• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.166-171
• /
• 2003

This paper presents the algorithms and Matlab Toolbox for co-simulation of distributed real-time control system based on OSEK-OS and CAN protocol. This toolbox enables the developers to analyze the timing uncertainty, which is caused by resource sharing including shared memories and networks, and to take the timing uncertainty into consideration in the early design phase. Furthermore, this toolbox helps the developers to model the behaviors of a control system by providing graphical user interface for objects of OSEK-OS and CAN. To prove the feasibility of this toolbox, a vehicle body network system is modeled with this toolbox, and the timing uncertainties are analyzed.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1650-1657
• /
• 2017

In this study, the distributed secondary voltage control of islanded microgrids with multi-agent consensus algorithm is investigated. As an alternative to a time-triggered approach, an event-triggered scheme is proposed to reduce the communication load among inverter-based distributed generators (DGs). The proposed aperiodic control scheme reduced unnecessary utilization of limited network bandwidth without degrading control performance. By properly establishing a distributed triggering condition in DG local controller, each inverter is only required to send voltage information when its own event occurs. The compensation of voltage amplitude deviation can be realized, and redundant data exchange related to fixed high sampling rate can be avoided. Therefore, an efficient use of communication infrastructure can be realized, particularly when the system is operating in steady state. The effectiveness of the proposed scheme is verified by simulations on a microgrid test system.

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.103-108
• /
• 2021

The emergence of new technologies and their implementation by different manufacturers of electronic devices are experiencing an ascending trend. Most of the time, these protocols are expected to reach a certain degree of maturity, and electronic equipment manufacturers use simplified communication standards and interfaces that have already reached maturity in terms of their development such as ModBUS, KNX or CAN. This paper proposes an IoT solution of the Smart Home type based on an Analysis and Prediction System. A data acquisition component was implemented and there was defined an algorithm for the analysis and prediction of actions based on the values collected from the data update component and the data logger records.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.125-130
• /
• 2015

In this paper, a command and control (C2) system development using a network emulator is treated. Due to the development of information and communication technologies enabling reinforcement of information exchange and computational capability, an operational concept network centric warfare (NCW) was introduced. In here, it summarizes a developmental test environment build based on dummynet, one of the software based network emulator, and an operational concept of target command and control system. Moreover, I explain command and control system developmental test cases and results, and suggest an operational concept to overcome limitations of target communication system. I expect this concept will reduce data traffic of proposed C2 system especially plot messages which is distributed same data with short interval.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.25-30
• /
• 2017

Arago's disk system consists of a speed controller of the DC motor (inner loop controller) and a position controller of the magnetic bar angle (main controller), which are implemented by the design of the PI and PID controller, respectively. First, we analyzed the nonlinear characteristics of the Arago disk system and found the operating point range of three locations as a result. In this paper, a gain scheduler method was applied to guarantee a constant control performance in the range of $0{\sim}130^{\circ}C$, and a structure to change the controller according to the control reference value based on the previously obtained operating points was experimentally implemented. The Distributed Control Systems (DCS) configuration using the Controller Area Network (CAN) was used to verify the proposed method by improving the operational efficiency of the entire experimental system. So, simplicity of the circuit and easy diagnosis were achieved through a single CAN bus communication.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.688-695
• /
• 2013

Networked Control Systems(NCS) contain the structure which controllers, actuators and sensors are connected to communication network. And they have been adopted in large and complicated plant area due to the advantages of mitigating computational bottleneck and maintenance. Although this structure provides many benefits, it brings in problems of unpredictable communication delay, data loss and corruption. This phenomena have to be considered in designing NCSs since it affects on overall control system stability. This paper introduces network traffic test method for ethernet based NCSs to find out maximum network usage which guarantee stable control operation. Test results shows this methods can be adopted in various types of NCSs and contributes economical system design and effective system operation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.38-45
• /
• 2016

For higher efficiency and reliability of railroad trains with many electronic sensors and actuators, a distributed control system with which electronic components communicate with each other in a distributed manner via a data network is considered. This paper considers Ethernet-based Train Communication Network (TCN) for this purpose and proposes a methodology to optimize the topology in terms of transmission latency and reliability, each of which is modeled as the number of traversing backbone nodes and the number of cables between vehicles, respectively. An objective function is derived accordingly and a closed-form optimum is obtained by relaxing the integer constraint of the number of vehicles for a unit network. Then, the final integer optimum is searched around it. Through numerical evaluation, the validity of the proposed methodology and the characteristics of the resulting solutions are shown.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.993-996
• /
• 1993

This paper addresses the structure and its associated learning algorithms of a feedforward multi-layered connectionist network, which has distributed learning abilities, for realizing the basic elements and functions of a traditional fuzzy logic controller. The proposed neural-network-based fuzzy logic control system (NN-FLCS) can be contrasted with the traditional fuzzy logic control system in their network structure and learning ability. An on-line supervised structure/parameter learning algorithm dynamic learning algorithm can find proper fuzzy logic rules, membership functions, and the size of output fuzzy partitions simultaneously. Next, a Reinforcement Neural-Network-Based Fuzzy Logic Control System (RNN-FLCS) is proposed which consists of two closely integrated Neural-Network-Based Fuzzy Logic Controllers (NN-FLCS) for solving various reinforcement learning problems in fuzzy logic systems. One NN-FLC functions as a fuzzy predictor and the other as a fuzzy controller. As ociated with the proposed RNN-FLCS is the reinforcement structure/parameter learning algorithm which dynamically determines the proper network size, connections, and parameters of the RNN-FLCS through an external reinforcement signal. Furthermore, learning can proceed even in the period without any external reinforcement feedback.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.3
• /
• pp.209-219
• /
• 1996

Fieldbus provides a real-time data communication among field devices in the process control and manufacturing automation systems. In this paper, a Petri Net model of the 1993 draft of IEC/ISA fieldbus which is proposed as an international standard of fieldbus network is developed. Based on the Petri Net model, discrete-event simulation model of IEC/ISA fieldbus network is developed. This paper evaluates the network induced delay in the data link layer of IEC/ISA fieldbus using the simulation model. In addition, an integrated discrete-event/continuous-time simulation model of fieldbus system and distributed control system is developed. This paper investigates the real-time data processing capability of IEC/ISA fieldbus and the effect of network-induced delay to the performance of control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1051-1055
• /
• 2003

Policies are collections of general principles specifying the desired behavior and state of a system. Network management is mainly carried out by following policies about the behavior of the resources in the network. Policy-based (PB) network management supports to manage distributed system in a flexible and dynamic way. This paper focuses on configuration management based on Internet Engineering Task Force (IETF) standards. Network security approaches include the usage of intrusion detection system to detect the intrusion, building firewall to protect the internal systems and network. This paper presents how the policy-based framework is collaborated among the network security systems (intrusion detection system, firewall) and intrusion detection systems are cooperated to detect the intrusions.