• Electronics and Telecommunications Trends
• /
• v.35 no.4
• /
• pp.1-10
• /
• 2020

Since the 1960s, semiconductor packaging technology has developed into electrical joining techniques using lead frames or C4 bumps using tin-lead solder compositions based on traditional reflow processes. To meet the demands of a highly integrated semiconductor device, high reliability, high productivity, and an eco-friendly simplified process, packaging technology was required to use new materials and processes such as lead-free solder, epoxy-based non cleaning interconnection material, and laser based high-speed processes. For next generation semiconductor packaging, the study status of two epoxy-based interconnection materials such as fluxing and hybrid underfills along with a laser-assisted bonding process were introduced for fine pitch semiconductor applications. The fluxing underfill is a solvent-free and non-washing epoxy-based material, which combines the underfill role and fluxing function of the Surface Mounting Technology (SMT) process. The hybrid underfill is a mixture of the above fluxing underfill and lead-free solder powder. For low-heat-resistant substrate applications such as polyethylene terephthalate (PET) and high productivity, laser-assisted bonding technology is introduced with two epoxy-based underfill materials. Fluxing and hybrid underfills as next-generation semiconductor packaging materials along with laser-assisted bonding as a new process are expected to play an active role in next-generation large displays and Augmented Reality (AR) and Virtual Reality (VR) markets.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3045-3050
• /
• 2013

Purpose: Hepatic resection is arguably the preferred treatment for huge hepatocellular carcinoma (H-HCC). Estimating the remnant liver volume is therefore essential. This study aimed to evaluate the feasibility of using computer-assisted volumetric analysis for this purpose. Methods: The study involved 40 patients with H-HCC. Laboratory examinations were conducted, and a contrast CT-scan revealed that 30 cases out of the participating 40 had single-lesion tumors. The remaining 10 had less than three satellite tumors. With the consensus of the team, two physicians conducted computer-assisted 3D segmentation of the liver, tumor, and vessels in each case. Volume was automatically computed from each segmented/labeled anatomical field. To estimate the resection volume, virtual lobectomy was applied to the main tumor. A margin greater than 1 cm was applied to the satellite tumors. Resectability was predicted by computing a ratio of functional liver resection (R) as (Vresected-Vtumor)/(Vtotal-Vtumor) x 100%, applying a threshold of 50% and 60% for cirrhotic and non-cirrhotic cases, respectively. This estimation was then compared with surgical findings. Results: Out of the 22 patients who had undergone hepatectomies, only one had an R that exceeded the threshold. Among the remaining 18 patients with non-resectable H-HCC, 12 had Rs that exceeded the specified ratio and the remaining 6 had Rs that were < 50%. Four of the patients who had Rs less than 50% underwent incomplete surgery due to operative findings of more extensive satellite tumors, vascular invasion, or metastasis. The other two cases did not undergo surgery because of the high risk involved in removing the tumor. Overall, the ratio of functional liver resection for estimating resectability correlated well with the other surgical findings. Conclusion: Efficient pre-operative resectability assessment of H-HCC using computer-assisted volumetric analysis is feasible.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.103-108
• /
• 2004

Carbon fiber reinforced composites(CFRP) were fabricated with phenolic resin matrix by hot press molding, and its surface was modified by the ion-assisted reaction process. When we tested the friction coefficient and wear rate variation and observed the effect of fibers with respect to friction and wear characteristics, the amount of pitch based carbon fiber was 45wt% and the average friction coefficient was the lowest at 0.12. When the amount of ion-irradiation was $1\times10^{l6}ions/cm^2$, the friction coefficient of the composites was about 0.12 and the wear mode was stable, whereas, the friction coefficient of the non-treated composites was about 0.16 and the wear mode was very unstable. But if the amount of ion-irradiation was $5\times10^{l6}ions/cm^2$$1\times10^{l6}ions/cm^2$ion-irradiation case.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.481-484
• /
• 2008

In order to reduce IR drop through common electrode in AMOLED, we propose a novel method to form electrical contact between highly-conductive bus lines and common electrode by using a plasma-assisted patterning of OLED layers and double deposition of the common electrode. Plasma-assisted patterning effects on OLED performance and degradation have been investigated. This patterning method caused turn-on voltage decrease, current flow increase at the same applied OLED voltages, quantum efficiency decrease, and rapid degradation at early stage during the lifetime test. However, comparable 70% luminance lifetime were obtained for both patterned and non-patterned OLEDs.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.67-72
• /
• 2002

The two stage laccase-assisted delignification process led to significant lignin removal in the non-pressurized treatments. It is clearly shown that an alkaline extraction prior to the second laccase treatment significantly increased the overall delignification by ∼15%. This is in line with the contention that the residual lignin has undergone structural changes during the alkaline extraction, and the resulting modified structures are susceptible to the laccase oxidation. In phenolic hydroxyl group, the pre- methylated sample was very responsive to the delignification process. The phenolic hydroxyl groups could be increased during side chain cleavage catalyzed by laccase. This finding demonstrates that the delignification oi etherified structures is an important reaction in the delignificaton by laccase.

