• Journal of Acupuncture Research
• /
• v.24 no.4
• /
• pp.13-23
• /
• 2007

Objectives : The aim of the present study was to assess the effects of Sa-am acupuncture (Damjeonggyeok) on autonomic nervous system in night nurses by heart rate variability. Methods : Five night nurses were divided into two groups. We checked their HRV once after sleeping for night and 5 times after working for night, 4 times after operation. We operate Sa-am acupuncture (Damjeonggyeok) and sham acupuncture twice by turns for group A and in reverse order for group B. We checked responses of HRV change after operations. Statistical analysis was performed by using the SPSS Win. Ver. 13.0 for analysis about correlation between data, and Baysian analysis using WinBUGS(Ver. 1.4) for comparison between Sa-am acupuncture (Damjeonggyeok) and sham acupuncture. Results : The median overall decrease for difference in responses of low-frequency power in normalized units (LF (NU)) was -16.56 (-28.88, -6.446), the median overall increase for difference in responses to high-frequency power in normalized units (HF (NU)) was 16.25 (8.104, 28.6) and for the median overall decrease for difference in responses to the ratio of low- to high-frequency power (LF/HF) was -1.846 (-3.922, -0.069), 95% credibility intervals being shown in brackets. VAS of stress was correlated with LF (NU) and HF (NU), LF/HF (p<0.0l). Conclusion : Sa-am acupuncture (Damjeonggyeok) might have sympatholytic and parasympathomimetic effects.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.430-439
• /
• 2011

In this paper, we design a digital predistortion(DPD) for linearity enhancement of RF power amplifier operating in 900 MHz band. We verify improvement of linearity by comparing the proposed DPD using tanh as a nonlinear indexing function and the DPD using linear indexing function based on signal amplitude. The digital predistortion is realized by look-up table(LUT) method, and the Saleh model is employed for power amplifier modeling, then a commercial power amplifier module is used for measurement. The LUT has 256 tables, and the NLMS(Normalized Least Mean Square) algorithm was utilized for an adaptive algorithm for estimation. As a result, we improve the ACLR(Adjacent Channel Leakage Ratio) by around 15 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.484-490
• /
• 2012

In this paper, we design a digitally pre-distorted RF power amplifier operating in 900 MHz band. The linearity of RF power amplifier is improved by employing the digital pre-distortion(DPD) based on affine projection(AP) algorithm, where the look-up table(LUT) method is used with non-linear indexing. The proposed DPD with AP algorithm is compared with that with normalized least mean square(NLMS) algorithm, applied to the RF power amplifier. A commercial power amplifier module is used for verification of the proposed algorithm which shows improvement of adjacent channel leakage ratio(ACLR) by about 21 dB.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.191-197
• /
• 2012

In this paper we present creating 3D image from 2D image by extract initial depth values calculated from focal values. The initial depth values are created by using the extracted focal information, which is calculated by the comparison of original image and Gaussian filtered image. This initial depth information is allocated to the object segments obtained from normalized cut technique. Then the depth of the objects are corrected to the average of depth values in the objects so that the single object can have the same depth. The generated depth is used to convert to 3D image using DIBR(Depth Image Based Rendering) and the generated 3D image is compared to the images generated by other techniques.

• Korean Journal of Optics and Photonics
• /
• v.26 no.1
• /
• pp.9-16
• /
• 2015

We have developed ellipsometry lidar and measured aerosol and ice-cloud characteristics. To measure a full normalized backscattering phase matrix (NBSPM) composed of nine elements, we have designed an optical system with three kinds of transmission and three kinds of reception, composed of ${\lambda}/2$ waveplate, ${\lambda}/4$ waveplate and empty optic. To find systematic optical errors, we used clean day middle-altitude (4-6km) lidar signals for which the aerosol's concentration was small and its orientation chaotic. After calibrating our lidar system, we have calculated NBSPM elements scattered from an aerosol and from an ice cloud. In the case of an aerosol, we found that the off-diagonal values $m_{12},{\ldots},m_{34}$ of the NBSPM are smaller than those for a cirrus cloud. Also, the off-diagonal values of the NBSPM from a cirrus cloud depend on atmospheric conditions.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.4
• /
• pp.288-298
• /
• 2017

