• Title/Summary/Keyword: node width

Search Result 94, Processing Time 0.03 seconds

A Study of Detent force Minimization Using Notch in Slotted Pemanent Magnet Linear Synchronous Motor (PMLSM의 디텐트력 최소화를 위한 Notch의 적용에 관한 연구)

  • Lee, Dong-Yeup;Zhou, Jian-Pei;Huang, Rui;Kim, Gyu-Tak
    • Proceedings of the KIEE Conference
    • /
    • 2005.04a
    • /
    • pp.40-42
    • /
    • 2005
  • In this paper, thrust ripple is minimized using notch and slot-aperture width adjustment in a slotted PMLSM and then optimal design was achieved by using a neural network. This paper has used the moving model node technique to reduce the time and the effort for calculation according to changing design parameters. As the result, the detent force of optimal model is decreased from 9.44[N] to 0.97[N] greatly compare with it of basic model. The thrust is decreased 1.3[%] from 342.07[N] to 337.48[N] a little.

  • PDF

Analysis of the effect of preventing breakage by formation of the joint insulation structure in the coating-sheet composite waterproofing method (도막-시트 복합방수공법에서의 접합부 절연구조 형성을 통한 파단방지 효과 분석)

  • Choi, Sung-Min;Oh, Sang-Keun;Park, Jin-Sang;Kim, Dong-Bum;Park, Wan-Goo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2021.05a
    • /
    • pp.4-5
    • /
    • 2021
  • In this study, in the coating-sheet composite waterproofing method, a specimen was formed to prevent the transmission of the no-node tensile stress occurring under the junction between sheets by forming an insulating structure when the junction was formed, and to compare the effect of preventing breakage with the existing common junction. For this, tensile performance evaluation was conducted. As a result of the evaluation, it was confirmed that it exhibited higher tensile strength compared to the existing joint and at the same time exhibited a large width of displacement characteristics, and thus, had an effect of preventing breakage.

  • PDF

FINITE ELEMENT STRESS ANALYSIS OF A CLASS II COMPOSITE RESIN RESTORATION (2급 와동의 복합레진 충전에 관한 유한요소법적 응력분석)

  • Song, Bo-Kyung;Um, Chung-Moon
    • Restorative Dentistry and Endodontics
    • /
    • v.20 no.2
    • /
    • pp.627-643
    • /
    • 1995
  • The resistance to fracture of the restored tooth may be influenced by many factors, among these are the cavity dimension and the physical properties of the restorative material. The placement of direct composite resin restorations has generally been found to have a strengthening effect on the prepared teeth. It is the purpose of this investigation to study the relationship between the cavity isthmus and the fracture resistance of a tooth in composite resin restorations. In this study, MO cavity was prepared on the maxillary left first molar and then filled with composite resin. Three dimentional model with 3049 nodes and 2450 8-node blick elements was made by the serial photographic method and isthmus (1/4, 1/3, 1/2 and 2/3 of intercusplal distance between mesiobuccal cusp tip and mesiolingual cusp tip) was varied. Two types of model(B and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall and R model was left unfilled. A load of 1500N was applied vertically on the node from the lingual slope of the mesiobuccal cusp. The results were as follows : 1. There was a significant decrease of stress resulting in increase of fracture resistance in B model when compared with R model. 2. When it comes to stress distribution, the stress was concentrated in the facio-gingival line angle and the buccal side of the distal margin of the cavity in both Band R model. 3. With the increase of the isthmus width, the stress decreased in the area of the facio-gingival line angle, and increased in the area of facio-gingival line angle as well as the buccal side of the distal margin of the cavity in B model. In R model, the stress increased both in the area of facio-gingival line angle and the buccal side of the distal margin of the cavity, therefore the possibility of crack increased. 4. As the width of cavity increased, in B model, the direction of crack moved from horizontal to vertical on the facio-gingival line angle and the facio-pulpal line angle. In R model, the direction of the crack was horizontal on the facio-gingival line angle and moved from horizontal to the $45^{\circ}$ direction on the facio-pulpal line angle.

  • PDF

The effect of implant system with reverse beveled platform design on marginal bone stress distribution (임플란트 경부의 역사면 디자인이 변연골 응력분포에 미치는 영향)

  • Cha, Ji-Young;Cho, Jin-Hyun;Jo, Kwang-Hun
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.48 no.4
    • /
    • pp.266-272
    • /
    • 2010
  • Purpose: The purpose of this study was to investigate the effects of the surface morphology of the implant neck on marginal bone stress measured by using finite element analysis in six implant models. Materials and methods: The submerged type rescue implant system (Dentis co., Daegu, Korea) was selected as an experimental model. The implants were divided into six groups whose implant necks were differently designed in terms of height (h, 0.4 and 1.0 mm) and width (platform width, w = 3.34 + 2b [b, 0.2, 0.3 and 0.4 mm]). Finite element models of implant/bone complex were created using an axisymmetric scheme. A load of 100 N was applied to the central node on the top of crown in parallel with the implant axis. The maximum compression stress was calculated and compared. Results: Stress concentration commonly observed around dental implants did not occur in the marginal bone around all six test implant models. Marginal bone stress varied according to the implant neck bevel which had different width and height. The stress was affected more markedly by the difference in height than in width. Conclusion: This result indicates that the implant neck bevel may play an important role in improving stress distribution in the marginal bone area.

