to the number of induced shear bands which are increased by increasing the confining pressure while the cracks propagation lengths are decreased. The failure stress and the crack initiation stress both are increased due to confining pressure increase. As a whole, the mechanisms of brittle shear failure changes to that of the progressive failure by increasing the confining pressure.

• 한국전자파학회논문지
• /
• 제15권8호
• /
• pp.781-787
• /
• 2004

본 논문에서는 셀룰러/PCS/IMT-2000서비스를 동시에 수용할 수 있는 기지국용 다중대역 평판 안테나를 설계 및 제작하였다. 설계된 안테나는 두 개의 유전체 층과 폼 물질로 구성되었고 마이크로스트립 패치의 길이 방향과 너비 방향에 노치가 삽입되었다. 안테나의 광대역 특성을 위해서, 공진 개구면을 가지는 개구면 결합 안테나에 폼 물질을 사용하였으며, 패치의 너비 방향에 노치를 삽입하여 이중 공진 특성을 얻었다. 이를 통해, 광대역 특성을 유지하면서 주파수비( $f_{H/}$ $f_{L}$)가 1:2를 넘는 이중 공진 특성을 얻을 수 있었다. 설계된 안테나의 대역폭은 전압정재파비 1.5 이하로 셀룰러/PCS/IMT-2000 대역을 모두 만족하였고 측정된 안테나의 대역폭은 전압정재파비 1.5 이하로 셀룰러 대역에서 77 MHz, PCS/IMT-2000대역에서 550 MHz이며, 이득은 전 대역에서 약 5.65 dBi에서 7.4 dBi를 얻을 수 있었다.다.다.

• 비파괴검사학회지
• /
• 제20권1호
• /
• pp.1-9
• /
• 2000

본 연구에서는 유도초음파를 이용하여 열 교환기와 증기발생기 튜브의 결함을 비파괴적으로 탐상하고 그 크기를 산정하였다. 이론적인 해석을 위해 인코넬 (Inconel) 튜브에 대한 위상 및 군속도 분산선도를 Longitudinal 모드와 Flexural 모드에 대해 구하였다. 튜브의 원주방향 레이저노치와 튜브 지지대 하단의 방전가공결함(EDM wear)을 각각 비대칭 및 대칭 탐촉자 세트를 사용하여 탐상하였다. 실험결과 방전가공결함은 L(0, 2), L(0, 3), L(0, 4) 모드로 탐상되었으며, 그 중 L(0, 4) 모드가 결함으로부터 가장 잘 반사되었다. 레이저노치의 경우에는 L(0, 1) 모드 주변의 Flexural 모드가 결함을 탐상하고 크기를 산정하는데 사용될 수 있음을 보였다.