• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.16-27
• /
• 2010

Purpose: The aim of this experimental study is to observe the effect of platelet-rich plasma (PRP) on early bone regeneration of rats both in normal condition and in osteoporosis induced by ovariectomy. Material and methods: Total 40 Sprague-Dawley female rats were divided into 4 groups. A 8-mm-diameter calvarial critical-sized defect (CSD) was made by drilling with trephine at the center of calvaria in cranium of every rat. Every CSD was augmented with an osteoconductive synthetic alloplastic substitute ($MBCP^{TM}$) and PRP as follows. Group A; 10 non-ovariectomized rats grafted with only $MBCP^{TM}$. Group B; 10 non-ovariectomized rats grafted with $MBCP^{TM}$ and PRP. Group C; 10 ovariectomized rats grafted with only $MBCP^{TM}$. Group D; 10 ovariectomized rats grafted with $MBCP^{TM}$ and PRP. At 4 weeks after graft, every rat was sacrificed. And histomorphometric analysis was performed by measuring calcified area of new bone formation within the CSD. Results: Comparing four groups, results were obtained as follows. 1. In non-ovariectomized groups, PRP showed a positive effect somewhat but not significant (P > .05). 2. In ovariectomized groups, PRP showed a positive effect significantly (P < .05). 3. In PRP untreated groups, ovariectomy diminished bone regeneration significantly (P < .05). 4. In PRP treated groups, ovariectomy diminished bone regeneration somewhat but not significant (P > .05). Conclusion: Within the limitation of this study, it can be concluded that PRP in combination with an osteoconductive synthetic alloplastic substitute has an effect on bone regeneration more significantly in ovariectomized osteoporotic rats than in normal rats.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.191-198
• /
• 2009

Statement of problem: Ceramics have been important materials for the restoration of teeth. The demands of patients for tooth-colored restorations and the availability of various dental ceramics has driven the increased use of new types of dental ceramic materials. Improved physical properties of theses materials have expanded its use even in posterior crowns and fixed partial dentures. However, ceramic still has limitation such as low loading capability. This is critical for long-span bridge, because bridge is more subject to tensile force. Purpose: The wire reinforced ceramic was designed to increase the fracture resistance of ceramic restoration. The purpose of this study was to evaluate the fracture resistance of wire reinforced ceramic. Material and methods: Heat pressed ceramic(ingot No.200 : IPS Empress 2, Ivoclar Vivadent, Liechtenstein) and Ni-Cr wire(Alfa Aesar, Johnson Matthey Company, USA) of 0.41 mm diameter were used in this study. Five groups of twelve uniform sized ceramic specimens(width 4 mm, thickness 2 mm, length 15 mm) were fabricated. Each group had different wire arrangement. Wireless ceramic was used as control group. The experimental groups were divided according to wire number and position. One, two and three strands of wires were positioned on the longitudinal axis of specimen. In another experimental group, three strands of wires positioned on the longitudinal axis and five strands of wires positioned on the transverse axis. Three-point bending test was done with universal testing machine(Z020, Zwick, Germany) to compare the flexural modulus, flexural strength, strain at fracture and fracture toughness of each group. Fractured ceramic specimens were cross-sectioned with caborundum disc and grinded with sandpaper to observe interface between ceramic and Ni-Cr wire. The interface between ceramic and Ni-Cr wire was analyzed with scanning electron microscope(JSM-6360, JEOL, Japan) under platinum coating. Results: The results obtained were as follows: 1. The average and standard deviation in flexural modulus, flexural strength and fracture toughness showed no statistical differences between control and experimental groups. However, strain was significantly increased in wire inserted ceramics(P<.001). 2. Control group showed wedge fracture aspects across specimen, while experimental groups showed cracks across specimen. 3. Scanning electron microscopic image of cross-sectioned and longitudinally-sectioned specimens showed no gap at the interface between ceramic and Ni-Cr wire. Conclusion: The results of this study showed that wire inserted ceramics have a high strain characteristic. However, wire inserted ceramics was not enough to use at posterior area of mouth in relation to flexural modulus and flexural strength. Therefore, we need further studies.

