• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.634-637
• /
• 2005

A subjective index of sound quality when it hit him is required since human listening is very sensitive and complex. Sound quality evaluation it leads consequently rightly in each situation and it composes a sound quality factor. But one of the levels in interest frequency range is substitute we cannot see the tendency of frequency substitute at whole that is executes a clear voice evaluation. Design of experiment is used and dividing 12 equally in frequency domain, the sound quality using sharpness and annoyance is performed by modifying each of frequency domains. Design of experiment method reduces much number experiment very effectively and each main effect of domain solution analysis, such as a case of sharpness and annoyance, the change of domain (increase and decrease of sound pressure level, or change nil) can grasp a type of effect should have influenced to a sound quality, and it will be able to select the objective frequency domain which hits to the sound quality. Through these obtained results the physical changes of level at arbitrary frequency domain sensitivity can be adapted.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1674-1680
• /
• 2009

This paper proposes an autonomous fault determination, fault zone isolation and fault restoration strategy based on the ethernet communication as a new attempt to solve the problem the of the existing central control method. In proposed method, The FRTU(Feeder Remote Terminal Unit)s on the feeder determines autonomously where the faulted zone is by exchanging the voltage and current information with neighbor FRTUs based on the network communication, and then separates the faulted zone in an nil-voltage status to make the protective device to reclose successively. In particular, the minimization of outage time and relational load balancing is archived by each interconnection switch which determines autonomously the load zone to be allocated among those zones after the sound outage zones was separated individually. Finally, to show effectiveness of the proposed fault restoration strategy, the several fault cases are simulated for the test distribution system, and the load balancing index of the proposed solution is compared with all of feasible solutions.

• 대한수학회지
• /
• 제60권6호
• /
• pp.1233-1254
• /
• 2023

We introduce two subclasses of abelian McCoy rings, so-called π-CN-rings and π-duo rings, and systematically study their fundamental characteristic properties accomplished with relationships among certain classical sorts of rings such as 2-primal rings, bounded rings etc. It is shown that a ring R is π-CN whenever every nilpotent element of index 2 in R is central. These rings naturally generalize the long-known class of CN-rings, introduced by Drazin [9]. It is proved that π-CN-rings are abelian, McCoy and 2-primal. We also show that, π-duo rings are strongly McCoy and abelian and also they are strongly right AB. If R is π-duo, then R[x] has property (A). If R is π-duo and it is either right weakly continuous or every prime ideal of R is maximal, then R has property (A). A π-duo ring R is left perfect if and only if R contains no infinite set of orthogonal idempotents and every left R-module has a maximal submodule. Our achieved results substantially improve many existing results.

• 한국압력기기공학회 논문집
• /
• 제10권1호
• /
• pp.100-106
• /
• 2014

There is a growing need to introduce advanced pressure vessel steels with higher strength and toughness for the optimizatiooCn of the design and construction of longer life and larger capacity nuclear power plants. SA508 Gr.4N Ni-Cr-Mo low alloy steels have superior strength and fracture toughness, compared to SA508 Gr.3 Mn-Mo-Ni low alloy steel. Therefore, the application of SA508 Gr.4N low alloy steel could be considered to satisfy the strength and toughness required in advanced nuclear power plants. The purpose of this study is to characterize the microstructure and mechanical properties of SA508 Gr.4N low alloy steels. 1 ton ingot of SA508 Gr.4N model alloy was fabricated by vacuum induction melting followed by forging, quenching, and tempering. The predominant microstructure of the SA508 Gr.4N model alloy is tempered martensite having small packet and fine Cr-rich carbides. The yield strength at room temperature was 540MPa, and it was decreased with an increase of test temperature while DSA phenomenon occurred at around $288^{\circ}C$. Overall transition property of SA508 Gr.4N model alloy was much better than SA508 Gr.3 low alloy steel. The index temperature, $T_{41J}$, of SA508 Gr.4N model alloy was $-132^{\circ}C$ in Charpy impact tests, and reference nil-ductility transition temperature, $RT_{NDT}$ of $-105^{\circ}C$ was obtained from drop weight tests. From the fracture toughness tests performed in accordance with the ASTM standard E1921 Master curve method, the reference temperature, $T_0$ was $-147^{\circ}C$, which was improved more than $60^{\circ}C$ compared to SA508 Gr.3 low alloy steels.

• 한국컴퓨터정보학회논문지
• /
• 제16권10호
• /
• pp.33-43
• /
• 2011

최근 위치 확인 기술과 이동 통신의 발전에 따라 이동 객체의 위치에 기반한 서비스의 요구가 증가하고 있다. 이에 따라, 이동 객체의 위치 정보를 관리할 수 있는 다양한 색인에 대한 연구가 진행되고 있다. 유클리드 공간의 색인은 이동의 제약이 없기 때문에 이동의 제약이 강한 실세계에 적용하기 어렵다. 도로 네트워크 공간의 색인의 경우에는 인접도로의 연결 정보 알기 위해 추가적인 비용이 드는 문제점이 있다. 또한, 기존의 연구들은 건물, 병원과 같은 위치가 고정되어 있는 객체는 고려하지 않고 있다. 본 논문에서는 도로 네트워크 공간에서 이동 객체의 현재 위치를 효율적으로 관리하기 위한 색인을 제안한다. 제안하는 색인 구조는 도로망을 격자로 분할하여 도로 연결 정보를 색인 구조에포함하였고 고정 객체를 위해 별도의 색인을 유지한다. 그리고 실험을 통하여 기존의 기법보다 제안 색인의 성능이 우수함을 보인다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권6호
• /
• pp.806-811
• /
• 2002

A 90 d study was designed to investigate the effects of rumen undegradable protein (RUP) and a mixture of Cu, Zn and Mn proteinate (CZMP) on milk yield and composition and ovarian functions during rainy months. Twenty four Holstein${\times}$ indigenous cows in their 2nd and 3rd lactation were randomly allocated to total mixed rations (TMR) containing soy bean meal (SBM) as a source of rumen degradable protein (RDP), SBM plus CZMP, and formalin treated SBM (FSBM) as a source of RUP. Maximum and minimum temperature humidity index during the experimental period were 83.6-84.7 and 75.4-76.1. There were no differences (p>0.05) in intakes of dry matter, crude protein and net energy and in contents of butterfat, lactose and minerals. Cows on TMR containing FSBM not only lost less weight (-278, -467 and -433 g/d) with more intake of RUP (0.92, 0.58 and 0.59 kg/d) but also produced more milk (19.27, 18.23 and 18.13 kg/d) and 4% fat corrected milk (18.57, 17.57 and 17.51 kg/d) with more protein (3.06, 2.81 and 2.80%), solids-not-fat (8.69, 8.38 and 8.38%) and less milk urea N (9.3, 15.4 and 15.0 mg/dl) compared with those on TMR containing SBM and SBM+CZMP, respectively (p<0.01). However, cows on TMR containing SBM and SBM+CZMP did not differ in these respects (p>0.05). Whereas incidence of cystic ovaries at 20 and 90 d pospartum was less (p<0.01) in cows on TMR containing SBM+CZMP (37.3 and 12.5%) than those on TMR containing SBM (62.5 and 25%), it was nil for cows on TMR containing FSBM. Cows in all three group differed (p<0.01) from each other for the recurrence of first observed estrus with those on TMR containing FSBM having least days (22, 36 and 47 d) compared with their counterpart on TMR containing SBM+CZMP and SBM, repectively. The results suggest that RUP is one of the limiting factors affecting milk yield and its composition and ovarian functions during early lactation of dairy cows in the tropics.