• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.4
• /
• pp.149-153
• /
• 2019

HVPE is one of the GaN single crystal manufacturing methods which has been commercially widely used due to its high growth rate. HVPE method consists of a number of processes, in particular the nitridation of the substrate prior to GaN growth has a significant effect on the crystalline quality of the manufactured GaN single crystal. In this study, we investigated the effect of nitridation for crystalline quality of GaN when it was grown on the sapphire substrate. The whole growth conditions except for the nitridation process were the same, and the gas flow rate supplied to the sapphire substrate was variously changed during the nitridation. Here, we examined the effect of nitridation via the surface characterization of GaN single crystal grown by HVPE.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.747-752
• /
• 2014

This paper relates 10% shrink from $0.13{\mu}m$ design for logic devices as well as input and output (I/O) circuits, different from the previous shrink methodologies which shrink only core device. Thin gate oxide was changed to decoupled plasma nitridation(DPN) oxide as a thin gate oxide (1.2V) to reduce the flicker noise, resulting in three to five times lower flicker noise than pre-shrink process. Unavoidable issue by shrink is capacitor for this normally metal insulator metal (MIM). To solve this issue, 20% higher unit MIM capacitor ($1.2fF/{\mu}m^2$) was developed and its performance were evaluated.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.49-55
• /
• 2001

Josephson junction arrays were fabricated by DC magnetron sputtering, self-aligning and reactive ion etching technique. The Al native oxide, formed by thermal oxidation, was used as the tunneling barrier of Nb/$Al-A1_2$$O_3$Nb trilayer. The arrays have 2,000 Josephson junctions with the area of $14\mu\textrm{m}$ $\times$ $46\mu\textrm{m}$. The gap voltages were in the range of 2.5 ~2.6 mV and the spread of critical current was $\pm$11~14%. When operated at 70~94 ㎓, the arrays generated zero-crossing steps up to 2.1~2.4 V. To improve transmission of microwave power and prevent diffusion of oxygen into Nb ground-plane while depositing $SiO_2$dielectric, we applied a plasma nitridation process to the Nb ground-plane. The microwave power was well propagated in Josephson junction arrays with nitridation. The difference in microwave transmission 7an be interpreted by the surface impedance change depending on nitridation.

• Journal of Powder Materials
• /
• v.25 no.6
• /
• pp.482-486
• /
• 2018

Despite numerous advances in the preparation and use of GaN, and many leading-edge applications in lighting technologies, the preparation of high-quality GaN powder remains a challenge. Ammonolytic preparations of polycrystalline GaN have been studied using various precursors, but all were time-consuming and required high temperatures. In this study, an efficient and low-temperature method to synthesize high-purity hexagonal GaN powder is developed using sub-micron $Ga_2O_3$ powder as a starting material. The sub-micron $Ga_2O_3$ powder was prepared by an ultrasonic spray pyrolysis process. The GaN powder is synthesized from the sub-micron $Ga_2O_3$ powder through a nitridation treatment in an $NH_3$ flow at $800^{\circ}C$. The characteristics of the synthesized powder are systematically examined by X-ray diffraction, scanning and transmission electron microscopy, and UV-vis spectrophotometer.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.12
• /
• pp.1649-1655
• /
• 1988

Thermally growon SiO2 films were thermally nitrided in a hot-wall furnace and in a RF-heated cold-wall reactor and their characteristics were investigated by the AES and the C-V dmeasurements. The Auger depth profile show that 200\ulcornerSiO2 film nitrided at 1200\ulcorner, for 2hrs by the hot-wall process has a nitrogen-rich layer near the SiOxNy-Si interface. However the nitrogen-ri h layer is not observed in the case of cold-wall process. The maximum flat-band voltage for the SiO2 films nitrided by the hot-wall process is higher than by the cold-wall process, and the peak value of flat-band voltage for the hot-wall process appears the longer nitridation time than that for the cold-wall process. The SiOxNy-Si interface shift toward the Si substrate for the case of the hot-wall process is larger than that for the cold-wall process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.296-299
• /
• 2008

The effects of radio frequency (RF) source power for decoupled plasma nitridation (DPN) process on the electrical properties and Fowler-Nordheim (FN) stress immunity of the oxynitride gate dielectrics for deep nano-technology devices has been investigated. With increase of RF source power, the threshold voltage (Vth) of a NMOS transistor(TR) decreased and that of a PMOS transistor increased, indicating that the increase of nitrogen incorporation in the oxynitride layer due to higher RF source power induced more positive fixed charges. The improved off-current characteristics and wafer uniformity of PMOS Vth were observed with higher RF source power. FN stress immunity, however, has been degenerated with increasing RF source power, which was attributed to the increased trap sites in the oxynitride layer. With the experimental results, we could optimize the DPN process minimizing the power consumption of a device and satisfying the gate oxide reliability.

• 한국초전도학회:학술대회논문집
• /
• v.11
• /
• pp.33-33
• /
• 2001

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.1-4
• /
• 1998

In this paper, we have studied a variation of I-V characteristics, and time-dependent dielectric breakdown(TDDB) of thin layer NO and ONO film depending on nitridation and reoxidation time, respectively, and measured a variation of leakage current and charge-to-breakdown(Q$\_$bd/) of optimized NO and ONO film depending on ambient temperature, and then compared with the properties of conventional SiO$_2$. From the results, we find that these NO and ONO thin films are strongly influenced by process time and the optimized ONO film shows superior dielectric characteristics, and Q$\_$bd/ performance over the NO film and SiO$_2$, while maintaining a similar electric field dependence compared with NO layer.

• Journal of Powder Materials
• /
• v.15 no.6
• /
• pp.489-495
• /
• 2008

Colored tantalum oxy-nitride (TaON) and tantalum nitride ($Ta_{3}N_{5}$) were synthesized by ammonolysis. Oxygen deficient tantalum oxides ($TaO_{1.7}$) were produced by a titration process, using a tantalum chloride ($TaCl_5$) precursor. The stirring speed and the amount of $NH_{4}OH$ were important factors for controling the crystallinity of tantalum oxides. The high crystallinity of tantalum oxides improved the degree of nitridation which was related to the color value. Synthesized powders were characterized by XRD, SEM, TEM and Colorimeter.

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.55-55
• /
• 2002