• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.623-629
• /
• 2010

In this paper, a new robust variable structure controller based on a nonlinear integral type sliding surface is presented for the control of uncertain systems with mismatched uncertainties and disturbance. A nonlinear integral type sliding surface is suggested for removing the reaching phase. After its ideal sliding dynamics is obtained, the two design methods are presented. A corresponding control input is proposed to satisfy the closed loop stability in the sense of Lyapunov and the existence condition of the sliding mode on the nonlinear integral type sliding surface, which will be investigated in Theorem 1. Through a design example and simulation study, the usefulness of the proposed controller is verified.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.526-529
• /
• 1998

In this paper, we proposed a nonlinear sliding mode controller to regulate the swinging angle of Overhead Crane System. Roughly speaking, the controller is designed to regulate an output(the swing angle) while providing internal stability. It is difficult to apply many of standard nonlinear control design techniques. In contrast to control that use a command generator and possibly a time-varying feedback, our control law is simple autonomous nonlinear controller. We analyze the stability of the closed-loop system using an $L_2$ Sliding surface conditions approach on a nonlinear feedback linearization of the system about the desired periodic orbit. One can easily extend this approach to analyze the robustness of the control system with respect to disturbances and parameter variations.

• Journal of Drive and Control
• /
• v.18 no.4
• /
• pp.59-64
• /
• 2021

In this paper, a mathematical pressure dynamics model for a variable thrust solid propulsion system with an electric actuator was derived from the mass conservation of gas. To solve the problem induced by modeling uncertainties in the propellant model and the dead zone of the actuator, a nonlinear pressure controller combined with a nonlinear disturbance observer was designed using a mathematical model of the system. The simulation results showed that the proposed pressure controller could reduce tracking errors compared to another conventional nonlinear controller even in situations where input disturbances were present.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2839-2842
• /
• 1999

This paper describes the design of fuzzy PID controller using simplified indirect inference method. First, the fuzzy PID controller is derived from the conventional continuous time linear PID controller. Then the fuzzification, control-rule base, and defuzzification using SIIM in the design of the fuzzy controller are discussed in detail. The resulting controller is a discrete time fuzzy version of the conventional PID controller, which has the same linear structure. but are nonlinear functions of the input signals. The proposed controller enhances the self-tuning control capability, particularly when the process to be controlled is nonlinear. When the SIIM is applied, the fuzzy inference results can be calculated with splitting fuzzy variables into each action component and are determined as the functional form of corresponding variables. So the proposed method has the capability of the high speed inference and adapting with increasing the number of the fuzzy input variables easily. Computer simulation results have demonstrated the superior to the control performance of the one proposed by D. Misir et al.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.11-15
• /
• 1999

In this paper, a robust pole placement controller for time invariant linear systems with polytopic uncertainties is presented. The proposed controller is a fixed order output feedback controller which stabilizes the uncertain systems and satisfies the constraints on the closed-loop pole location. The proposed controller can be obtained by minimizing a certain nonlinear object function subject to linear matrix inequality constraints. An algorithm for solving the nonlinear optimization problem is also proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1415-1421
• /
• 2004

In this study, a position synchronous control algorithm applied to two-axes pneumatic cylinder driving apparatus is proposed. The position synchronous control algorithm is composed of position controller and synchronous controller. The position controller is designed to minimize the effect of several nonlinear characteristics peculiar to the pneumatic cylinder driving apparatus on position control performance. The synchronous controller is designed to reduce the synchronous error. The effectiveness of the proposed control algorithm is proved by experimental results.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.47-49
• /
• 2005

This paper presents a robust speed control method of induction motors(IM) using a Non-linear PI controller(NPI), NPI is high gain controller in region of small error, and low gain controller in region of large error. so in steady state, system will be robust against variation of load torque. The simulation and experiment results confirm the validity of proposed control scheme.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.213-218
• /
• 2007

We consider a web transport system. The objective of this paper is to design the output feedback controller such that the controller can track a desired tension and processing speed on web transport system. We propose the new design method using observer and feedback linearization technique. The proposed method use a nonlinear feedback to transform to linear system and high gain observer to estimate the state value. We show that the proposed controller can achieve the control object using only output. We show a performance of controller via the simulation.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.227-231
• /
• 2006

This paper presents a robust speed control method of induction motors(IM) using a Non-linear PI controller(NPI). NPI is high gain controller in region of small error, and low gain controller in region of large error. So in steady state, system will be robust against variation of load torque. The simulation and experiment results confirm the validity of proposed control scheme.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.3
• /
• pp.292-299
• /
• 1992

A nonlinear feedback linearizing control method for an EMS (Electro-Magnetic Suspension) system is proposed. After linearzing the system using the exact linearizing method, conventional linear system control theory has been applied. Robustness properties of the proposed controller with respect to the load variations is also analysed for a single magnet suspension system. Computer simulation is carried out in order to compare the performance of the proposed controller with that of the existing controller designed by using Taylor series expansion around nominal points.