• Journal of the Korea Concrete Institute
• /
• v.16 no.4 s.82
• /
• pp.549-555
• /
• 2004

Cement of three alkalinities (equivalent alkalinities of 0.36,0.52 and 0.97) was employed in fabricating a set of classical G109 type specimens. To-date, these have been subjected to a one week wet-one week dry cyclic pending using 15 w/o NaCl solution. At the end of the dry period, potential and macro-cell current were measured to indicate whether the top reinforcing steel was in the passive or active state. Once this bar became active, the specimen was autopsied and the extent of corrosion was documented. Subsequent to visual inspection, concrete powder samples were collected from the upper region of the top rebar trace; and at a certain times concrete cores were taken from non-reinforced specimens. Using these, determinations were made of (1) critical chloride concentration for corrosion initiation ($Cl_{th}^-$), (2) effective chloride diffusion coefficient ($D_e$), and (3) pore water alkalinity ($[OH^-]$). The pore water alkalinity was strongly related to the alkali content of cement that was used in the mix. The chloride concentration, ($Cl^-$), was greater at active than at passive sites, presumably as a consequence of electro migration and accumulation of these species at active site subsequent to corrosion initiation. Accordingly, ($Cl^-$) at passive sites was considered indicative of the threshold concentration fur corrosion initiation. The $Cl_{th}^-$ was increased with increasing Time-to-corrosion ($T_i$). Consequently, the HA(High Alkalinity) specimens exhibited the highest $Cl_{th}^-$ and the NA(Normal Alkalinity) was the least. This range exceeds what has previously been reported in North America. In addition, the effective diffusion coefficient, $D_e$, was about 40 percent lower for concrete prepared with the HA cement compared to the NA and LA(Low Alkalinity) ones.

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.65-76
• /
• 2002

This study is realized using fuzzy evaluation and AHP(the analytic hierarchy process) for the optimum search of traffic route and estimated by the quantitative analysis in the vague subjective judgement. It is different from classical route search and noticed thinking method of human. Appraisal element, weight, appraisal value of route is extracted from basic of the opinion gathering fur the driving expert and example of route model was used for the finding of practice utility. Model assessment was performed attribute membership function making of estimate element, estimate value setting, weight define by the AHP, non additive presentation of weight according to $\lambda$-fuzzy measure, Choquet fuzzy integral.

• New & Renewable Energy
• /
• v.1 no.3 s.3
• /
• pp.42-50
• /
• 2005

This paper deals with the economic feasibility model and analysis of a hydrogen fuel-cell vehicle [FCV] against two similar types of non-business vehicles fueled with gasoline [GV] and diesel [DV] considering greenhouse gas [GHG]. Considering the price of vehicles and annual operating cost, we build a classical economic feasibility model. Since the economic feasibility could be affected by many input factors such as the prices of vehicles, the price of fuels, annual driving distance and so on, we estimate the average future values of input factors, which is defined as "the average case". Based on the average case, we assess the representative economic feasibility of a FCV with/without GHG, and by changing various annual driving distances, we assess its economy in terms of net-present value, internal rate of return, and payback period. In addition, we make some sensitivity analysis of its economic feasibility by changing the values of the critical input factors one at time. Based on the average case, it turns out that the consumer of a FCV could save 25,000 won/year for a GV, but the consumer could pay 120,000 won/year more for a DV. This indicates that gasoline vehicles could be replaced gradually by FCVs in Korean market which might be formed by those consumers driving annually more than approximately 14,800 km. As the results of our sensitivity analysis, it turns out that a FCV is no more economical if the difference of the prices between FCV and GV is more than 10,130,000 won or the price of hydrogen fuel could be more than 5,136 won/kg.

• Journal of the Korean Geographical Society
• /
• v.43 no.2
• /
• pp.202-219
• /
• 2008

As demand for high speed Internet service has explosively increased in the United States for the past decade, the construction or upgrades of telecommunication infrastructure has also been rapidly followed. Though currently many people in urbanized areas can be provided advanced broadband services, there are still challengeable areas to be served, such as remote or low populated areas because those areas are potentially non-profitable to commercial broadband service providers. This paper addresses the spatial disparity or in a broader term, the 'digital divide' of the broadband access by the county level in the United States. We propose the quantified measure of the county level broadband accessibility for identifying such digital divide. The developed measure is a hybrid form of the classical gravity based potential model and network topological accessibility, encouraged from the lack of prior efforts eying to explicitly incorporate the understanding of the whole process of the Internet access. The computational tasks are performed in a GIS platform, which includes several programmed functions.

• Archives of Plastic Surgery
• /
• v.35 no.3
• /
• pp.349-353
• /
• 2008

Purpose: There are 3 well-known surgical procedures to treat Pierre Robin sequence: tongue-lip adhesion, distraction osteogenesis of mandible, and tracheostomy. The classical tongue-lip adhesion is an effective way to keep airway. The tongue, however, becomes quite non-mobile and appears dormant until the patient could control upper airway and the adhesion can be maintained for prolonged period. Most of all, this procedure does not provide the correction of the micrognathia. Distraction osteogenesis is a good technique to correct micrognathia and to prevent tracheostomies in patients with Pierre Robin sequence. But airway keeping procedure is needed during the distraction period. The purpose of this study is to determine the usefulness of temporary tongue-lip traction during the initial period of mandibular distraction in Pierre Robin sequence patients with severe airway problems requiring operative procedure. Methods: It was a prospective study of 2 Pierre Robin sequence patients aged between 4 months and 6 months requiring surgical procedure to correct recurrent and severe pulmonary complications. Two patients underwent distraction osteogenesis of mandible. During the operation, deep one tension suture was performed to tract the tongue and lip. When the patient gained control of upper airway at the initial period of distraction and micrognathia was corrected, the traction suture was removed. Results: All patients were followed up. No patients complained severe pulmonary complications and tracheostomy could be avoided. No patients had severe pulmonary complication. The pulmonary condition of patients was good. Conclusion: In severe Pierre Robin sequence case, temporary tongue-lip traction is a good assistant method in distraction osteogenesis because this method can avoid tracheostomy.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.5
• /
• pp.89-100
• /
• 2001

