• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.270-281
• /
• 2017

본 논문에서는 헬리콥터 블레이드에서 발생하는 자이로스코픽 세차 진동에 대해 연구하고, 능동 제어기 설계를 통하여 진동 저감 시뮬레이션을 수행한다. 이를 위해, 헬리콥터의 전진 비행시 동역학적 응답을 외팔보 조건을 갖는 회전익의 해석이 가능한 EDISON의 기하학적 정밀 보 구조동역학 프로그램을 이용하여 구조 해석을 진행하고 이를 단순 공기력 모델과 연성하여 공탄성 해석을 수행하였다. 실시간 구조 응답을 구하기 위해 EDISON 프로그램 해석 결과를 비선형 수식으로 모델링하는 기법과 트림해석에는 Newton-Raphson 기법 등이 사용되었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권3호
• /
• pp.256-263
• /
• 2013

The saturation of the actuator impairs the response performance of the near space interceptor control system. A control system based on the properties of linear tracking system is designed for this problem. The properties are that the maximum value of the pseudo-Lyapunov function of the linear tracking control system do not present at the initial state but at the steady state, based on which the bounded stability problem is converted into linear tracking problem. The pseudo-Lyapunov function of the linear tracking system contain the input variables; the amplitude and frequency of the input variables affect the stability of the nonlinear control system. Designate expected closed-loop poles area for different input commands and obtain a controller which is function of input variables. The coupling between variables and linear matrices make the control system design problem non-convex. The non-convex problem is converted into a convex LMI according to the Shur complement lemma and iterative algorithm. Finally the simulation shows that the designed optimal control system is quick and accurate; the rationality of the presented design techniques is validated.

• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.931-947
• /
• 2016

The effects of nanotechnology and smartness on the buckling reduction of pipes are the main contributions of present work. For this ends, the pipe is simulated with classical piezoelectric polymeric cylindrical shell reinforced by armchair double walled boron nitride nanotubes (DWBNNTs), The structure is subjected to combined electro-thermo-mechanical loads. The surrounding elastic foundation is modeled with a novel model namely as orthotropic nonhomogeneous Pasternak medium. Using representative volume element (RVE) based on micromechanical modeling, mechanical, electrical and thermal characteristics of the equivalent composite are determined. Employing nonlinear strains-displacements and stress-strain relations as well as the charge equation for coupling of electrical and mechanical fields, the governing equations are derived based on Hamilton's principal. Based on differential quadrature method (DQM), the buckling load of pipe is calculated. The influences of electrical and thermal loads, geometrical parameters of shell, elastic foundation, orientation angle and volume percent of DWBNNTs in polymer are investigated on the buckling of pipe. Results showed that the generated ${\Phi}$ improved sensor and actuator applications in several process industries, because it increases the stability of structure. Furthermore, using nanotechnology in reinforcing the pipe, the buckling load of structure increases.

• Macromolecular Research
• /
• 제11권4호
• /
• pp.250-255
• /
• 2003

We prepared the photorefractive sol-gel glass based on organic-inorganic hybrid materials containing a charge transporting molecule, second-order nonlinear optical (NLO) chromophore, photosensitizer, and plasticizer. Carbazole and 2-{ 4-[(2-hydroxy-ethyl)-methyl-amino]-benzylidene}-malononitrile were reacted with isocyanato-triethoxy silane and the functionalized silanes were employed to fabricate the efficient photorefractive media induding 2,4,7-trinitrot1uorenone (TNF) to form a charge transfer complex. The prepared sol-gel glass samples showed a large net gain coefficient and high diffraction efficiency at a certain composition. As the concentration of photosensitizer increased, the photorefractive properties were enhanced due to an increment of charge carrier density. Dynamic behavior of the diffraction efficiency was also investigated with the concentration of the photosensitizer.

• 대한조선학회논문집
• /
• 제30권1호
• /
• pp.145-156
• /
• 1993

대변형, 대회전, 대변형도 문제를 고려한 탄소성-손상 유한요소 정식화 과정을 연구함으로써 구조물의 모든 비선형 거동 및 손상을 합리적으로 예측할 수 있는 수치모형을 개발하였다. 재료의 소성 변형과정에서 발생되는 손상을 합리적으로 고려하기 위하여 연속체 손상역학의 접근방법을 이용하여 구성방정식을 정식화하였으며 Updated Lagrangian 정식화방법, 호장증분법 등의 비선형 강성방정식 해법을 적용하여 2차원 평면문제를 대상으로 하는 탄소성-손상 유한요소해석 프로그램을 구성하였다. 여러가지 예제 계산을 통하여 이 수치모형의 적용성 및 타당성을 검토한 결과 대변형 문제, 손상을 포함하는 재료 비선형문제 공히 합리적인 해석결과를 제시하고 있슴을 확인할 수 있었다.