• Korean Journal of Radiology
• /
• v.21 no.11
• /
• pp.1220-1229
• /
• 2020

Objective: Stereotactic vacuum-assisted breast biopsy (VABB) is considered a reliable alternative to surgical biopsy for suspicious calcifications. In most cases, the management of flat epithelial atypia (FEA) and atypical ductal hyperplasia (ADH) after VABB with residual calcifications requires surgical excision. This study aimed to evaluate the impact of pathology of non-calcified specimens on the underestimation of malignancy. Materials and Methods: We retrospectively reviewed 1147 consecutive cases of stereotactic VABB of suspicious calcifications without mass from January 2010 to December 2016 and identified 46 (4.0%) FEA and 52 (4.5%) ADH cases that were surgically excised for the retrieval of residual calcifications. Mammographic features and pathology of the calcified and non-calcified specimens were reviewed. Results: Seventeen specimens (17.3%) were upgraded to malignancy. Mammographic features associated with the underestimation of malignancy were calcification extent (> 34.5 mm: odds ratio = 6.059, p = 0.026). According to the pathology of calcified versus non-calcified specimens, four risk groups were identified: Group A (ADH vs. high-risk lesions), Group B (ADH vs. non-high-risk lesions), Group C (FEA vs. high-risk lesions), and Group D (FEA vs. non-high-risk lesions). The lowest underestimation rate was observed in Group D (Group A vs. Group B vs. Group C vs. Group D: 35.0% vs. 20.0% vs. 15.0% vs. 3.6%, p = 0.041, respectively). Conclusion: Considering that the calcification extent and pathology of non-calcified specimens may be beneficial in determining the likelihood of malignancy underestimation, excision after FEA or ADH diagnosis by VABB is required, except for the diagnoses of FEA coexisting without atypia lesions in non-calcified specimens.

• International Journal of Human Ecology
• /
• v.14 no.1
• /
• pp.87-102
• /
• 2013

This study investigated residents' preferences for spatial features of sitting areas in assisted living facilities, and provides recommendations for planning sitting areas to support residents' spatial preferences and social interaction. The study participants were 69 residents of eight assisted living facilities (30+ resident capacity), located in south central Texas. A photographic comparison method was used, in which residents were shown 20 matched pairs of photos, with a single feature digitally modified in each pair, and asked to select which environmental representation they preferred. The hypothesized spatial characteristics were identified in practice based literature as those that may encourage usage of sitting areas: viewability, variety, homelikeness, and privacy. Most of the hypothesized features were preferred by participants, with the highest preference found for non-institutional furniture arrangements and naturalness, followed by increasing enclosure and variety of seating. Preference was less significant for domestic cues such as carpeted floors, divided light windows, and boundaries defined by different colored material or columns, possibly due to their physical impairments or preference for visual openness. Participants' level of mobility assistance was significantly related to their preference for some features, such as seating with people-watching capability, and carpeted floors. The findings have implications for facility architects and administrators engaged in resident-oriented spatial planning.

• Journal of the Korean Society of Combustion
• /
• v.12 no.4
• /
• pp.8-13
• /
• 2007

Plasma assisted combustion is an old subject for the combustion society, but recently, the subject is refocused partly because techniques for non-thermal plasmas are progressed significantly, and partly because there are lots of applications which need to be overcome by a new reaction technology. In the present study, we have developed plasma assisted burner (plasma burner), which can be used as a heating source in a diesel particulate filter system. The burner can burn 20-60 cc/min of diesel fuel with 50 lpm of fresh air in an exhaust pipe of 2.0 liter diesel engine. Using 20 cc/min of diesel fuel, an exhaust temperature for 2.0 liter diesel engine can be raised up to around $600^{\circ}C$ for a wide range of engine speed (idle-3,000 rpm). The characteristics of the plasma burner are reported, and the possible operating mechanism of it will be discussed based on the effects of an electric field and a plasma on flames.

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.202-206
• /
• 2007

Plasma assisted combustion is an old subject for the combustion society, but recently, the subject is refocused partly because techniques for non-thermal plasmas are progressed significantly, and partly because there are lots of applications which need to be overcome by a new reaction technology. In the present study, we have developed plasma assisted burner (plasma burner), which can be used as a heating source in a diesel particulate filter system. The burner can bum 20 - 60 cc/min of diesel fuel with 50 lpm of fresh air in an exhaust pipe of 2.0 liter diesel engine. Using 20 cc/min of diesel fuel, an exhaust temperature for 2.0 liter disel engine can be raised up to around $600^{\circ}C$ for the range of engine speeds is idle - 3,000 rpm. The characteristics of the plasma burner are reported, and the possible operating mechanism of it will be discussed based on the effects of an electric field and a plasma on flames.

• Women's Health Nursing
• /
• v.16 no.4
• /
• pp.409-418
• /
• 2010

Purpose: The purpose of this study was to identify the effects of a pre-operation video assisted education program on residual urine, gas passing and state anxiety in women undergoing hysterectomy. Methods: Nonequivalent control group non-synchronized design was used for the study. In the research, video assisted education program was applied to the experimental group while a similar conventional education was done to the control group. The pre-operation state anxiety and post-operation residual urine and gas discharge of both the groups were measured. The data were analyzed using SPSS. Results: The experimental group was significantly higher than control group on gas passing (t=3.04, p=.00). However the residual urine (t=0.34, p=.73) and state anxiety (t=0.81, p=.82) did not make significant differences. Conclusion: This study is very meaningful in that it developed and provided a nursing intervention can positively affect hysterectomy patients. The pre-operation video assisted education program may be an effective nursing intervention that is clinically practical and useful to reduce time of the gas passing of hysterectomy patients after the operation.