• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.26 no.1
• /
• pp.135-170
• /
• 2015

This study aimed to investigate the transition of academic libraries' jobs by developing a model based on a shift of library generations including Library 1.0, Library 2.0, and Library 3.0 corresponding to the shift of web generations and to explore generational characteristics of library duties as well. The research used three phases of procedure: literature review about different library generations; job analyses for academic libraries in South Korea and the U.S.A.; the Delphi technique in tree sequential order. The research findings were as follows. First of all, there were 170 duties that continued from Library 1.0 to Library 3.0. There were 58 duties which continued from Library 2.0 to Library 3.0 whereas three duties that continued from Library 1.0 to Library 2.0. In addition, three distinctive duties existed only in Library 1.0 whereas one unique duty was only in Library 2.0. Library 3.0 generated 25 new duties. Secondly, considering general characteristics which cover specific parts of individual duties, there was a significant increase in importance, difficulty, and frequency of library administration throughout the three generations. In terms of importance, difficulty, and frequency of collection development and management, there was a significant increase only from Library 2.0 to Library 3.0. Considering information organization, there was a significant decrease in importance from Library 1.0 to Library 2.0. In addition, there was a significant decrease in frequency and there was no significant difference in difficulty throughout the three generations. In the case of information service, while there was a significant increase in importance among three generations, there was a significant increase in difficulty only from Library 1.0 to Library 2.0. However, there was no generational difference in frequency. With the respect of information system development and management, there was a significant increase in importance and frequency throughout the three generations, but there was no significant difference in difficulty among three generations.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.15-24
• /
• 2018

Despite the recognition of the need for productivity information and its importance, the feedback of productivity information is not well-established in the construction industry. Effective use of productivity information is required to improve the reliability of construction planning. However, in many cases, on-site productivity information is hardly management effectively, but rather it relies on the experience and/or intuition of project participants. Based on the literature review and expert interviews, the authors recognized that one of the possible solutions is to develop a systematic approach in dealing with productivity information of the construction job-sites. It is required that the new system should not be burdensome to users, purpose-oriented information management, easy-to follow information structure, real-time information feedback, and productivity-related factor recognition. Based on the preliminary investigations, this study proposed a framework for a novel system that facilitate the effective management of construction productivity information. This system has utilized Sketchup software which has good user accessibility by minimizing additional data input and related workload. The proposed system has been designed to input, process, and output the pertinent information through a four-stage process: preparation, input, processing, and output. The inputted construction information is classified into Task Breakdown Structure (TBS) and Material Breakdown Structure (MBS), which are constructed by referring to the contents of the standard specification of building construction, and converted into productivity information. In addition, the converted information is also graphically visualized on the screen, allowing the users to use the productivity information from the job-site. The productivity information management system proposed in this study has been pilot-tested in terms of practical applicability and information availability in the real construction project. Very positive results have been obtained from the usability and the applicability of the system and benefits are expected from the validity test of the system. If the proposed system is used in the planning stage in the construction, the productivity information and the continuous information is accumulated, the expected effectiveness of this study would be conceivably further enhanced.