The Ritz method Is applied In a three-dimensional (3-D) analysis to obtain accurate frequencies for thick. linearly tapered. annular plates. The method is formulated for annular plates haying any combination of free or fixed boundaries at both Inner and outer edges. Admissible functions for the three displacement components are chosen as trigonometric functions in the circumferential co-ordinate. and a1gebraic polynomials in the radial and thickness co-ordinates. Upper bound convergence of the non-dimensional frequencies to the exact values within at least four significant figures is demonstrated. Comparisons of results for annular plates with linearly varying thickness are made with ones obtained by others using 2-D classical thin place theory. Extensive and accurate ( four significant figures ) frequencies are presented 7or completely free. thick, linearly tapered annular plates haying ratios of average place thickness to difference between outer radius (a) and inner radius (b) radios (h$_{m}$/L) of 0.1 and 0.2 for b/L=0.2 and 0.5. All 3-D modes are included in the analyses : e.g., flexural, thickness-shear. In-plane stretching, and torsional. Because frequency data liven is exact 7o a\ulcorner least four digits. It is benchmark data against which the results from other methods (e.g.. 2-D 7hick plate theory, finite element methods. finite difference methods) and may be compared. Throughout this work, Poisson\`s ratio $\upsilon$ is fixed at 0.3 for numerical calculations.s.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.3
• /
• pp.361-371
• /
• 2006

In recent years, to overcome drawbacks related to the aplicati on of classical structural optimization algorithms, various drift design methods based on factores of member displacement participation factors have been developed to size members if they satisfy stiffness criteria. In particular, a resizing algorithm based on dynamic displacement participation factors from the response spectrum analysis has been applied in the drift design of steel structures subjec ted to seismic lateral forces. In this aproach, active members are selected for displacement control based on the displacement participation fa ve members may be taken out and added to the active members for the drift control. The resizing algorithm can be practically and effectively applied to drift design of high-rise buildings however, the inelastic behavior o f the resizing algorithm has not ben evaluated yet. To develop the resizing algorithm considering the performance of nonlinearity as well a s elastic stifness, the evaluation model of resizing algorithm s is developed and aplied to the examples of moment-resisting steel frame, which is one of the simplest structural systems. The inelastic behavior of moment-resisting steel frame designed by the resizing algorithm is also discussed.

• Journal of Korean Library and Information Science Society
• /
• v.38 no.3
• /
• pp.425-454
• /
• 2007

This study is to present a draft for the formulation of uniform title for sound recordings of the Korean traditional music. The draft as the results of this study is summarized as follows: In a musical work of a type of non-composition, the popular name is put into square brackets as a uniform title of court music and folk music in the old Korean traditional music, and the composer's original title is put into square brackets as a uniform title of the new Korean traditional music, but the medium of performance and others are omitted except an identifying element. However, for the formulation of uniform title of a type of composition in an instrumental music, the descriptive form consisted of the order of 'name of one type of composition, medium of performance, serial number, opus number, key, and a descriptive word or phrase' is put into square brackets as a uniform title and the identifying elements. And in the vocal music of the old Korean traditional music, the following medium of performance is used: in vocal choruses, a type of voices; in solo voices, a type of solo voice by sex, but one of the new Korean traditional music follows the descriptive form of the western classical music.

• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.643-655
• /
• 2020

In the present work, the buckling behavior of a single-layered graphene sheet (SLGS) embedded in visco-Pasternak's medium is studied using nonlocal four-unknown integral model. This model has a displacement field with integral terms which includes the effect of transverse shear deformation without using shear correction factors. The visco-Pasternak's medium is introduced by considering the damping effect to the classical foundation model which modeled by the linear Winkler's coefficient and Pasternak's (shear) foundation coefficient. The SLGS under consideration is subjected to compressive in- plane edge loads per unit length. The influences of many parameters such as nonlocal parameter, geometric ratio, the visco-Pasternak's coefficients, damping parameter, and mode numbers on the buckling response of the SLGSs are studied and discussed.

• Journal of the Korean Society for information Management
• /
• v.19 no.3
• /
• pp.5-30
• /
• 2002

In this paper, classification feature is selected with focus of musical content, note sequences pattern, and measures similarity between note sequences followed by constructing clusters by similar note sequences, which is easier for users to search by showing the similar note sequences with the search result in the CBMR system. Experimental document was $\ulcorner$A Dictionary of Musical Themes$\lrcorner$, the index of theme bar focused on classical music and obtained kern-type file. Humdrum Toolkit version 1.0 was used as note sequences treat tool. The hierarchical clustering method is by stages focused on four-type similarity matrices by whether the note sequences segmentation or not and where the starting point is. For the measurement of the result, WACS standard is used in the case of being manual classification and in the case of the note sequences starling from any point in the note sequences, there is used common feature pattern distribution in the cluster obtained from the clustering result. According to the result, clustering with segmented feature unconnected with the starting point Is higher with distinct difference compared with clustering with non-segmented feature.