• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.250-255
• /
• 2003

The position of a 3-dimensional(3D) point can be measured by using calibrated stereo camera. To obtain more accurate measurement ,more accurate camera calibration is required. There are many existing methods to calibrate camera. The simple linear methods are usually not accurate due to nonlinear lens distortion. The nonlinear methods are accurate more than linear method, but it increase computational cost and good initial guess is needed. The multi step methods need to know some camera parameters of used camera. Recent years, these explicit model based camera calibration work with the development of more precise camera models involving correction of lens distortion. But these explicit model based camera calibration have disadvantages. So implicit camera calibration methods have been derived. One of the popular implicit camera calibration method is to use neural network. In this paper, we propose implicit stereo camera calibration method for 3D reconstruction using support vector machine. SVM can learn the relationship between 3D coordinate and image coordinate, and it shows the robust property with the presence of noise and lens distortion, results of simulation are shown in section 4.

• 한국통신학회논문지
• /
• 제1권1호
• /
• pp.23-31
• /
• 1976

VHF 및 UHF 챠넬의 TV 信號는 映像 및 音聲을 포함한 6MHz의 대역폭으로 챠넬變換 된후 直線增幅器를 통해 재 送信될 때 搬送波付近의 兩側波帶傳送領域에서 出力振幅周波數特性에 不自然스러운 變化가 생겨 화질에 影響을 주는수가 있다. 이러한 現像은 發振器로 부터의 不要信號로 因한 不要下側帶波의 發生등 問題가 되는 要因인 트랜지스터 直線增幅器의 非直線性, MIXER 회로에서의 상호변조 歪 AM-PM 變換 및 envelope delay 特性 등을 고려하여 出力特性을 구한 결과 主原因은 非直線性에 의한 것이였으며 實驗結果로서는 非直線性의 主因으로 Bias 조건의 불합리 및 發振器로 부터의 不要周波數의 發生이 가장 큰 原因으로 나타났다. 특히 인접信號에 對한 相互變調歪 및 不要信號發生은 Up conversion의 경우가 Down Conversion의 경우보다 현저히 감소됨을 확인하였고 發振器로부터의 spurious가 system에 영향을 주지 않는 方案을 모색하였다.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.220-224
• /
• 2005

The thermal elasto-plastic analysis for the prediction of welding distortion of a 3 dimensional large-scaled ship structure is a very time-consuming work since the analysis is a nonlinear problem, and a lot of finite elements are needed to simulate the large ship hull block. Generally, 3-D finite elements have been used in the 3-D welding distortion problem to assess precisely the temperature gradient through the thickness direction of the welding plate. As a result of the adoption of 3-D element, degrees of freedom are rapidly increased in the problem to be solved. In this study, to improve the time efficiency of welding thermal elasto-plastic analysis, a layered shell element was proposed to simulate 3-D temperature gradient, and the results were compared with the experiment. The experiments were carried out for the type of bead-on-plate welding, and we found the measured data have a good agreement with the FEA results.

• Journal of electromagnetic engineering and science
• /
• 제14권2호
• /
• pp.68-73
• /
• 2014

A linear stacked field-effect transistor (FET) power amplifier (PA) is implemented using a $0.18-{\mu}m$ silicon-on-insulator CMOS process for W-CDMA handset applications. Phase distortion by the nonlinear gate-source capacitance ($C_{gs}$) of the common-source transistor, which is one of the major nonlinear sources for intermodulation distortion, is compensated by employing a PMOS linearizer with improved AM-PM. The linearizer is used at the gate of the driver-stage instead of main-stage transistor, thereby avoiding excessive capacitance loading while compensating the AM-PM distortions of both stages. The fabricated 836.5 MHz linear PA module shows an adjacent channel leakage ratio better than -40 dBc up to the rated linear output power of 27.1 dBm, and power-added efficiency of 45.6% at 27.1 dBm without digital pre-distortion.