• 한국광학회지
• /
• 제16권6호
• /
• pp.485-489
• /
• 2005

본 논문에서는 광섬유 내에서 유도 브릴루앙 산란을 억제하는 방법에 대하여 연구하였다. 광섬유 내에 샘플링 브라그 격자를 사용함에 의하여 강한 Q-스위치 펄스를 전송할 수 있도록 하였다. 격자는 유도 블릴루앙 산란으로 생성되는 스토크 펄스의 스펙트럼이 모두 브라그 격자의 반사 대역에 오도록 설계된다. 1 m 내에 샘플링 광섬유 브라그 격자의 수가 결합계수 보다 유도 브릴루앙 산란의 억제에 직접적인 영향을 미친다는 것을 보였다. 이것은 후방 스토크 파의 발생을 억제하며 유도 브릴루앙 산란의 악 영향을 감소시킨다. 본 연구 방법을 통하여 1 kW 최대 파우어를 갖는 15 ns 펄스가 작은 에너지 손실을 발생시키며 전송될 수 있다는 것을 시뮬레이션을 통해 보였다.

• 한국광학회지
• /
• 제16권6호
• /
• pp.490-493
• /
• 2005

본 논문은 광자 결정 광섬유에서 100 fs의 펄스 폭을 갖는 펌프 광원의 파장과 입력파워에 따른 초 광대역 광원 생성에 대해 실험적으로 연구하였다. 적절한 파라미터들을 조절함으로써 광 스펙트럼 진폭의 균일함이 10 dB 이내에서 약 750 nm의 스펙트럼 폭을 갖는 초 광대역 광원을 얻어냈다. 사용한 광자 결정 광섬유의 길이는 2 m였고, 펌프광원으로는 모드 록킹된 Ti:Sapphire laser를 사용하였다. 또한, 펌프 광원의 여러 가지 변수들을 바꿔줌으로써 초 광대역 광원의 다양한 스펙트럼 현상을 조절할 수 있었다.

• 천문학회보
• /
• 제41권1호
• /
• pp.47.2-47.2
• /
• 2016

The protons and helium ions in the solar wind are observed to possess anisotropic temperature profiles. The anisotropy appears to be limited by various marginal instability conditions. One of the efficient methods to investigate the global dynamics and distribution of various temperature anisotropies in the large-scale solar wind models may be that based upon the macroscopic quasi-linear approach. The present paper investigates the proton and helium ion anisotropy instabilities on the basis of comparison between the quasi-linear theory versus particle-in-cell simulation. It is found that the overall dynamical development of the particle temperatures is quite accurately reproduced by the macroscopic quasi-linear scheme. The wave energy development in time, however, shows somewhat less restrictive comparisons, indicating that while the quasi-linear method is acceptable for the particle dynamics, the wave analysis probably requires higher-order physics, such as wave-wave coupling or nonlinear wave-particle interaction. We carried out comparative studies of proton firehose instability, aperiodic ordinary mode instability, and helium ion anisotropy instability. It was found that the agreement between QL theory and PIC simulation is rather good. It means that the quasilinear approximation enjoys only a limited range of validity, especially for the wave dynamics and for the relatively high-beta regime.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.232-238
• /
• 2009

Flicker, also known as voltage fluctuation, is a newest problem of power quality issues, because it is caused by nonlinear loads such as electrical arc furnace and large-scale induction motor, which are country-widely used as the heavy industries of a country develop. An international standard, International Electrotechnical Commission (IEC) 61000-4-15, was published in 1997 and revised in 2003. With increasing concerns about flicker, its mitigation methods have been also studied. General countermeasures for flicker are divided into three categories: a) enhancing the capacity of supplying system, b) Series elements including series reactor and series capacitor and c) power electronic devices including static VAR compensator (SVC) and static synchronous compensator (STATCOM). This paper introduces how to mitigate the voltage flicker at the point of common coupling (PCC) and presents how to simulate and compare the flicker alleviating effects by each mitigation method, using IEC flickermeter based on the Matlab/Simulink program.

• Structural Engineering and Mechanics
• /
• 제61권1호
• /
• pp.15-29
• /
• 2017

The recently introduced index Ratio Of Torsion (ROT) quantifies the base shear amplification due to torsional effects on shear cantilever types of building structures. In this work, a theoretical proof based on the theory of elasticity is provided, depicting that the ratio of torsion (ROT) is independent of the forces acting on the structure, although its definition stems from the shear forces. This is a particular attribute of other design and evaluation criteria against torsion such as center of rigidity and center of strength. In the case of ROT, this evidence could be considered as inconsistent, as ROT is a function solely of the forces acting on structural members, nevertheless it is proven to be independent of them. As ROT is the amplification of the shear forces due to in-plan irregularities, this work depicts that this increase of internal shear forces rely only on the structural topology. Moreover, a numerical verification of this theoretical finding was accomplished, using linear statistics interpretation and nonlinear neural networks simulation for an adequate database of structures.