KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Three-Dimensional Virtual Crack Closure Technique Based on Anisoparametric Model for Stress Intensity Factors of Patch Repaired Plates with Cracks at Notches

접착 보강된 노치 균열판의 응력확대계수 산정을 위한 비등매개변수 모델 기반의 3차원 가상균열닫힘법

  • 안재석 (영남대학교 건설시스템공학과) ;
  • 우광성 (영남대학교 건설시스템공학과)
  • Received : 2011.11.04
  • Accepted : 2011.12.29
  • Published : 2012.02.29
Download PDF
⟨ Previous Next ⟩

Abstract

This study deals with numerical determination of stress intensity factors of adhesively patch-repaired plates with cracks at V-shaped or semicircular notches. The p-convergent anisoparametric model are considered and then three-dimensional virtual crack closure technique is presented using formulations of anisoparametric elements. In assumed displacement fields of an element, strain-displacement relations and three-dimensional constitutive equations are derived with three-dimensional hierarchical shape functions expanded from one-dimensional Lobatto functions. Transfinite mapping technique is used to represent a circular boundary. The present model provides accuracy and simplicity in terms of stress concentration factor, stress distribution, the number of degrees of freedom, and non-dimensional stress intensity factor as compared with previous works in literatures. Stress intensity factors obtained by the three-dimensional virtual crack closure technique are estimated with respect to the variation of width of finite plate, radius of notch root, angular inclination of V-shaped notch, and crack length.

본 논문에서는 V형 노치 및 반원형 노치 균열을 갖는 패치보강 적층판의 응력확대계수 산정을 위하여 수치해석적 방법을 사용한다. p-수렴 비등매개변수 모델이 고려되고, 이와 같은 비등매개변수 모델의 결과를 활용한 3차원 가상균열닫힘법에 대한 식이 표현된다. 1차원 로바토 함수로부터 확장된 3차원 계층적 형상함수를 가지고서, 임의의 요소에서의 변위장의 변위-변형률 관계와 3차원 구성방정식이 표현된다. 원형경계의 기하형상을 나태내기 위해 초유한사상기법을 사용한다. 응력집중계수, 응력분포, 자유도, 그리고 무차원 응력확대계수 등의 항목에 대해서, 제안된 모델의 정확도와 단순성이 기존의 결과들과의 비교를 통해 설명된다. 균열 적층판의 폭, 높이, 노치근입부의 반경, V형 노치의 경사각, 균열길이 등의 변화에 따른 응력확대계수가 산정된다.

