• 소성∙가공
• /
• 제11권1호
• /
• pp.69-74
• /
• 2002

In addition to lightweight and moldable characteristics, polymeric foams possess an excellent energy absorbing capability that can be utilize for a wide range of commercial applications, especially in the crashworthiness of the automobiles. The purpose of the present study is to develop experimental methodology to characterize the pressure dependent yield behavior of the energy absorbing polymeric foams. For the compression test in a triaxial stress sate, a specially designed device was placed in a hydraulic press to produce and control oil pressure. For the test material, the polyurethane foams of two different densities were used. The displacement of the specimen, the load subjected to the specimen, and oil pressure applied to the specimen were measured and controlled. Stress strain curves and yield stresses for the four different oil pressure were obtained. It was found from the present experiments that the polyurethane foams exhibited significant increases in yield stress with applied pressure or mean normal stress. Based on this observation, a yield criteria which included the effect of the stress invariant were established for the polymeric foams. The obtained experimental constants which constituted the pressure-dependent yield criterion were verified.

• 한국정보처리학회논문지
• /
• 제3권6호
• /
• pp.1553-1567
• /
• 1996

표면 보간법을 응용하는 분야에는 모델링 자연현상 가시화 등을 비롯하여 여러 가지를 들 수 있다. 사면체 분할법은 사차원적 표면 형성을 위한 전 처리 단계 중의 하나이다. 사차원 공간상에서 피스와이즈(piecewise) 선형보간법의 질은 삼차원에서 의 자료 점의 분포에 영향을 받을 뿐 아니라 자료 값에도 영향을 받는다. 자료 값을 고려한 사면체 분할법이 추정의 질을 개선시킬 있음을 사차원 공간의 가시화를 통하 여 보여준다. 본 논문에서는 Delaunay 사면분할법의 구 기준(Sphere criterion)과 자 료 의존형 사면체 분할법 중의 하나인 최소 제공제곱 근사기준(least squares fitting criterion)을 논의하였다. 본 논문은 또한 새로운 자료 값을 고려한 기준인 gradient difference와 jump in normal direction derivative들을 논의하였다.

• Journal of the Korean Statistical Society
• /
• 제25권1호
• /
• pp.81-94
• /
• 1996

This paper suggests a new criterion for testing the general linear hypothesis about coefficients in multivariate growth curve model. It is developed from a Bayesian point of view using the highest posterior density region methodology. Likelihood ratio test criterion(LRTC) by Khatri(1966) results as an approximate special case. It is shown that under the simple case of vague prior distribution for the multivariate normal parameters a LRTC-like criterion results; but the degrees of freedom are lower, so the suggested test criterion yields more conservative test than is warranted by the classical LRTC, a result analogous to that of Berger and Sellke(1987). Moreover, more general(non-vague) prior distributions will generate a richer class of tests than were previously available.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2000년도 추계학술발표회 논문집
• /
• pp.147-152
• /
• 2000

A Bayesian criterion is proposed for a multiple test of two independent multivariate normal populations. For a Bayesian test the fractional Bayes facto.(FBF) of O'Hagan(1995) is used under the assumption of Jeffreys priors, noninformative improper proirs. In this test the FBF without the need of sampling minimal training samples is much simpler to use than the intrinsic Bayes facotr(IBF) of Berger and Pericchi(1996). Finally, a simulation study is performed to show the behaviors of the FBF.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 추계 학술발표회 논문집
• /
• pp.15-19
• /
• 2003

In this paper, we develop the Jeffreys' prior, reference priors and the probability matching priors for the intraclass correlation coefficient of a symmetric normal distribution. We next verify propriety of posterior distributions under those noninformative priors. We examine whether reference priors satisfy the probability matching criterion.

