• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.5-10
• /
• 2004

Body movement is one of the important factors in sleep analysis. In this study, a thermopile detector with four channels was implemented as a non-contacting detector of body movement in sleep. Using a thermopile mathematical model and several frames of thermal images, the possibility of detecting body movement was evaluated. Instant body movement signals were evaluated for the upper, lower, and entire body using the Haar wavelet. This decomposition shows the points in time when the upper-body or lower-body movement occurred and the level of body movement. Additionally, partial body movement was decomposed in head-only, whole body, and leg-only movement using the ANFIS algorithm. Finally, three subject's data were evaluated for 60 minutes, and the detection rates of instant and partial body movement, on average, were 96.3％ and 89.2％, respectively.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.2
• /
• pp.165-179
• /
• 2002

Purpose: This descriptive study was done to evaluate the attitude and practice of hand-washing by student nurses. Method: The subjects of the study were 463 senior and junior undergraduate student nurses and RN-BSN students. The questionnaire was developed by the researchers Data were collected from Oct. 16 to Dec. 20. 2001. and analysed by SPSS/WIN. General characteristics. attitude and practice were analyzed by frequency and percentage and differences in attitude and practice according to grade and practice setting were analyzed with $x^2$ test, t-test or ANOVA. Result: 1) The mean frequency of hand-washing was 6.63. Senior students washed more frequently than junior students. 2) The reasons for non-compliance were 'not being accustomed', 'forgetting', and 'not accessible'. 3) The mean time for hand-washing was 23.79 sec., less than the stated appropriate time of 42 18 sec. 4) 90% of the students washed their hands 'after contacting excretions and contaminated items' and few washed 'before giving care to the client'. 5) Most students washed hands rotationally rubbing with soap and water. 6) While washing, they removed their rings more often than their watches. 7) Soap bar (52.8%) and paper towel (69.6%) were most frequently used as decontaminating agent and drying method, but detergent solution (74.2%) and paper towels (60%) were considered as the most appropriate agent and method. 8) Hand-washing was perceived important generally 'to protect from cross-infection'. 'to protect one-self' and 'the most cost effective'. 9) All students responded nurses should practice 'hand-washing.'

• Korean Journal of Health Education and Promotion
• /
• v.26 no.2
• /
• pp.1-13
• /
• 2009

Objectives: This study identified how personal characteristics, family environment, governmental policy for the prevention and cessation of smoking might influence on adolescent smoking. Methods: This study used data from the 2006 Korea Youth Risk Behavior Web-based Survey of 71,404 middle school and high school students, giving a response rate of 90.9%. We selected 61,508 adolescents subjects of the final analysis without missing data on independent variables and dependent variables which are used in this study. This study used $\chi^2$ tests and logistic regression models. Variables were added to the regression model in three groups using a hierarchical approach.Results: Adolescents were significantly more likely to become current smokers if they were boys, were in a higher grade, and had lower academic achievement. Adolescents experiencing stress and depression were associated with increased risk of current smoking. Adolescents with single parents or students of non-living with parents comparing with students of living with parents showed the high possibility of smoking. Lower father's education was associated with increased likelihood of current smoking. Adolescents who were exposed to smoking at home were more likely to smoke. Adolescents without contacting with the antismoking media campaign was associated with increased likelihood of current smoking. Conclusion: Promoting antismoking media campaigns targeted at adolescent is required, and the smoking prevention education which are proper for subjects are required. Proper plans which could decrease the exposure of secondhand smoking should be established.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.55-66
• /
• 2015

In the perspective of industrial health management, it is important for the employee to decrease their job stress, to improve their productivity and quality of labor. In this study, the job stress, and it's influence on PWI(Psychosocial Wellbeing Index) were investigated by the questionnaire survey of 138 industrial workers who had studied assistive technology in college. The contents of questionnaire consist of the demographic characteristics, job-related characteristics, job stress and psycho-social stress. We evaluated job stress by KOSS-SF(Korean Occupational Stress Scale-Sort Form) and psychosocial stress by PWI-SF(Psychosocial Well-being Index-Short Form). To analyze the results, we evaluated the exposure level of KOSS and PWI by demographic characteristics and job-related characteristics using significance tests. Also, we estimated the relationship among demographic characteristics, job-related characteristics, job stress and psychosocial stress, using correlation analysis. As a results, all workers were found to be in a group under the high risky stress. It showed that the scale index of female's job non-autonomy and pwi were much larger than those of male's. Therefore, to guarantee job autonomy of female workers should be more emphasized, to improve their working environment. Job type had significant relationships with many job stress category; physical environment, job demand, job instability and organization culture. Regarding pwi, the scale index of the workers who is in charge of the civil service such as contacting the disabled and the aged in person, were much larger than that of the other workers. Accordingly, the job stress management program including physical environment, job demand, job instability and organization culture, should be suggested, to decrease the stress of the workers in charge of the disabled and the elders service. The strongest predictors of pwi was organization system through maximum positive relations between organization system and pwi. Therefore, it indicates that improvement of organization system such as a fair merit rating, a manpower supply, demand plan and department cooperation is urgently needed to reduce pwi.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.84-94
• /
• 1996

In order to prevent shell sticking by providing sufficient lubrication between the strand and the mold, the mold oscillation has been used. Now it is well known that the shape of the oscillation curve has a decisive effect on the surface quality of the cast product. Besides, oscillation parameters such as stroke and frequency are also very important. In order to guarantee that parameters which have been found to be optimal for a certain grade of steel do not change with time, periodical checks of the physical condition of the whole equipment are necessary. The portable mold oscillation analyzer with integrated computer, developed by POSCO, records the movement of the mold in every spatial direction. The system uses the gap sensors to measure the mold movement (displacement ) in the two horizontal directions according to the mold narrow and broad faces and the vertical strokes in the four corners of mold. The gap sensor is a non-contacting minute displacement measuring device using the principle of high frequency eddy current loss. The mold oscillation diagnosis system integrates the gap sensors, their converters and the industrial portable computer with plug-in data acquisition boards. The all programs, such as the fast Fourier transformation module (amplitude and phase spectrums) and harmonic analysis module, was coded by LabVIEW$^{TM}$ software as the graphical language. In an own 'expert module' which is included in the diagnosis program, one can obtain much information about the mold oscillation equipment.

• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.248-254
• /
• 2023

This study aims to measure the skin rigidity of different facial areas among Koreans and propose guidelines for each area's skin rigidity that can be applied with a facial robot for testing respiratory protective devices. The facial skin rigidity of 40 participants, which included 20 men and 20 women, aged 20 to 50, was analyzed. The rigidity measurement was conducted in 13 facial areas, including six areas in contact with the mask and seven non-contact areas, by referring to the facial measurement guidelines of Size Korea. The facial rigidity was measured using the Durometer RX-1600-OO while in a supine position. The measurement procedure involved contacting the durometer vertically with the reference point, repeating the measurement of the same area five times, and using the average of three values whose variability was between 0.4 and 4.2 Shore OO. The rigidity data analysis used precision analysis, descriptive statistics analysis, and mixed-effect ANOVA. The analysis confirmed the rigidity of the 13 measurement areas, with the highest rigidity of the face being at the nose and forehead points, with values of 51.2 and 50.8, respectively, and the lowest rigidity being at the chin and center of the cheek points, with values of 19.2 and 20.7, respectively. Significant differences between gender groups were observed in four areas: the tip of the nose, the point below the chin, the area below the lower jaw, and the inner concha.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.545-553
• /
• 2009

This paper describes the result of study on measurement of displacement of structure by means of non-contacting method, close-range digital photogrammetry using digital camera. To apply close-range digital photogrammetry to displacement measurement of structure, correction of lens distortion that interferes geometrical analysis has been carried out and then measuring displacement was performed on load regulated-rahmen. For enhanced applicability of displacement measurement, MIDAS which is a structural analysis program was used for modeling and the result was taken from comparative analysis. As a result of the study, it is showed that close-range digital photogrammetry could supplement several weaknesses of LVDT and cable displacement meter and, especially, economy in the perspective of measuring time could be realized. Close-range digital photogrammetry using digital camera can be applied to the area where requires visual analysis such as 3D modeling of structure, profile replication of measurement of structure as well as measurement of displacement of structure.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.102-106
• /
• 2012

The purpose of this paper is to study the failure cases in relation to system of Air Bag in vehicle happened in the field. In the first example, it was separated the soldering parts connected the wire pin between air bag module and clock spring of air bag. Whenever the pin shake by the car's vibration, the driver verified the malfunction phenomenon appeared air bag warning lamp on instrument panel in front of driver's seat. in car inside room. The second example, it verified the warning lamp lighting phenomenon of air bag by produced the circuit plate non-contacting of single an element in air bag electronic control unit. The third example, it verified the light of air bag warning indicator lamp by separated with soldering parts connecting inner pin and resistance terminal of seat belt pretensioner using passenger seat. The fourth example, when the passenger car crash a back of truck, the former bumper get jammed under the latter as the roof height of car low less than that. Therefore, the impact of Car's collision verified that don't transfer with body frame of vehicle because of no attachment impact sensor in it.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.95-102
• /
• 2005

There are many tube and pipeline in nuclear power plant under high temperature and high pressure. Erosion and corrosion defects were expected on these tube and pipe-line by environmental and mechanical factors. These erosion and corrosion defects ran be evaluated by ultrasonic technique. In these study, Scanning Laser Source(SLS) technique was applied to detect defect and construct image. This technique also makes detection possible on rough and curved surfaces such as tube and pipe-line by scanning. Conventional ultrasonic scanning technique requires immersion of specimen or water jet for transferring ultrasonic wave between transducer and specimen. However, this SLS technique does not need contacting and couplant to generate surface wave and to get flaw images. Therefore, this SLS technique has several advantages, for complicated production inspection, non-contact, remote from specimen, and high resolution. In this study, SLS images were obtained with various conditions of generation laser ultrasound and receiving in order to enhance detectability of flaws on the tube. Stress corrosion cracks were produced on tube and images of stress corrosion cracks were constructed by using SLS technique.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.2
• /
• pp.84-89
• /
• 2006

A laser ultrasonic inspection system is a non-contact inspection device which generates and measures ultrasounds by using laser beams. A laser ultrasonic inspection system provides a high measurement resolution because the ultrasonic signal generated by a pulse laser beam has a wide-band spectrum and the ultrasonic signal is measured from a small focused spot of a measuring laser beam. In this paper, we have investigated the detection techniques of a surface-breaking crack by using the laser ultrasonic surface waves. A crack acts as a low pass filter whose cut-off frequency is lowered in proportion to the depth of a crack. And, the center frequency value of a spectrum is decreased in proportion to the depth of a crack. In this paper, we extracted the crack information by using the frequency attenuation from the normalized transfer function spectrum of a surface-breaking crack. Also, we effectively measured the crack depth by using the decreasing value of the center frequency from a crack passed ultrasonic signal. The proposed measuring techniques of crack depths provided more precise information than the amplitude measuring technique.