• Journal of Sensor Science and Technology
• /
• v.16 no.1
• /
• pp.39-43
• /
• 2007

This paper presents characteristics of surface acoustic wave (SAW) gas sensor for detecting volatile gases such as acetone, methanol, and ethanol by measuring phase shift of output signal. A delay-line by combining with a center frequency of 200 MHz was fabricated on S-T Quartz substrates. Using gas chromatography column, the selectivity of the SAW gas sensor were introduced. Experimental results, which show the phase change of output signal under the absorption of volatile gas on sensor surface, were presented. This SAW gas sensor system may be well suited for a high performance electronic nose system.

• Journal of Korea Multimedia Society
• /
• v.8 no.4
• /
• pp.461-472
• /
• 2005

In this paper, we propose face feature extraction algorithm through stereo image's matching value. The proposed algorithm detected face region by change the RGB color space of skin color information to the YCbCr color space. Applying eye-template from extracted face region geometrical feature vector of feature about distance and lean, nose and mouth between eye extracted. And, Proposed method could do feature of eyes, nose and mouth through stereo image's matching as well as 2D feature information extract. In the experiment, the proposed algorithm shows the consistency rate of 73% in distance within about 1m and the consistency rate of 52%in distance since about 1m.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.7
• /
• pp.575-580
• /
• 2007

During the conceptual design phase of a canard type high maneuverable aircraft, the low speed small scale wind tunnel test was conducted to investigate the high angle-of-attack static stability of the aircraft. In this study, 1/50th scale generic canard-body-wing model was used for the small scale wind tunnel test. For the analysis of static stability including high angle-of-attack nonlinear characteristics, the vertical tail effects were studied due to canard deflections. In addition, the nose chine effects were studied at high angle-of-attack. Based on the results obtained from the experimental study, the configuration change effects for canard type aircraft on high angle-of-attack static stability have been able to analyze.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.599-604
• /
• 2000

In order to study unsteady aerodynamic loads on high speed trains passing by each other at the speed of 350km/h, three-dimensional flow fields around trains during the crossing event are numerically simulated using the three-dimensional Euler equations. The Roe's FDS with MUSCL interpolation is employed to simulate wave phenomena properly. An efficient moving grid system based on domain decomposition techniques is developed to analyze the unsteady flow field induced by the restricted motion of a train on a rail. The numerical simulations of the trains passing by on the double-track are carried out to study the effect of the train nose-shape, the train length and the existence of tunnel when the crossing event occur. Unsteady aerodynamic loads side force and drag force-acting on the train during the crossing are numerically predicted and anlayzed. It is found that the strength of the side force mainly depends on the nose-shape, and that of drag force on tunnel existence. And it is observed that the push-pull like impulsive force successively acts on each car and acts in different directions between the neighborhood cars. The maximum change of the impulsive force reaches about 3 tons. These aerodynamic force data are absolutely necessary for the evaluation of the stability of the high speed multi-car train. The results also indicate the effectiveness of the present numerical method for the simulation of unsteady flow field induced by the bodies in the relative motion.

• Journal of Sensor Science and Technology
• /
• v.16 no.5
• /
• pp.349-354
• /
• 2007

This paper presents characteristics of surface acoustic wave (SAW) gas sensor for detecting volatile gases such as ethanol gas by measuring the phase shift of output signal. A delay-line with a center frequency of 400 MHz was fabricated on $128^{\circ}$ Y-Z $LiNbO_{3}$ substrates. Experimental results, which showed the phase change of the output signal under the absorption of volatile gas on sensor surface, were presented. The sensitivities of SAW delay lines coated with polyurethane films were greatly increased compared to those for uncoated devices. This SAW gas sensor system may be well suited for a high sensitivity electronic nose system.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.2
• /
• pp.198-204
• /
• 1998