Effects of Vine Induction Method on the Growth and Fruit Yield in Korean Schisandra (오미자 덩굴 유인방법이 생육 및 과실 수량에 미치는 영향)

  • Kim, Ju Ho;Lee, Beom Gyun;Choi, Eun Young
    • Korean Journal of Medicinal Crop Science
    • /
    • v.25 no.2
    • /
    • pp.83-88
    • /
    • 2017
  • Background: This study was aimed to determine the optimal vine induction method for growing of Korean schisandra (Schisandra chinensis), by comparing plant growth and fruit yields between plants grown with either fence-type (U-type) or A-type induction. Methods and Results: Plants were transplanted on August 17, 2014, and the plant height, stem node number and weight were measured every two weeks, six times from June 17, 2016. The plant height, stem node number, and leaf length and width were higher with the A-type than with the U-type induction, by approximately 37.0%, 49.1%, 27.6%, and 12.7%, respectively. Although there was no significant difference between the photosynthesis rates of plants grown with the two vine induction method, the leaf area and leaf number per plant were higher in the plants grown with the A-type than the U-type, by approximately 23.7% and 46.0%, respectively. The number of green-color pixels, in a defined area of digital camera images of creeper leaves from the inducted vines, was significantly higher in the plants grown with the A-type than the U-type. The number of fruit clusters per plant was approximately 26 and 36, under the U-type and A-type, respectively. A two fold higher total fruit weight per plant was observed in the plants grown under the A-type (250 g/plant) than the U-type (120 g/plant). Conclusions: The A-type vine induction method is optimal for cultivation of Korean schisandra.

Electronic properties of graphene nanoribbons with Stone-Wales defects using the tight-binding method

  • M.W. Chuan;S.Z. Lok;A. Hamzah;N.E. Alias;S. Mohamed Sultan;C.S. Lim;M.L.P Tan
    • Advances in nano research
    • /
    • v.14 no.1
    • /
    • pp.1-15
    • /
    • 2023
  • Driven by the scaling down of transistor node technology, graphene became of interest to many researchers following the success of its fabrication as graphene nanoribbons (GNRs). However, during the fabrication of GNRs, it is not uncommon to have defects within the GNR structures. Scaling down node technology also changes the modelling approach from the classical Boltzmann transport equation to the quantum transport theory because the quantum confinement effects become significant at sub-10 nanometer dimensions. The aim of this study is to examine the effect of Stone-Wales defects on the electronic properties of GNRs using a tight-binding model, based on Non-Equilibrium Green's Function (NEGF) via numeric computation methods using MATLAB. Armchair and zigzag edge defects are also implemented in the GNR structures to mimic the practical fabrication process. Electronic properties of pristine and defected GNRs of various lengths and widths were computed, including their band structure and density of states (DOS). The results show that Stone-Wales defects cause fluctuation in the band structure and increase the bandgap values for both armchair GNRs (AGNRs) and zigzag GNRs (ZGNRs) at every simulated width. In addition, Stone-Wales defects reduce the numerical computation DOS for both AGNRs and ZGNRs. However, when the lengths of the structures increase with fixed widths, the effect of the Stone-Wales defects become less significant.

Clinicopathological Characteristics of Superficially Spreading Early Gastric Cancer (표층 확장형 조기위암의 임상병리학적 특성)

  • Kwon, Sung-Joon;Kim, Hyoung-Ju
    • Journal of Gastric Cancer
    • /
    • v.5 no.4 s.20
    • /
    • pp.288-294
    • /
    • 2005
  • Purpose: Superficially spreading (SS) early gastric cancer (EGC) is characterized by wide horizontal extension without deep vertical invasion. It is a relatively rare form of EGC, and it's clinicopathological (C-P) characteristics are not evident. This study aimed to clarify their C-P characteristics. Materials and Methods: We defined SS EGC as invading less than the submucosal layer that measured more than 60 mm in diameter or wider than $5{\times}5cm \;(25cm^2)$ in width. The C-P characteristics and prognosis were compared between 69 patients with SS EGC and 319 patients with the common type EGC (EGC except SS type). Results: For SS EGC lymph node metastases, Lauren's diffuse type, lymphatic invasion were significantly higher than in common type EGC. In patients with SS EGC, all of the metastatic lymph nodes were anatomically distributed within the paragastric region, with fewer along the left gastric artery and common hepatic artery. In 6 cases of SS EGC with resection marqins less than 10 mm, there was no death during the follow-up period (4 to 13 years after operation) if margins were not involved. Age (>58 yrs), tumor site (upper 1/3), lymph node metastasis, submucosal invasion were statistically significant poor prognostic factor in univariate survival analysis. In multivariate survival analysis, age and lymph node metastasis were independent prognostic factors. However, tumor diameter or width was not a significant prognostic factor. Conclusion: Although SS EGC has histologically distinct properties, gastrectomy with free surgical margins and appropriate lymph node dissection $(D1+{\beta})$ could be a suitable treatment.