Keywords

References

  1. 우광성(1992) Transfinite interpolation technique for p-version of F.E.M., 한국전산구조공학회논문집, 한국전산구조공학회, Vol. 5, No. 1, pp. 75-82.
  2. 우광성, 양승호, 안재석, 신영식(2009) p-수렴 완전층별모델에 의한 일면패치로 보강된 원공 적층판의 휨효과, 한국전산구조공학회논문집, 한국전산구조공학회, Vol. 22, No. 5, pp. 463-474.
  3. Achour, T., Bouiadjra, B.B., and Serier, B. (2003) Numerical analysis of the performances of the bonded composite patch for reducing stress concentration and repairing cracks at notch, Comp. Mater. Sci., Vol. 28, pp. 41-48. https://doi.org/10.1016/S0927-0256(03)00054-5
  4. Ahn, J.S., Basu, P.K., and Woo, K.S. (2010) Analysis of cracked aluminum plates with one-sided patch repair using p-convergent layered model, Finite Elem. Anal. Des., Vol. 46, pp. 438-448. https://doi.org/10.1016/j.finel.2010.01.008
  5. Ahn, J.S. and Basu, P.K. (2011a) Locally refined p-FEM modeling of patch repaired plates, Compos. Struct., Vol. 93, pp. 1704-1716. https://doi.org/10.1016/j.compstruct.2011.01.016
  6. Ahn, J.S., Basu, P.K., and Woo, K.S. (2011b) Hierarchic layer models for anisotropic laminated plates, KSCE J. Civ. Eng., Vol. 6, No. 6, pp. 1067-1080.
  7. ANSYS User's Manual, Version 8.0, Swanson Analysis Systems Inc., Houston, PA, 2004.
  8. Baker, A.A. (1984) Repair of cracked or defective metallic aircraft components with advanced fibre composites - an overview of Australian work, Compos. Struct., Vol. 2, pp. 153-181. https://doi.org/10.1016/0263-8223(84)90025-4
  9. Krauthammer, T. (1979) Accuracy of the finite element method near a curved boundary, Comput. Struct., Vol. 10, No. 6, pp. 921-929. https://doi.org/10.1016/0045-7949(79)90061-0
  10. Krueger, R. (2002) The virtual crack colsure technique: history, approach and applications, NASA/CR-2002-211628, ICASE Report No. 2002-10.
  11. Kumar, A.M. and Singh R. (1997) 3D finite element modelling of a composite patch repair, Proc. Inter. Conf. Fract., pp. 2159- 2166.
  12. Megueni, A., Bouiadjra, B.B., and Belhouari, M. (2004) Disbond effect on the stress intensity factor for reparing cracks with bonded composite patch, Comp. Mater. Sci., Vol. 29, pp. 407-413. https://doi.org/10.1016/j.commatsci.2003.11.001
  13. Molent, L., Callinan, R.J., and Jones, R. (1989) Design of an all boron/epoxy doubler reinforcement for the F-111C wing pivot fitting: structural aspects, Compos. Struct., Vol. 1, No. 1, pp. 57-83.
  14. Naboulsi, S. and Mall, S. (1996) Modeling of a cracked metallic structure with bonded composite patch using the three layer technique, Compos. Struct., Vol. 35, pp. 295-308. https://doi.org/10.1016/0263-8223(96)00043-8
  15. Ouinas, D., Bouiadjra, B.B, Serier, B., and Bekkouche M.S. (2007) Comparision of the effectiveness of boron/epoxy and graphite/ epoxy patches for repaired crackes emanating from a semicircular notch edge, Compos. Struct., Vol. 80, pp. 514-522. https://doi.org/10.1016/j.compstruct.2006.07.005
  16. Papanikos, P., Tserpes, K.I., and Pantelakis, S. (2007) Initiation and propagation of composite patch debonding in adhesively repaired cracked metallic sheets, Compos. Struct., Vol. 81, pp. 303-311. https://doi.org/10.1016/j.compstruct.2006.08.022
  17. Rybicki, E.F. and Kanninen, M.F. (1977) A finite element calculation of stress intensity factors by a modified crack closure integral, Eng. Fract. Mech., Vol. 9, pp. 931-938. https://doi.org/10.1016/0013-7944(77)90013-3
  18. Schubbe, J.J. and Mall, S. (1999) Modeling of cracked thick metallic structure with bonded composite patch repair using threelayer technique, Compos. Struct., Vol. 45, No. 3, pp. 185-193.
  19. Solin, P., Segeth, K., and Dolezel, I. (2004) Higher-order finite element methods, Chapman & Hall/CRC.
  20. Sun, C.T., Klug, J., and Arendt, C. (1996) Analysis of cracked aluminum plates repaired with bonded composite patches, AIAA J., Vol. 34, No. 2, pp. 369-374. https://doi.org/10.2514/3.13073
  21. Teh, L.S. and Brennan, F.P. (2007) Evaluation of mode I stress intensity for edge cracks from 2-D V-notches using composition of constituent SIF weight functions, Int. J. Fatigue, Vol. 29, pp. 1253-1268. https://doi.org/10.1016/j.ijfatigue.2006.10.012
  22. Tong, L. and Sun, X. (2003) Nonlinear stress analysis for bonded patch to curved thin-walled structures, Int. J. Adhes. Adhes., Vol. 23, No. 5, pp. 349-364. https://doi.org/10.1016/S0143-7496(03)00063-0
  23. Woo, K.S. (1993) Robustness of hierarchical element formulated by integrals of legendre polynomials, Comput. Struct., Vol. 49, pp. 421-426. https://doi.org/10.1016/0045-7949(93)90043-D
  24. Yan, X. (2007) Rectangular tensile sheet with single edge crack or edge half-circular-hole crack, Eng. Fail. Anal., Vol. 14, pp. 1406-1410. https://doi.org/10.1016/j.engfailanal.2006.11.011
  25. Yong, L. and Yue, Z.Q. (1993) Automatic grid generation for twodimensional viscoplastic boundary element methods by the transfinite mapping method, Comput. Struct., Vol. 48, No. 1, pp. 107-119. https://doi.org/10.1016/0045-7949(93)90462-M