• The KSFM Journal of Fluid Machinery
• /
• v.3 no.3 s.8
• /
• pp.19-24
• /
• 2000

It is well known that the finite element analysis often has an inaccuracy when it is in conflict with test results. Model updating is concerned with the correction of analytical model by processing records of response from test results. The famous one of the model updating methods is FRF sensitivity method. However, it has demerit that the solution is not unique. So, the neural network is recommended when an unique and exact solution is desired. The generalization ability of radial basis function neural network is used in model updating. As an application model, a cantilever and a rotor system are used. Specially the machined clearance($C_p$) of a journal bearing is updated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.406-409
• /
• 2000

We propose the modified neural network which are paralleled to control nonlinear systems. The proposed method is a direct control method to use inverse model of the plant. Nonlinear systems are divided into two parts; linear part and nonlinear part, and it is controlled by RLS method and recursive multi-layer neural network with each other. We simulate to verify the performance of the proposed method and are compared with conventional direct neural network control method. The proposed control method is improved the control performance than the conventional method.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.162-167
• /
• 2012

This paper proposes a speech processing system based on a model of the human auditory system and a noise reduction neural network with fast Fourier transform (FFT) amplitude and phase spectrums for noise reduction under background noise environments. The proposed system reduces noise signals by using the proposed neural network based on FFT amplitude spectrums and phase spectrums, then implements auditory processing frame by frame after detecting voiced and transitional sections for each frame. The results of the proposed system are compared with the results of a conventional spectral subtraction method and minimum mean-square error log-spectral amplitude estimator at different noise levels. The effectiveness of the proposed system is experimentally confirmed based on measuring the signal-to-noise ratio (SNR). In this experiment, the maximal improvement in the output SNR values with the proposed method is approximately 11.5 dB better for car noise, and 11.0 dB better for street noise, when compared with a conventional spectral subtraction method.

• Journal of information and communication convergence engineering
• /
• v.16 no.3
• /
• pp.160-165
• /
• 2018

This paper designed and developed the image processing system of integrating feature extraction and matching by using convolutional neural network (CNN), rather than relying on the simple method of processing feature extraction and matching separately in the image processing of conventional image recognition system. To implement it, the proposed system enables CNN to operate and analyze the performance of conventional image processing system. This system extracts the features of an image using CNN and then learns them by the neural network. The proposed system showed 84% accuracy of recognition. The proposed system is a model of recognizing learned images by deep learning. Therefore, it can run in batch and work easily under any platform (including embedded platform) that can read all kinds of files anytime. Also, it does not require the implementing of feature extraction algorithm and matching algorithm therefore it can save time and it is efficient. As a result, it can be widely used as an image recognition program.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.186-190
• /
• 1989

A Study for Bad Data Processing in state estimation by a Neural Network is presented. State estimation is the process of assigning a value to an unknown system state variable based on measurement from that system according to some criteria. In this case, the ability to detect and identify bad measurements is extremely valuable, and much time in oder to achieve the state estimation is needed. This paper proposed new bad data processing using Neural Network in order to settle it. The concept of neural net is a parallel distributed processing. In this paper, EBP (Error Back Propagation) algorithm based on three layered feed forward network is used.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.10
• /
• pp.690-696
• /
• 2004

This paper is proposed a hybrid intelligent controller based on the vector controlled surface permanent magnet synchronous motor(SPMSM) drive system. The hybrid combination of neural network and fuzzy control will produce a powerful representation flexibility and numerical processing capability. Also, this paper is proposed speed control of SPMSM using neural network-fuzzy(NNF) control and speed estimation using artificial neural network(ANN) Controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The error between the desired state variable and the actual one is back-propagated to adjust the rotor speed, so that the actual state variable will coincide with the desired one. The back propagation mechanism is easy to derive and the estimated speed tracks precisely the actual motor speed. This paper is proposed the theoretical analysis as well as the simulation results to verify the effectiveness of the new method.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.459-460
• /
• 2001

In this paper, we analyze algorithms for diagnosing of VEP(visual evoked potential) signal. We used wavelet transform for the preprocessing of VEP signal data and back propagation neural network for the pattern recognition. We used several wavelets to study their effects and efficiency in the preprocessing of VEP. The diagnosis system led to good results. We obtained the noise reduced and compressed signal with the wavelet transform of the training VEP signal. So it is possible to train the neural network faster and exact diagnosis processing is possible in the neural network. From the experimental results, we know that the discrimination ability of the neural network is changed by the type of basis vector and the proposed system is good to the diagnosis of VEP.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.49-51
• /
• 2003

This paper presents a speed control system of induction motor using neural network. The speed control of induction motor was designed to NNC(Neural Network Controller) and NNE(Neural Network Estimator) used backpropagation, the NNE was constituted to be get an error value of output of an induction motor and conspire an input/output. NNC is controled to be made the error of reference speed and actual speed decrease, and in order to determine the weighting of NNC can be back propagated through the NNE, and it is adapted to the outside circumstances and system characters with learning ability.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.635-641
• /
• 2016

In many industrial applications that use the electric motors robust controllers are needed. The method using a neural network in order to design a robust controller when a disturbance occurs is studied. Backpropagation algorithm, which is used in a conventional neural network controller is used in many areas, but when the number of neurons in the input layer, hidden layer and output layer of the neural network increases the processing speed of the learning process is slow. In this paper an adaptive PI(Proportional and Integral) controller based on CTRNN(Continuous Time Recurrent Neural Network) for permanent magnet synchronous motors is presented. By varying the load and the speed the validity of the proposed method is verified through simulation and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.169.2-169
• /
• 2001

In this paper, we propose the face recognition system using the neural network. A difficult procedure in constructing the entire recognition systems is the feature extraction from the face imga. And a key poing is the design of the matching function that relates the set of feature values to the appropriate face candidates. We use the length and angle values as feature values that are extracted from the face image normalized to the range of [0,1]. These features values are applied to the input layer of the neural network. Then, these multi-layered perceptron learns or gives otput result. By using the neural network we need not to design the matching function. This function may have nonlinear attributes considerably and would be ...