  • PDF

A Study on Knit Flare Skirts of Hem for 3D Virtual Clothing System - Focused on the Angle of Flare Skirt - (가상착의 시스템을 통한 니트 플레어스커트의 드레이프 형상에 관한 연구 - 각도에 따른 플레어스커트를 중심으로 -)

  • Ki, Hee-Sook
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.15 no.2
    • /
    • pp.77-89
    • /
    • 2013
  • This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: $90^{\circ}$ and $180^{\circ}$), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of $180^{\circ}$ than $90^{\circ}$. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of $90^{\circ}$ with the number of nodes and silhouette angle increasing in the wale direction at the angle of $180^{\circ}$.

  • PDF

Rhizome Growth and Flowering of White Lotus (Nelumbo nucifera) at Muan Hoesan-Lake (무안 회산지(回山池) 백련꽃의 근경생장과 개화특성)

  • Im, Myung Hee;Park, Yong Seo;Hou, Won Noung;Park, Yun Jum;Heo, Buk Gu
    • FLOWER RESEARCH JOURNAL
    • /
    • v.17 no.1
    • /
    • pp.15-22
    • /
    • 2009
  • This study was conducted to examine characteristics of rhizome growth and flowering of white lotus (Nelumbo nucifera) plant in Muan Hoesan-lake for collecting the basic data on the cultivation and the flowering which is growing in Muan Hoesan-lake of Jeonnam province in Korea. We have planted from the seeds and the enlarged rhizomes of the white lotus which were planted in the plastic containers on April 20 and May 4, 2008, and cultivated under rain shelter condition. Rhizome growth pattern and the flowering characteristics of the white lotus were examined on September 4, 2008. Main rhizomes of the white lotus propagated by the seeds and the enlarged rhizomes were branched by 10% and 15%, respectively. Numbers of nodes in the bloomed and non-bloomed rhizomes of the white lotus were over 14 and below 11, respectively. Flower was not observed in the white lotus when propagated with seeds, however, flowers came out up to 80% by the enlarged rhizomes. First flowers were bloomed from the late July and to the early August, and the number of flowers were 4.0~4.4. The first flower stalks without branching of the main rhizome were emerged in 8.8th node, however, that with branching were 8.0th node. Time to flowering from the emergence of flower stalk on the above-ground parts were required 16 days. White flowers from the lotus were 15.3 cm in height and 28.2 cm in width, their longevity was 3.3 days and the averaged flower fresh weight was 29.2 g. The results conclude that optimum number of nodes on the main rhizomes for blooming the white lotus flowers should be over 8 nodes before the rhizome enlargement.

Structure and Implementation of Fully Interconnected ATM Switch (Part II : About the implementation of ASIC for Switching Element and Interconnected Network of Switch) (완전 결합형 ATM 스위치 구조 및 구현 (II부 스위치 엘리먼트 ASIC화 및 스위치 네트워크 구현에 대하여))

  • 김경수;김근배;박영호;김협종
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.21 no.1
    • /
    • pp.131-143
    • /
    • 1996
  • In this paper, we propose the improved structure of fully interconnected ATM Switch to develop the small sized switch element and represent practical implementation of switch network. As the part II of the full study about structure and implementation of fully interconnected ATM Switch, this paper especially describes the implementation of an ATM switching element with 8 input port and 8 output port at 155 Mbits/sec each. The single board switching element is used as a basic switching block in a small sized ATm switch for ATM LAN Hub and customer access node. This switch has dedicated bus in 12 bit width(8 bit data + 4 bit control signal) at each input and output port, bit addressing and cell filtering scheme. In this paper, we propose a practical switch architecture with fully interconnected buses to implement a small-sized switch and to provide multicast function withoutany difficulty. The design of switching element has become feasible using advanced CMOS technology and Embedded Gate Array technology. And, we also represent Application Specific Integrated Circuit(ASIC) of Switch Output Multiplexing Unit(SOMU) and 12 layered Printed Circuit Board for interconnection network of switch.

  • PDF