• KDI Journal of Economic Policy
• /
• v.31 no.2
• /
• pp.127-153
• /
• 2009

There is a growing concern about potential harmful effect of second-hand or environmental tobacco smoking. As a result, smoking bans in workplace become more prevalent worldwide. In Korea, workplace smoking ban policy become more restrictive in 2003 when National health enhancing law was amended. The new law requires all office buildings larger than 3,000 square meters (multi-purpose buildings larger than 2,000 square meters) should be smoke free. Therefore, a lot of indoor office became non smoking area. Previous studies in other counties often found contradicting answers for the effects of workplace smoking ban on smoking behavior. In addition, there was no study in Korea yet that examines the causal impacts of smoking ban on smoking behavior. The situation in Korea might be different from other countries. Using 2001 and 2005 Korea National Health and Nutrition surveys which are representative for population in Korea we try to examine the impacts of law change on current smoker and cigarettes smoked per day. The amended law impacted the whole country at the same time and there was a declining trend in smoking rate even before the legislation update. So, the challenge here is to tease out the true impact only. We compare indoor working occupations which are constrained by the law change with outdoor working occupations which are less impacted. Since the data has been collected before (2001) and after (2005) the law change for treated (indoor working occupations) and control (outdoor working occupations) groups we will use difference in difference method. We restrict our sample to working age (between 20 and 65) since these are the relevant population by the workplace smoking ban policy. We also restrict the sample to indoor occupations (executive or administrative and administrative support) and outdoor occupations (sales and low skilled worker) after dropping unemployed and someone working for military since it is not clear whether these occupations are treated group or control group. This classification was supported when we examined the answers for workplace smoking ban policy existing only in 2005 survey. Sixty eight percent of indoor occupations reported having an office smoking ban policy compared to forty percent of outdoor occupation answering workplace smoking ban policy. The estimated impacts on current smoker are 4.1 percentage point decline and cigarettes per day show statistically significant decline of 2.5 cigarettes per day. Taking into account consumption of average sixteen cigarettes per day among smokers it is sixteen percent decline in smoking rate which is substantial. We tested robustness using the same sample across two surveys and also using tobit model. Our results are robust against both concerns. It is possible that our measure of treated and control group have measurement error which will lead to attenuation bias. However, we are finding statistically significant impacts which might be a lower bound of the true estimates. The magnitude of our finding is not much different from previous finding of significant impacts. For cigarettes per day previous estimates varied from 1.37 to 3.9 and for current smoker it showed between 1%p and 7.8%p.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.98-109
• /
• 2011

Habitat restoration initiative is an important factor for the on-site preservation of butterflies. A new habitat necessitates the investigation of the ecology of the butterfly, the landscape of the habitat, the work process, and a cost analysis. In this study, these factors were analyzed through1) re-consideration of the secured results from three years of field work, and 2) a habitat area estimation conducted according to the presence or absence of larvae and adults via a Parnassius bremeri Bremer survey. The investigation of the natural habitat, done for both larvae and adult butterflies found in South Korea, suggested that multiple patches with a minimum size exceeding $300m^2$ and with an average size of about $1,600m^2$were required for survival of this butterfly. Therefore, more than five patches should be considered for butterfly habitat and patches should have similarity to the present habitat environment with transplantation plans for diet plants and honeydew plants. In addition, to activate the migration of the butterfly, cutting down trees that are obstacles to migration, minimizing the distance between patches and the addition of a stepping patch are also required. A patch connectivity analysis showed that patches should be located within 300m of neighboring patches, as the migration of the butterfly will fail if it is more than 600m. Additionally, more than $10,000m^2$ for a single patch or a patch network composed more than five patches over $1,600m^2$ in size were recommended, with a total patch size of $8,000m^2$. Additionally, neighboring multiple patch networks are more desirable than a single habitat in the event a cyclic habitat pattern arises. In this study, we suggest a habitat restoration and optimal prerequisites for a butterfly habitat. It is expected that this research will lead to the creation of a good model for the restoration of butterfly species.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.1
• /
• pp.1-8
• /
• 2011

In this paper, as a new educational cooperation model, seeking the problems and the directions of progress on GPOE(Gyeonggi Provincial Office of Education)'s innovational education district project, recognizing the various points of issue of SVHS(specialized vocational high schools) faced now, suggesting the contents and standards of the program as measures of enhancing competitiveness of SVHS, analyzing the strengths and weaknesses of project of innovational education district and finding the plans for progress. According to the result of the advanced study and analysis, it shows that the aid as well as the supporting object of helping the SVHS's students find a job don't reach a certain level. As the aid supports across the general elementary and secondary schools, it tends to show much more emotional software-based support required by elementary school, middle school and general high school as universal education welfare rather than hardware-based support required by SVHS. Despite the competent evaluation on the survey about the supporting method from SVHS's parents teachers and students, the survey includes that teachers who ask the balancing support are increasing, some students suspect its effect of education and some parents as a residential position ask the regional growth rather than education So there are a lot of confusions among the teachers, students and parents yet. To overcome these problems, we ensure the internal stability of local education community and GPOE and local government get out large scale constructions with trust and belief to make a revolution of public education in supporting the administrative task and finance and to accomplish the program that best suits our SVHS's state to be supported without dividing educational software and hardware, should reflect the demand of field by for expert group being built and attended when build the local revolution community. Also plan to make full use of local human and property infrastructure should be added. To this end, as programs to build a pool of guest lecturers are provided to teachers who carry out innovative education programs, we seek the reformations to give students opportunities to widen participation in other school programs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• Interdisciplinary Bio Central
• /
• v.1 no.1
• /
• pp.3.1-3.6
• /
• 2009