• Journal of Korean Home Economics Education Association
• /
• v.22 no.1
• /
• pp.51-65
• /
• 2010

The purpose of this study was to raise the awareness of LOHAS(Lifestyle of Health and Sustainability) in the secondary school students. We extracted the related contents to LOHAS from the unit of 'The choice and maintenance of clothing' in the second-year's textbook of Technology-Home Economics, and selected the learning subjects. We also developed the new teaching-learning process plan on practical problem focused lesson, and applied them to the eight classes located in Siheung, Gyeonggi-do, for 5 hours per each class. The learning subjects of the teaching-learning process plan included five items as followings; general awareness, organic fashion, natural fabric, recycled material fashion, and natural dyeing, which were related to LOHAS consumption. The overall topic of the teaching-learning process plan was 'What should do to raise the awareness of LOHAS in order to practice LOHAS consumption in the choice of clothing'. Consequently, the results were abtained as follow; The general awareness of LOHAS as well as the awareness of LOHAS consumption in the choice of clothing increased after classes significantly, compared to those before. Thirty-four materials including worksheets, reading materials and teacher's guide could help to raise the awareness of LOHAS. Also these classes enabled the students to raise their awareness of LOHAS, to improve their opinions and attitudes on LOHAS consumption in the choice of clothing, and to take an interest in the lesson of Home-Economics. This study might have the educational significance in that it made the students directly participate in the national and social trend of the awareness of LOHAS, and upgrade their quality as good LOHAS consumers. Also further teaching-learning process plan in Home-Economics are necessary to promote the awareness of LOHAS for better health, environment, and society.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.6
• /
• pp.857-861
• /
• 2005

The chemical components of different parts of Erigeron annuus were examined in order to use as a new functional food material. Nitrogen free extract contents of flowers, leaves, stems and roots were 53.15, 55.79, 36.71 and $42.61\%$, respectively. The contents of crude fiber in the stems and roots were similar, while those in leaves were lower than those in the flowers. Mineral components of Erigeron annuus were rich in Na $(19.55\~33.78\;mg/100\;g),\;K (49.95\~89.80\;mg/100\;g)\;and\;Ca(25.39\~116.40\;mg/100\;g)$. Among the portions of Erigeron annuus Ca contents was slightly higher level in tile loaves than those of flowers, stems and roots. The major free sugars of Erigeron annuus were sucrose $(0.12\~1.37\%),\;glucose\;(0.68\~1.08\%)\;and\;fructose\;(0.56\~1.66\%)$. The contents of total amino acid in Erigeron annuus were 2,509.74 mg/100 g in the flowers,2,630.95 mg/100 g in the leaves, 889.54 mg/100 g in the stems, and 1,201.41 mg/100 g in leaves. Abundant amino acids in the flowers and leaves were glutamic acid, tyrosine and proline. And abundant amino acids of stems were lysine, glutamic acid and aspartic acid, and its root were lysine, glutamic acid and proline, Organic acid components of Erigeron annuus were succinic acid $(4.78\~19.72\;mg/100\;g),\;tartaric\;acid\;(3.90\~6.91\;mg/100\;g)\;and\;citric\;acid\;(1.79\~6.60\;mg/100\;g)$. Nine fatty acids in Erigeron annuus were identified and the major fatty acids were myristic acid $(18.05\~20.18\%),\;oleic\;acid\;(18.50\~32.91\%)\;and\;linoleic\;acid\;(18.02\~29.87\%)$. Total flavonoid and phenol contents were higher in leaf and flower extracts than any other extracts.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.611-617
• /
• 2010