This study was conducted to evaluate the effect of far IR radiation for the elimination of sidestream smoke components in a closed room. The measurements covered particle sizes of 13.8-542.5 nm, particle concentration, TSP, UVPM, FPM, solanesol, and the following gases and vapor components of smoke: carbon dioxide, carbon monoxide, nicotine, and 3-ethenyl-pyridine. Also, the changes of smoke odor strength by far IR radiation were tested by using the electronic nose system. There was no difference between control and far IR radiation in changes of the concentration of $CO_2$ and CO. The concentrations of TSP, UVPM, FPM, solanesol, nicotine, and 3-ethenylpyridine were reduced by far IR radiation. The growth and diminishing rate of RSP diameter was accelerated by far IR radiation compared with control. There was a little difference of smoke odor change with far IR radiation by electronic nose system analysis. Our results indicated that the use of far IR radiation had a little effect on changes of solid, vapor, and odor of smoke, but it had no effect on gaseous components.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.364-364
• /
• 2007

This paper presents characteristics of surface acoustic wave (SAW) gas sensor for detecting volatile gases such as ethanol gas by measuring phase shift of output signal. A delay-line with a center frequency of 400MHz was fabricated on 128o Y-Z $LiNbO_3$ substrates. Experimental results, which show the phase change of output signal under the absorption of volatile gas on sensor surface, were presented. The sensitivities of SAW delay lines coated with polyurethane films are greatly increased compared to those for uncoated devices. This SAW gas sensor system may be well suited for a high sensitivity electronic nose system.

• Current Research on Agriculture and Life Sciences
• /
• v.30 no.1
• /
• pp.51-59
• /
• 2012

Fresh oyster mushrooms (Pleurotus ostreatus) were gamma-irradiated at 0, 1, 2, and 3 kGy. The effects on various quality attributes were determined during storage at $5{\pm}1^{\circ}C$. Color changes were more prominent in the cap region than the stem part. At the start of storage increase of Hunter's L-value (lightness) was observed in the caps of 2 and 3 kGy-irradiated samples. The L-value was higher in the all irradiated samples during storage. The trend was different in the case of stem region, where L-value decreased upon irradiation, but remained high throughout storage. The ${\alpha}$-value declined, whereas the b-value increased following irradiation. Irradiation showed a dose-dependent effect on the firmness, which was clearer during storage, but the samples irradiated at 1 kGy maintained an overall better texture than other irradiated samples. The weight loss was also higher in the all irradiated samples during storage. The samples irradiated at 1 kGy showed good physical appearance without any fungal attack at the end of storage; however color change in cap region was quite apparent. The ultra-structural drastic effect of irradiation was understandable using scanning electron microscopy. E-nose analysis demonstrated a clear change in the volatile profiles of all irradiated samples. Although the effect of irradiation on quality characteristics was quite clear but the all irradiated samples were free from fungal attack that was observed in the case of control sample.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.94-100
• /
• 2000

This paper presents a methodology for In-Process monitoring of tool wear by using ultrasonic sensor in turning operation. An integrated single ultrasonic transducer operation at a frequency of 10MHz is placed in contact with the insert tip. The change in amount of the reflected energy from the nose and flank of the tool can be related to the level of tool wear and the mechanical integrity of the tool. As the results, the tool wear monitoring system based on the ultrasonic pulse-echo method was proposed, it is useful to determine a tool life and tool change time.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.19 no.3 s.31
• /
• pp.60-67
• /
• 2006

Objective : Allergic rhinitis is an allergic reaction characterized by sneezing, coughing, itchy nose, mouth and throat, congestion and/or nasal discharge. We aim to observe effect of Sinichengpae-um on protective effects of nasal mucosal tissue in th allergic rhinitis. Method : For this purpose, we oberserved number of leukocyte and erythrocyte in blood, ratio of neutrophil and lymphocyte in leukocyte, activity of GOT and GPT, and histopathologic change of nasal mucose. Result and Conclusion : Sinicheogpae-um showed effects on immune reaction with no harms liver. And in histopathologic change of nasal mucosal tissue, Sinichengpae-um showed significant protective effet against allergic rhinitis.