A study of the damage evolution laws for ductile materials was carried out to predict the ductile fracture behavior of a marine structural steel (EH36). We conducted proportional and non-proportional stress tests in the experiments. The existing 3-D fracture strain surface was newly calibrated using two fracture parameters: the average stress triaxiality and average normalized load angle taken from the proportional tests. Linear and non-linear damage evolution models were taken into account in this study. A damage exponent of 3.0 for the non-linear damage model was determined based on a simple optimization technique, for which proportional and non-proportional stress tests were simultaneously used. We verified the validity of the three fracture models: the newly calibrated fracture strain model, linear damage evolution model, and non-linear damage evolution model for the tensile tests of the asymmetric notch specimens. Because the stress evolution pattern for the verification tests remained at mode I in terms of the linear elastic fracture mechanics, the three models did not show significant differences in their fracture initiation predictions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.237-242
• /
• 2016

This paper introduces a method of measuring the displacement of a cable-stayed bridge using digital image processing (DIP). The validity of the DIP technique was confirmed by comparing the results with those obtained using a displacement meter and ANSYS analysis. The normalized cross-correlation (NCC) coefficient was used. 100 kgf and 200 kgf loading experiments were carried out, which showed that when the displacement is large, the reliability of the DIP technique is increased. That is, when the load was increased from 100 kgf to 200kgf, it decreased from 31% to 14% compared to the ANSYS results and from 14% to 4% compared to the displacement meter results. Therefore, the image processing method is able to measure the displacement sufficiently accurately.

• Korean Journal of Remote Sensing
• /
• v.32 no.1
• /
• pp.1-11
• /
• 2016

Since forest is an important part of ecological system, the deforestation is one of global substantive issues. It is generally accepted that the climate change is related to the deforestation. The issue is worse in developing countries because the forest is one of important natural resources. In the case of North Korea, the deforestation is on the rise from forest reclamation for firewood collection and food production. Moreover, a secondary effect from flood intensifies the damage. Also, the political situation in North Korea presents difficulty to have in-situ measurements. It means that the accurate information of North Korea is nearly impossible to obtain. Thus, assessing the current situation of the forest in North Korea by indirect method is required. The objective of this study is to monitor the forest status of North Korea using multitemporal Landsat images, from 1980s to 2010s. Since the deforestation in North Korea is caused by local residents, we selected two study areas of high population density: Pyeongyang and Hyesan. In North Korea, most of clean Landsat images are acquired in fall season. The fall images have an advantage that we can easily distinguish agriculture areas from forest areas, also have an disadvantage that the forests cannot be easily identified because some of trees have turned red. To identify the forests exactly, we proposed a modified Normalized Difference Vegetation Index (mNDVI) value. The deforestation in Pyeongyang and Hyesan was analyzed by using mNDVI. The dimension of forest has decreased approximately 36% in Pyeongyang for 27 years and approximately 25% in Hyesan for 16 years. The results show that the forest areas in Pyeongyang and Hyesan have been steadily reduced.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.2 no.2
• /
• pp.233-239
• /
• 1999

Acrodermatitis enteropethica (AE) is a rare autosomal recessive disorder of zinc absorption leading to chronic diarrhea and characteristic skin lesion. The term is also applied to any acquired zinc deficiency state resulting in the same clinical pictures. We experienced one case of AE in 1 month old male infant who had bacterial enterocolitis. The skin around mouth, anus, eyes, ears, hands and legs became reddish, vesicular and eczematoid. Serum zinc level was decreased to $51.4\;{\mu}g/dL$ (N=70~150). Endoscopic finding revealed pale gastric mucosa and villous atrophy of small intestine. Biopsy finding of small intestine showed no villi due to mucosal atrophy. On 13 day of admission jaundice with DIC were noted and AST & ALT were elevated to 110 & 36.8 IU/L, respectively. Diarrhea was improved but jaundice and liver function were not recovered until discharge from hospital. After discharge when the patient was 4 months of age serum bilirubin and AST/ALT had not been normalized. CMV shell vial culture of urine and CMV Ig G antibody were positive. So intravenous ganciclovir injection of 7.5 mg/kg, two times a day for 2 weeks and then 10 mg/kg/day for 3 months was done from 4 to 6 months of age. No virus was found in the urine and AST & ALT were normalized at 2 months after stopping ganciclovir treatment.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.277-285
• /
• 2018

Azurite ($Cu_3(CO_3)_2(OH)_2$) was compressed up to 21.52 GPa for its behaviors at ambient temperature. High pressure experiment was performed using the symmetrical diamond anvil cell employed in the angle dispersive X-ray diffraction method. Pressure was determined by ruby fluorescence calibration method. No phase transitions were observed within the present pressure limit and bulk modulus was determined to be 54.4 GPa when ${K_0}^{\prime}$ is fixed to be 4. Applying the normalized pressure-strain analysis, reliability of the azurite compression pattern was checked.