The current studies aim is to analyze the production cost of walnut tree cultivation and its object was targeted at walnut tree cultivating household region 163. The analysis is as follows. Our domestic walnut tree cultivating households averagely have cultivated about 0.7ha, and planting number per ha was averagely 204, and it showed that compared to the standard planting number (100), the plantation was done close planted. The most cultivar cultivated according to regions were Chungbuk region: sangchon 65.7%, Chungnam region: kwangduk 68.6%, Jeonbuk region: sangchon 98.0%, Gyeongbuk region: daeboo 61.2%. The production cost for cultivating walnuts can be classified into the followings; management cost(4436 thousand won/ha) such as manufacturing cost(292 thousand won/ha), intermediate material cost(3682 thousand won/ha), rent(103 thousand won/ha), employment cost(653 thousand won/ha) etc, and self-serviced expenses such as self-laboring cost(5,834 thousand won/ha), land security cost(490 thousand won/ha), fixed capital cost(834 thousand won/ha), circulating capital cost(234 thousand won/ha) etc. 11,820 thousand won were invested for the production cost of walnut and it made 11,586 thousand won/ha(rate of investment 72.3%) profit, and the net income was 4,196 thousand won/ha(net income rate 26.2%), showing high amount of income. The manufactured walnuts were marketed in Nong-hyup 39.8%, wholesalers 20.8%, dealers 19.8% and recently, as the amount of goods marketed directly to consumers themselves have increased, the income has reached up to 18.9%. At the basis of making most of idle soil, walnut tree's cultivated regions are fairly small, and due to the characteristics of sideline management, it has its limits in searching for production policy locally and promotion strategy of industries. Therefore, if the basic database can be established, subjected only to full-time cultivating households, then not only would the differences between the imported walnuts be reinforced, it would also be possible to transfer into the new and improved distribution system. Furthermore, through establishment of the database, it can be anticipated that it would contribute greatly in the increase of the household income.

• Microbiology and Biotechnology Letters
• /
• v.40 no.3
• /
• pp.237-242
• /
• 2012

In this study, the skin moisturing effect and stability of cream containing L. cuneata G. Don extract (ethyl acetate fraction) were evaluated. The skin hydrating effect of the cream containing extract was 1020% higher than the placebo cream, and the TWEL of the cream containing extracts was decreased to $7.7g/m^2h$ compared to the control ($10.2g/m^2$) and placebo cream ($8.9g/m^2$). The pH, viscosity, and absorbance were measured under the 4, 25, 37, $45^{\circ}C$ and the sun light during the 12 weeks. The pH change between cream containing extract and placebo cream did not show the significant difference under the 4, 25, 37, $45^{\circ}C$ except for the sun light. Both creams showed high decrease (about 59%) of viscosity at $45^{\circ}C$. However, there was no significant change under other conditions. The absorbance of the cream containing the extract and the placebo cream was decreased similarly at all conditions. This decrease in absorbance was relatively small compared to the decrease of absorbance of the extract in ethanol solution under the sun light (Fig. 7). In addition, any change in color or smell of the cream was not observed during the 12 weeks. Also physical changes as creaming and cohesion were not shown. These results indicate that the cream containing L. cuneata extract has the skin moisturizing effect and is relatively stable. Therefore, it is suggested that the ethyl acetate fraction of L. cuneata extract could be applicable to cosmetics as a new cosmetic material with its antioxidative and antibacterial activities reported previously.

• Microbiology and Biotechnology Letters
• /
• v.42 no.2
• /
• pp.170-176
• /
• 2014

In this study, the anti-oxidative and anti-inflammatory activities of Euptelea pleiosperma ethanol extract (EPEE) were evaluated using in vitro assays and cell culture model systems. EPEE possessed a more potent scavenging activity against 1,1-diphenyl-2-picryl hydrazyl than the ascorbic acid used as a positive control. EPEE effectively suppressed lipopolysaccharide (LPS), in addition to hydrogen peroxide induced reactive oxygen species on RAW 264.7 cells. Furthermore, EPEE induced the expression of the anti-oxidative enzyme heme oxygenase 1 (HO-1) and its upstream transcription factor, nuclear factor-E2-related factor 2 (Nrf2), dose and time dependently. The modulation of HO-1 and Nrf2 expression might be regulated by mitogen-activated protein kinases and phosphatidyl inositol 3 kinase/Akt as their upstream signaling pathways. On the other hand, EPEE inhibited LPS induced nitric oxide (NO) formation without cytotoxicity. Suppression of NO formation was the result of the down regulation of inducible NO synthase (iNOS) by EPEE. Suppression of NO and iNOS by EPEE may be modulated by their upstream transcription factor, nuclear factor ${\kappa}B$, and AP-1 pathways. Taken together, these results provide important new insights into E. pleiosperma, namely that it possesses anti-oxidative and anti-inflammatory activities, indicating that it could be utilized as a promising material in the field of nutraceuticals.

