• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.61-62
• /
• 2021

Exterior wall molding, which is widely applied as a design element of the exterior wall of domestic apartment, should be applied as a nonflammable or semi-nonflammable material grade according to the rules on standards for evacuation/fire protection structures of buildings. For this reason, stone and AL sheet are mainly used, but stone is expensive and design autonomy is low. Inorganic reinforced CLC nonflammable molding was applied to the exterior wall of the building through tests of nonflammable performance, noise reduction, and installation stability.

• 청정기술
• /
• 제6권2호
• /
• pp.101-106
• /
• 2000

비휘발성이고 불연성의 새로운 납땜 플럭스를 개발하였다. 이 플럭스는 기존의 플럭스에서 사용하는 VOC 물질인 이소프로판올/메타놀과 같은 용제를 사용하지 않고 VOC 규제물질이 아닌 디클로로프로판 용제를 사용하여 제조하였다. 이 플럭스는 기존의 이소프로판올/메타놀 용제로 제조한 플럭스에 비하여 전기절연성, 작업성, 신뢰성면에서 우수하였고 작업장의 환경 안정성 면에서 우수하며 경제적임을 확인할 수 있었다.

• 설비공학논문집
• /
• 제5권3호
• /
• pp.217-225
• /
• 1993

Nonflammable mixtures of flammable and nonflammable refrigerants are possible as substitute refrigerants for use in domestic heat pumps and refrigerators. Refrigerant leakage from such a system is of paramount concern since it is possible that the resulting mixture composition remaining in system will reside in the flammable range. This paper presents a simulation of a leakage process of refrigerant mixtures. Idealized cases of isothermal leakage process are considered in this study representing a slow leak. Simulation is performed for selected composition of binary and ternary refrigerant mixture; R-32/134a and R-32/125/134a. Mixture compositions with respect to percentage leak of original charge are presented. In isothermal leakage process, both vapor and liquid compositions of more volatile refrigerant decrease during vapor and liquid leak, but the total composition of this component decreases during vapor leak and increases during liquid leak. Vapor and liquid compositions are determined depending on the vapor-liquid equilibrium relation of the refrigerant mixture. The refrigerant mixture left in the system can go to a nonflammable direction relying on which component in the mixture is flammable.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.48-53
• /
• 2003

원자력발전소로부터 발생하는 비가연성 고체폐기물의 모사시료에 대해 플라즈마 토치를 이용하여 고온용융처리 시험을 실시하였다 실험은 AP-200L 공동형 플라즈마토치를 사용하여 콘크리트, 흙과 금속이 포함되는 혼합물에 대하여 약 50시간 정도 수행되었다. 처리속도, 토치의 노즐과 용융물 표면과 간격, 토치 회전속도, 토치가스 유속 그리고 용융로의 압력 등 몇몇 실험조건을 사전에 결정하였으며, 냉각수 온도, 배가스 온도, 토치출력변화 등 기본 파라메타를 측정하였다. 유리화된 시료는 SEM/EDS로 분석하였다.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.63-67
• /
• 2016

Mineral hydrate is a new insulation material that compensates for the defects of existing materials. Mineral hydrate is made of inorganic ingredients; therefore, it is nonflammable. The porous structure of mineral hydrate makes the material lightweight and insulating. Mineral hydrate insulation and similar products have been studied and manufactured in Korea and abroad. However, these insulation materials need to improve in terms of strength. In this study, basalt fiber was used to enhance the strength. In order to observe the property changes, compressive strength, heat conductivity, and specific gravity were measured and XRD pattern analysis was performed. These tests confirmed that basalt fiber was effective at improving the strength and lowering the heat conductivity of mineral hydrate insulation.

• 센서학회지
• /
• 제22권3호
• /
• pp.175-180
• /
• 2013

This paper describes the characteristics of cubic silicon carbide (3C-SiC) films grown on a carbonized Si(100) substrate, using hexamethyldisilane (HMDS, $Si_2(CH_3)_6$) as a safe organosilane single precursor in a nonflammable $H_2$/Ar ($H_2$ in Ar) mixture carrier gas by atmospheric pressure chemical vapor deposition (APCVD) at $1280^{\circ}C$. The growth process was performed under various conditions to determine the optimized growth and carbonization condition. Under the optimized condition, grown film has a single crystalline 3C-SiC with well crystallinity, small voids, low residual stress, low carrier concentration, and low RMS. Therefore, the 3C-SiC film on the carbonized Si (100) substrate is suitable to power device and MEMS fields.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.184-186
• /
• 2009

In past, transformer connection study was concentrated on efficiency improvement and life time broadening. But environmental side began to become important recently. In existing, quick transaction of mineral oil used to insulation oil of transformer is possibility to be difficult and causes environmental pollution in case of was outpoured and there is worry of fire occurrence. Accordingly, nonflammable performance becomes many interest in excellent vegetable oil because ignition point is high than mineral oil and environment friendly material. But, vegetable oil is cooling of transformer and insulation problem of insulating paper for cause of insulation oil special quality. Therefore, in this paper, special quality of vegetable oil that there are being a lot of mineral oil and the latest interest examined about problem and consideration item to be solved to analyzed comparison and applies vegetable oil to transformer for electric power.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.6-6
• /
• 2010

This paper describes that single crystal cubic silicon (3C-SiC) films have been deposited on carbonized Si(100) substrate using hexamethyldisilane(HMDS, $Si_2(CH_3)_6$) as a safe organosilane single-source precursor and a nonflammable mixture of Ar and $H_2$ gas as the carrier gas by APCVD at $1280^{\circ}C$. The 3C-SiC film had a very good crystal quality without defects due to viods, a very low residual stress.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.222-223
• /
• 2018

Recent government policies are increasing interest in zero-energy housing, a building that minimizes energy consumption (90% reduction). As the importance of building passive performance is emphasized, the role of insulation is increasing as a way to reduce indoor heat loss in order to minimize the use of cooling and heating energy. There are two main types of insulation. Organic insulation is widely used for various construction structures such as construction and industrial due to some merits such as the convenience of construction and construction cost. However, it has been pointed out as a main cause every time a fire accident occurs, Jecheon Sports Center', the fire damage of buildings caused by the use of organic insulation materials is expanding to social problems, so it is urgent to research on nonflammable inorganic insulation materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.134-135
• /
• 2007

Growth of cubic SiC has been carried out on oxided Si substrate using atmospheric pressure chemical vapor deposition (APCVD). Hexamethyldisilane (HMDS) was used as the single precursor and nonflammable mixture of Ar and $H_2$ was used as carrier gas. Epitaxial growth had performed depositions under the various $H_2$ conditions which were adjusted from 0 to 100 seem. The effects of $H_2$ was characterized by surface roughness, thickness uniformity, films quality and elastic modulus. Thickness uniformity and films quality were performed by SEM. Surface roughness and elastic modulus were investigated by AFM and Nano-indentor, respectively. According to the $H_2$ flow rate, Poly 3C-SiC thin film quality was improved not only physical but also mechanical properties.