Introduction: GTPases known as translation factor play a vital role as ribosomal subunit assembly chaperone. The bacterial Obg proteins ($Spo{\underline{0B}}$-associated ${\underline{G}}TP$-binding protein) belong to the subfamily of P-loop GTPase proteins and now it is considered as one of the new target for antibacterial drug. The majority of bacterial Obgs have been commonly found to be associated with ribosome, implying that these proteins may play a fundamental role in ribosome assembly or maturation. In addition, one of the experimental evidences suggested that Bacillus subtilis Obg (BsObg) protein binds to the L13 ribosomal protein (BsL13) which is known to be one of the early assembly proteins of the 50S ribosomal subunit in Escherichia coli. In order to investigate binding mode between the BsObg and the BsL13, protein-protein docking simulation was carried out after generating 3D structure of the BsL13 structure using homology modeling method. Materials and Methods: Homology model structure of BsL13 was generated using the EcL13 crystal structure as a template. Protein-protein docking of BsObg protein with ribosomal protein BsL13 was performed by DOT, a macro-molecular docking software, in order to predict a reasonable binding mode. The solvated energy minimization calculation of the docked conformation was carried out to refine the structure. Results and Discussion: The possible binding conformation of BsL13 along with activated Obg fold in BsObg was predicted by computational docking study. The final structure is obtained from the solvated energy minimization. From the analysis, three important H-bond interactions between the Obg fold and the L13 were detected: Obg:Tyr27-L13:Glu32, Obg:Asn76-L13:Glu139, and Obg:Ala136-L13:Glu142. The interaction between the BsObg and BsL13 structures were also analyzed by electrostatic potential calculations to examine the interface surfaces. From the results, the key residues for hydrogen bonding and hydrophobic interaction between the two proteins were predicted. Conclusion and Prospects: In this study, we have focused on the binding mode of the BsObg protein with the ribosomal BsL13 protein. The interaction between the activated Obg and target protein was investigated with protein-protein docking calculations. The binding pattern can be further used as a base for structure-based drug design to find a novel antibacterial drug.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.1
• /
• pp.209-224
• /
• 2020

This study started from the question of whether the preference of corporate recruitment can be achieved without any difference between the start-up experiencer and the general job seekers. Therefore, the purpose of the study is to identify the factors related to start-ups that affect the preference of job seekers for companies, and to analyze the differences in the factors related to start-ups between general job seekers and job seekers with start-up experience. Third, it is to see the difference in the preference for employment between job seekers with start-up experiences and general job seekers. The independent variables of the research model were entrepreneurship, motivation for start-up (job search), and characteristics of the job seekers (founder). The dependent variables were job preference, and the moderating variables were presented as job seekers' classification (job seekers with start-up experience vs. general job seekers). The subjects of the study were personnel managers of 100 companies with more than 5 years of establishment and 100 new companies with less than 5 years of establishment. The questionnaire was distributed in two types, and 189 respondents, including 101 job seekers with start-up experiences and 88 general job seekers, were finally used for analysis. The results of the study were as follows. First, as a result of multiple regression analysis on both experienced start-up experiencers and general job seekers, only entrepreneurship had an effect on preference for recruitment. Second, the moderating effect of job seekers' classification was found only in the relationship between motivation for start-up and preference for employment. Third, the result of multiple regression analysis based on the start-up experiencers showed that the relationship between the motivation for start-up, the preference for recruitment, the characteristics of founders and the preference for recruitment was statistically significant. On the other hand, the characteristics of the founder and the preference for employment were rejected. Fourth, the results of the study based on general job seekers showed that the motivation for job search decreased the preference for employment. The study did not provide the results of differences in recognition between different industries, traditional enterprises and venture businesses due to the limitation of small examples. There is no clear definition of start-up experiencers either. However, it is meaningful to suggest the implications of what preparations should be made when the start-up experiencers close their start-ups and turn their career into employment and to help them to accurately recognize the importance of entrepreneurship. It also provides the preference of the general job seekers for the company, the preparation for successful employment, and the implications for the direction of the future start-up revitalization.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.605-615
• /
• 2012