• Structural Engineering and Mechanics
• /
• 제41권4호
• /
• pp.495-508
• /
• 2012

The strength theory of concrete is significant to structure design and nonlinear finite element analysis of concrete structures because concrete utilized in engineering is usually subject to the action of multi-axial stress. Experimental results have revealed that lightweight aggregate (LWA) concrete exhibits plastic flow plateau under high compressive stress and most of the lightweight aggregates are crushed at this stage. For the purpose of safety, therefore, in the practical application the strength of LWA concrete at the plastic flow plateau stage should be regarded as the ultimate strength under multi-axial compressive stress state. With consideration of the strength criterion, the ultimate strength surface of LWA concrete under multi-axial stress intersects with the hydrostatic stress axis at two different points, which is completely different from that of the normal weight concrete as that the ultimate strength surface is open-ended. As a result, the strength criteria aimed at normal weight concrete do not fit LWA concrete. In the present paper, a multi-axial strength criterion for LWA concrete is proposed based on the Unified Twin-Shear Strength (UTSS) theory developed by Prof Yu (Yu et al. 1992), which takes into account the above strength characteristics of LWA under high compressive stress level. In this strength criterion model, the tensile and compressive meridians as well as the ultimate strength envelopes in deviatoric plane under different hydrostatic stress are established just in terms of a few characteristic stress states, i.e., the uniaxial tensile strength $f_t$, the uniaxial compressive strength $f_c$, and the equibiaxial compressive $f_{bc}$. The developed model was confirmed to agree well with experimental data under different stress ratios of LWA concrete.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.105-118
• /
• 2015

PURPOSES : This study aims to evaluate the road safety of the super-elevation transition section of a left turn curve and suggest the minimum longitudinal grade of a super-elevation transition section to be used before and after a left curved section. METHODS : We evaluated the road condition by means of the safety-criterion-evaluation method involving side friction factors, and then solve the problem by introducing the minimum longitudinal grade criterion based on conditions described in the hydraulics literature. RESULTS : It was calculated that when a road satisfies hydroplaning conditions, the difference between side friction assumed and side friction demanded is less than -0.04. In this case, the safety criterion for the condition is unsatisfied. Conversely, when a road is in a normal state under either wet or dry conditions, it was calculated that the difference between side friction assumed and side friction demanded is more than 0.01. Thus, the safety criterion for this condition is found to be satisfied. After adjusting the minimum longitudinal grade applied to a super-elevation transition section, the hydroplaning condition can be eliminated and the safety criterion can be met for all sections. CONCLUSIONS : It is suggested that a minimum longitudinal grade should be provided on super-elevation transition sections in order to prevent hydroplaning.

• Communications for Statistical Applications and Methods
• /
• 제18권3호
• /
• pp.343-355
• /
• 2011

두 분포함수의 혼합모형을 가정한 자료에서 적절한 분류점을 찾고 평가하는 것은 중요한 문제이다. 분류정확도 측도로 많이 사용하는 아홉 종류의 MVD, Youden지수, (0,1)까지 최단기준, 수정된(0,1)까지 최단 기준, SSS, 대칭점, 정확도면적, TA, TR에 대하여 설명하고, 이 측도들의 관계를 발견하면서 정확도 측도들의 조건을 몇 개의 범주로 군집화한다. 정규혼합분포를 가정하여 군집된 측도들에 기반하는 분류점들을 구하고, 그 분류점에 대응하는 제I종 오류율과 제II종 오류율 그리고 두 종류의 오류율합을 구하여 크기를 비교하고 토론하다. 추정된 혼합분포에 대하여 어떤 분류 정확도 측도의 제I종과 II종 오류율 또는 오류율합이 최소인지를 탐색할 수 있으며 자주 인용하는 정확도 측도의 장점과 단점을 파악할 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.627-630
• /
• 1999

For depth extraction from the focus and recovery the shape, determination of criterion function for focus measure and size of the criterion window are very important. However, Texture, illumination, and magnification have an effect on focus measure. For that reason, depth map has a partial high and low peak. In this paper, we propose a depth extraction method from focused images using the error interpolation. This method is modified the error depth into mean value between two normal depth in order to improve the depth map.

• Journal of the Korean Data and Information Science Society
• /
• 제22권6호
• /
• pp.1241-1250
• /
• 2011

In this paper, we develop noninformative priors for the log-normal distributions when the parameter of interest is the common mean. We developed Jeffreys' prior, th reference priors and the first order matching priors. It turns out that the reference prior and Jeffreys' prior do not satisfy a first order matching criterion, and Jeffreys' pri the reference prior and the first order matching prior are different. Some simulation study is performed and a real example is given.