• Archives of design research
• /
• v.17 no.1
• /
• pp.89-98
• /
• 2004

A systemic approach to behavior on the basis of human psychology is needed for behavior-centered space design. Also, the recognition that human and environment, in all, have complementarity is needed- human and space shall be understood as a general phenomenon, supposing interaction. Design of behavior-oriented space means configuration and coordination of physical subjects as well as understanding, analysis and reflection of psychological and behavioral phenomena. It is analysis of a private individual as well as understanding of interaction between human groups, as well. In respect of space recognition, analysis not on material movement but on energy circulation and variable is important. It means that the understanding of user's behavior and psychology does not orient reasonable purpose just for convenience. That is, such understanding intends to understand behavioral patterns and psychological phenomena between space and human beyond the decomposition of structure of human and space into physical elements and the design based on standardized data. Thereby, more human-oriented space design might be implemented by the understanding of behavioral essence. Also, a user-centered design process from another viewpoint might be created, and the general amenity among man, space and environment - better environmental quality - might be produced. For this, the consciousness of human activity that is, activity system shall be ahead of it, and the approaches for design shall be implemented into a process not in predictive ideas but in semi-scientific system. On the basis of the above view, this study was attempted to investigate the orientation of design to recognize space as another life, and explore a process where it is drawn into a design language on the basis of human behavior. If the essence of space behavior and the activity system are analyzed through user observation and it is reflected upon a space design program and then developed into a formative language, a new design process on human and environment might be produced. In conclusion, the reflection of user's behavior and psychology into design, contrary to existing public space design based on physical data, can orient quality improvement of human life and ultimately be helpful to the proposition, 'humanization of space'.

• The Korean Journal of Mycology
• /
• v.38 no.2
• /
• pp.130-135
• /
• 2010

To select the viable alternative substrates among the variable organic substrates for productivity enhancement and production cost-reduction of oyster mushroom in bottle culture, this study was carried out at mushroom research institute of GGRDA in 2007. In bottle culture of oyster mushroom (Plerutus ostreatus), the seedcakes of rape (RS), soybean (SS), coconut (CCS), and kapok (KS) were examined as substitute of cotton seedcake which was primary nutritive material of mushroom growing substrate. The chemical properties of substrate mixed with kapok seedcake is similar to the mixture with cotton seedcake in T-C, T-N, C/N ratio, and other nutrients. Mixed growing substrate containing cotton seedcake and kapok seedcake was superior to other mixtures 99.2% and 99.5%, respectively in spawning ratio and was faster mycellium growth in column test than that of soybeen seedcake, cotton + soybeen seedcake, and coconut seedcake. The period required in first pin-heading was 1-2 days longer in rape and soybeen seedcake mixture. Also there wad no primodia and fruitbody formation at soybeen seedcake mixture which had highest T-N content among the other mixed substrates. Yield per bottle and biological efficiency were highest of 144.6 g and 75.4%, respectively at kapok seedcake mixture. As a result, this study found that cotton seedcake can be replaced with kapok seedcake in bottle culture of oyster mushroom.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.30-38
• /
• 2008

Petroleum-based resin adhesives have extensively been used for the production of wood panels. However, with the increase of manufacturing cost and the environmental issue, such as the emission of volatile organic compounds, of the adhesive resins, it is necessary to be developed new adhesive systems. In this study, the potential of okara, which is a residue wasted from the production of tofu, for the development of bio-based adhesives was investigated. At first, the physical and chemical properties of okara were examined. After okara was hydrolyzed in acidic and/or alkaline solutions, okara-based adhesive resins were formulated with the mixtures of the okara hydrolyzates and phenol formaldehyde (PF) prepolymer. The adhesive resins were used for the fabrication of plywood panels, and then the adhesive strength and formaldehyde emission of the plywood panels were measured to examine the applicability of the resin adhesives for the production of plywood panels. The solids content and pH of the okara used in this study were around 20% and weak acidic state, respectively. In the analysis of its chemical composition, the content of carbohydrate was the highest, and followed by protein. The shear strengths of plywood fabricated with okara-based resin adhesives exceeded a minimum requirement of KS standard for ordinary plywood, but its wood failure did not reach the minimum requirement. In addition, the formaldehyde emissions of all plywood panels were higher than that of E1 specified in the KS standard. Based on these results, okara has the potential to be used as a raw material of environmentally friendly adhesive resin systems for the production of wood panels, but further researches - biological hydrolysis of okara and various formulations of PF prepolymer - are required to improve the adhesive strength and formaldehyde emission of okara-based resin adhesives.