Dance studies inherently have a nature of convergence and integration. Meanwhile, dance studies have extended their realm by investigating dance phenomena from many perspectives which art theories cannot explain. However, the previous and current dance studies are inadequate to explain a confluence society which is characterized as techuim, Interaction, freedom and openness according to the digital revolution. Hence, a result of research trend in domestic dance studies, it is found that dance studies have been studied in four perspectives since the early 2000s: first, a triggering the various studiesa of the convergent and integrative dance; second, an attempt to the convergent and integrative program development research; third, the vitalization of the convergent research on dance digital contents; and fourth, a research on the convergent dance art phenomena. These researches have played an important role in boosting a change in the structure and realm expansion of dance studies that are interdisciplinary research enabling a holistic approach to the integration and convergence between scientific technique, skills of dance art and other studies. However, it should be acknowledged that one problem is the current research development plan or/and research program have very little feasibility and practicality except an interdisciplinary research on the dance digital contents. Therefore, it is suggested for the development of dance studies in the age of convergence as follows: first, a dance convergent study integrated in skills and theories of dance and science that would pave the way for an academic foundation leading to a new humanistic model in the age of convergent; and second, a need for a paradigm shift that theories should be deployed in the scene on a commercial scale in order to produce effectiveness of the interdisciplinary and integrative research on dance studies by turning into a behavioristic research phase. third, it needs to changeover from large scale of convergent performance into small scale of convergent performance based on original idea for accumulation of teachnique research and promotion of dance convergent performance.

• Journal of the Korean Society of Radiology
• /
• v.6 no.2
• /
• pp.93-98
• /
• 2012

Micro-computed tomography (microCT) is an important tool for preclinical vascular imaging, with micron-level resolution. This non-destructive means of imaging allows for rapid collection of 2D and 3D reconstructions to visualize specimens prior to destructive analysis such as pathological analysis. Objectives. The aim of this study was to suggest a method for ex vivo, postmortem examination of stented arterial segments with microCT. And ex vivo evaluation of stents such as bare metal or drug eluting stents on in-stent restenosis (ISR) in rabbit model was performed. The bare metal stent (BMS) and drug eluting stent (DES, paclitaxel) were implanted in the left or right iliac arteries alternatively in eight New Zealand white rabbits. After 4 weeks of post-implantation, the part of iliac arteries surrounding the stent were removed carefully and processed for microCT. Prior to microCT analysis, a contrast medium was loaded to lumen of stents. All samples were subjected to an X-ray source operating at 50 kV and 200 ${\mu}A$ by using a 3D isotropic resolution. The region of interest was traced and measured by CTAN analytical software. Objects being exposed to radiation had different Hounsfield unit each other with values of approximately 1.2 at stent area, 0.12 ~ 0.17 at a contrast medium and 0 ~ 0.06 at outer area of stent. Based on above, further analyses were performed. As a result, the difference of lengths and volumes between expanded stents, which may relate to injury score in pathological analysis, was not different significantly. Moreover, ISR area of BMS was 1.6 times higher than that of DES, indicating that paclitaxel has inhibitory effect on cell proliferation and prevent infiltration of restenosis into lumen of stent. And ISR area of BMS was higher ($1.52{\pm}0.48mm^2$) than that of DES ($0.94{\pm}0.42mm^2$), indicating that paclitaxel has inhibitory effect on cell proliferation and prevent infiltration of restenosis into lumen of stent. Though it was not statistically significant, it showed that the extent of neointema of mid-region of stents was relatively higher than that of anterior and posterior region in parts of BMS as showing cross-sectional 2-D image. suggest that microCT can be utilized as an accessorial tool for pathological analysis.