• 한국통신학회논문지
• /
• 제35권4C호
• /
• pp.408-414
• /
• 2010

CCTV이미지에서 교통정보를 수집하려고 할 때 관측자가 카메라를 움직이면 설치된 검지영역이 손실되고 복원하려고 해도 기계적 오차로인해 어려움을 겪게 된다. 그래서 어안이나 거울을 이용하면 카메라를 움직이지 않아도 된다. 하지만 이러한 상황하에서 가장 큰 문제점은 영상의 왜곡이다. 본 논문에서는 이러한 왜곡을 극복하기 위해 비선형 확산 방정식을 이용한 분할과 이 영역에디포메이션을 적용하여 디블러링 한 후 차량정보 수집을 시도한 결과 이전 결과보다 5% 향상된 결과를 얻었다.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.473-479
• /
• 2008

With the advent of mobile phone, digital multimedia broadcasting(DMB) service is to be realized for multimedia data communication. For an acoustic part, a smaller and lighter microspeaker is also soon to be realized as an MP3 song player and a speakerphone. Sound quality in the microspeaker is becoming more important in mobile phones. It is evaluated by total harmonic distortion(THD). THD is the proportion of higher order frequencies output response to sinusoidal input signal. It is affected by uneven magnetic distribution and nonlinear response of diaphragm. In this paper, harmonic distortion is analyzed by considering magnetic and mechanical coupling effects. Simulated results of THD are compared with experimental data. Results show that THD in lower frequency range is higher due to high displace on voice coil and high mechanical response of high order frequency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.236-241
• /
• 2008

With the advent of mobile phone, Digital multimedia broadcasting (DMB) service is to be realized for multimedia data communication. For an acoustic part, a smaller and lighter microspeaker is also soon to be realized as an MP3 song player and a speakerphone. Sound quality in the microspeaker is becoming more important in mobile phones. It is evaluated by total harmonic distortion (THD). THD is the proportion of higher order frequencies output response to sinusoidal input signal. It is affected by uneven magnetic distribution and nonlinear response of diaphragm. In this paper, harmonic distortion is analyzed by considering magnetic and mechanical coupling effects. Simulated results of THD are compared with experimental data. Results show that THD in lower frequency range is higher due to high displace on voice coil and high mechanical response of high order frequency.

• 대한토목학회논문집
• /
• 제14권1호
• /
• pp.83-91
• /
• 1994

뒤틀림을 받는 손상 관형 단면의 강도 및 거동을 파악하기 위한 효율적인 해석기법을 제시하였다. 단면의 뒤틀림을 고려키 위하여 유한요소 해석법을 이용하였으며 부재의 유한요소 해석시 발생하는 국부 불안정에 의한 하중-변형 응답의 발산 문제를 해결하기 위하여 손상부위만에 대하여 유한요소해석을 수행, 모멘트-곡률 관계를 일반화하여 이를 부재해석의 입력자료로 제공하였다. 광범위한 실용판형 부재를 포함하는 데이타베이스를 구축하여 이에 대한 복회귀분석을 수행, 일반화된 모멘트-곡률관계식을 제시하여 연구의 실용성을 제고 하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.98-101
• /
• 1998

The intermodulation distortion(IMD) due to laser diode nonlinearity of an asynhcronous direct sequence code diviion multiple access(DS/CDMA) system in wireless-optical transmission system model is analzed. A third order polynomial is used to represent laser diode nonlinearity. In DS/CDMA system, only one harmonic of the third-order intermodulation term falls on the signal frequency band and influences the system performance characteristics. To cancel multi-user interference and nonlinear distortion in a DS/CDMA wireless-optical transmission system model, the simple transversal filter structure with N-taps of (N-1) tap delay of 1 chip time delay line is used. It is necessary to select an optimal modulation index that provides a maximum signal-to-noise ratio and the results are useful for CDMA system design.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.115-121
• /
• 2015

Stand-alone inverter supplies constant voltage to loads. However, when a three-phase stand-alone inverter supplies unbalanced load, the generated output voltages also become unbalanced. The nonlinear characteristics of inverter dead time cause a more serious distortion in the output voltage. With unbalanced load, voltage distortion caused by dead time differs from voltage distortion under balanced load. Phase voltages in the stationary reference frame include unbalanced odd harmonics and then, d-q axis voltages in the synchronous reference frame have even harmonics with different magnitude, which are mitigated by the proposed multiple resonant controller. This study analyzes the voltage distortion caused by unbalanced load and dead time, and proposes a novel dead time compensation method. The proposed control method is tested on a 10-kW stand-alone inverter system, and shows that total harmonic distortion (THD) is reduced to 1.5% from 4.3%.