• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.316-318
• /
• 1992

The proposed algorithm uses a modified adaptive law which consists of switching -modification, normalized augmented error and low-pass filtered signal of output tracking error, furthermore, the proportional term that is a product of the output tracking error and the bounded signal having an information of output tracking error is added to the conventional control law for improvement of robustness and performance of an adaptive system. For the arbitrary nth order system, mathematical analysis and computer simulation are used to demonstrate improvement of output error characteristics, guaranteeing boundedness of all signals in the overall system.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2415-2418
• /
• 2014

In this report, the contact resistance between "electrode" and "lead" is investigated for reasonable measurements of samples' resistance in a polypyrrole (PPy) nanowire device. The sample's resistance, including "electrode-lead" contact resistance, shows a decrease as force applied to the interface increases. Moreover, the sample's resistance becomes reasonably similar to, or lower than, values calculated by resistivity of PPy reported in previous studies. The decrease of electrode-lead contact resistance by increasing the applying force was analyzed by using Holm theory: the general equation of relation between contact resistance ($R_H$) of two-metal thin films and contact force ($R_H{\propto}1/\sqrt{F}$). The present investigation can guide a reliable way to minimize electrode-lead contact resistance for reasonable characterization of nanomaterials in a microelectrode device; 80% of the maximum applying force to the junction without deformation of the apparatus shows reasonable values without experimental error.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.391-396
• /
• 1998

Modified product Consistency Test (M-PCT) has been developed as an alternative to other existing methods in determining the leachability of glass. M-PCT, the leaching method, is a hybrid of MCC-l and PCT, but can provide quicker sample preparation. Larger diameter glass sample (1.0-2.0 mm) than in the PCT method can be used so that the glass beads are more easily produced and cleaned. From the M-PCT, the total mass loss (ML) of glass, the normalized elemental release rate (NLi), pH value of leachate have been obtained. For some selected glasses in which leaching rates have been known, their chemical durablility have been tested using the M-PCT method. The results are compared to the literature data for the glasses. It is found that M-PCT method is reasonable and suitable in determining the leachability of Low and Intermediate level Radioactive Waste glass form, such as the pH, elemental loss and total mass loss.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.204-207
• /
• 2008

The purpose of this study is to identify how much the MODIS NDVI (Normalized Difference Vegetation Index) can explain the soil moisture simulated from SWAT (Soil and Water Assessment Tool) continuous hydrological model. For the application, ChungjuDam watershed (6,661.3 $km^2$) was adopted which covers land uses of 82.2 % forest, 10.3 % paddy field, and 1.8 % upland crop respectively. For the preparation of spatial soil moisture distribution, the SWAT model was calibrated and verified at two locations (watershed outlet and Yeongwol water level gauging station) of the watershed using daily streamflow data of 7 years (2000-2006). The average Nash and Sutcliffe model efficiencies for the verification at two locations were 0.83 and 0.91 respectively. The 16 days spatial correlation between MODIS NDVI and SWAT soil moisture were evaluated especially during the NDVI increasing periods for forest areas.

• Journal of Environmental Science International
• /
• v.9 no.3
• /
• pp.209-214
• /
• 2000

The preventive effects of sodium molybdate on the acute toxicity of lead were studied by investigating tissue accumulation of lead, changes of nerve conduction velocity and concentrations of metabolites related to function of sciatic nerve in rats treated with lead, sodium molybdate and both, respectively. In lead-intoxicated rat, the conduction velocity, myo-inositol concentration and $Na^{+}/K^{+}$ ATPase activity of sciatic nerve were decreased by about 33 %, 48 % and 58 %, respectively. However, sodium molybdate treatment significantly normalized the conduction velocity, $Na^{+}/K^{+}$ ATPase activity and myo-inositol concentration of sciatic nerve in lead-intoxicated rat. Also, sodium molybdate treatment decreased the contents of lead in blood and sciatic nerve through promotion of urinary excretion of lead. But sodium molybdate treatment did not affect the glucose concentration in sciatic nerve. These results suggest that sodium molybdate prevented peripheral neuropathy not only by reducing lead contents in sciatic nerve and blood, but also by enhancing $Na^{+}/K^{+}$ ATPase activity in sciatic nerve.

• Journal of the Korean Statistical Society
• /
• v.28 no.2
• /
• pp.235-251
• /
• 1999

In this paper we examine extremal behavior of a $textsc{k}$th-order stationary Markov chain {X\ulcorner} by considering excesses over a high level which typically appear in clusters. Excesses over a high level within a cluster define a cluster damage, i.e., a normalized sum of all excesses within a cluster, and all excesses define a damage point process. Under some distributional assumptions for {X\ulcorner}, we prove convergence in distribution of the cluster damage and obtain a representation for the limiting cluster damage distribution which is well suited for simulation. We also derive formulas for the mean and the variance of the limiting cluster damage distribution. These results guarantee a compound Poisson limit for the damage point process, provided that it is strongly mixing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.579-580
• /
• 2006

In this study, an injection mold of tensile test specimen was manufactured by international standard. Pressure and temperature in the cavity of the injection mold was measured by sensors. Simulation of injection molding process was performed with the same condition of experiment and linear structural tensile analysis was also performed with the initial condition of the residual stress induced by injection molding analysis. Normalized elastic coefficient of tensile test was compared with that of structural analysis. It was shown that the residual stress induced by injection molding has an effect on both the experiment of tensile test and linear structural analysis.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1408-1411
• /
• 2002

In this paper, we propose a method that converts motion vectors on MPEG coded domain as a uniform set, independent of the frame type and the direction of prediction, and directly utilizes these normalized motion vectors for understanding video contents. This frame-type-independent motion vectors are utilized as feature information for image retrieval or moving object tracking on compressed domain. By simulation, we evaluate the effectiveness of the proposed method and compare its performance to the conventional method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.128-132
• /
• 2004

This paper presents the design, fabrication sequence and measurement results of a highly sensitive capacitive-type humidity sensor using a polyimide film without hydrophobic elements. The structure of the humidity sensor is MIM (metalinsulator-metal). For a high sensitivity, a modified aromatic polyimides as a moisture absorbing layer has been synthesized instead of using general polyimides containing hydrophobic elements. The polyimide film was obtained by synthesizing and thermally polymerizing polyamic acid composed of m-pyromellitic dianhydride, phenelenediamine and dimethylacetamide. Characteristics of fabricated sensors which include sensitivity, hysteresis and stability have been measured. The measurement result shows the percent normalized capacitance change of 0.37/%RH over a range from 10 to 90%RH, hysteresis of 0.77% over the same %RH range and maximum drift of 0.25% at 50%RH. The result shows that the developed humidity sensor can be applied to evaluate a hermeticity of various sensors and actuator systems as well as micro packages.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.2
• /
• pp.317-325
• /
• 2010

In this paper, we develop four modified empirical distribution function (EDF) type tests using approximate maximum likelihood estimators for the half-logistic distribution based on multiply Type-II censored samples. We also propose modified normalize sample Lorenz curve polt and new test statistics. We compare the above test statistics in the sense of the power for various censored samples. We present an example to illustrate this method.