• KIISE Transactions on Computing Practices
• /
• v.23 no.12
• /
• pp.670-676
• /
• 2017

Naval combat systems use real-time processing and compositing of collected information to provide the optimal combat capabilities that maximize survival and ensure mission effectiveness. The software for a combat system has dozens to thousands of components depending on the size of the system, and the communication between the components is achieved via DDS. Although the message interface of the combat system is managed through MDMS, an increase in the system size can result in problems such as the deterioration of the development efficiency. In this paper, we implement XMDMS to operate a distributed processing environment and then solve the problem of the reduction in the development efficiency caused by a load at the server. The experimental results shows that XMDMS improves the processing delay and network performance compared to MDMS.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.1-12
• /
• 2006

In this paper we propose an efficient mobile multimedia communication protocol, mobile terminal software platform and mobile VoIP application for IP-based convergence networks. The Proposed mobile multimedia communication protocol is called as ST-MRSVP (Split tunnel based Mobile Resource reServation Protocol) which integrates split tunnel based Mobile IP and RSVP in order to support hish speed mobility. Since mobile terminal platform supports QoS (Qualify of Service) with keeping seamless mobility, mobile QoS supporting modules are developed and interworked together by means of shared memory mechanism. Testbed is composed of a core-network embedding the proposed protocols and wireless LAN-based access networks. We verify functionality and performance of the proposed techniques by using various mobility test over the testbed. As a result, the proposed architecture can reduce the handover delay time with QoS support under 30% comparing with the standard mechanisms and support voice quality as good as CDMA phone.

• Journal of Korea Multimedia Society
• /
• v.8 no.7
• /
• pp.1012-1021
• /
• 2005

This paper describes the design and implementation of an efficient multi-point multimedia conference system using IP grouping. Existing multi-point multimedia conference systems are difficult for multi-user to perform efficient cooperation due to bandwidth limitation for data transmission of video, audio and documentation. In the case that multi-user uses limited bandwidth, smooth cooperation does not accomplish due to transmission delay for the real-time transmission of image and speech data. A hybrid transfer method which is mixed with distributed and centralized methods is used for smooth cooperation, and the network bandwidth is reduced by forming multi-user conference systems of IP grouping in this paper. Also, adaptive image frame variations are used to solve bottleneck effect according to the number of users. An efficient multi-user conference system is designed to support audio quality.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.97-104
• /
• 2001

In this paper, we present a new hierarchical model for performance analysis of channel allocation and packet service protocol in wireless n network. The proposed hierarchical model consists of two parts : upper and lower layer models. The upper layer model is the structure state model representing the state of the channel allocation and call service. The lower layer model, which captures the performance of the system within a given structure state, is the wireless packet retransmission protocol model. These models are developed using SRN which is an modeling tool. SRN, an extension of stochastic Petri net, provides compact modeling facilities for system analysis. To get the performance index, appropriate reward rates are assigned to its SRN. Fixed point iteration is used to determine the model parameters that are not available directly as input. That is, the call service time of the upper model can be obtained by packet delay in the lower model, and the packet generation rates of the lower model come from call generation rates of the upper model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.537-548
• /
• 2000

ATM is the effective information transmission method which multiply statistical and can accept effective the traffic of the various transmission rate. However, it can happen excessive cell loss probability and cell delay when it have temporarily overload. Therefore, it is required the effective traffic control and network resource management for which guarantee QoS(Quality of Service) in terms of users and bandwidth utilization maximization in terms of networks. In this paper, we proposed POBP(PushOut BP) scheme which mixed pushout scheme with BP(Back Pressure), reactive control scheme recommended at the ATM Forum, to guarantee QoS in two stages ATM switch networks. In proposed method, we have to understand exactly using bandwidth information in real-time and become traffic shaping. Thorough these processes, we can not only use effectively unused bandwidth, but also guarantee the fair bandwidth utilization and then can improve cell-loss possibility happened by congestion states in two stage ATM networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1320-1326
• /
• 2017

Recently, IoT has been studying a lightweight protocol to satisfy device communication in a limited network environment. MQTT is a typical lightweight protocol. It supports small fixed headers to minimize overhead, and adopts publish/subscribe structure to guarantee real-time performance. However, MQTT does not support prioritization of important data and can not provide QoS in a specific IoT service. In this paper, we propose a message processing method to consider the priority of various IoT services in MQTT. In the proposed method, the priority flag is added to the fixed header of the MQTT in the node to transmit the message, and the broker confirms the priority of the corresponding message and processes it preferentially. Through experiment and evaluation, we confirmed the reduction of end-to-end delay between nodes according to priority.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.531-538
• /
• 2008

With the dynamic and mobile nature of ad hoc networks, links may fail due to topology changes. So, a major challenge in ad hoc network is dynamically to search paths from a source to destination with an efficient routing method, which is an important issue for delay-sensitive real-time application. The main concerns of graph theory in communications are finding connectivity and searching paths using given nodes. A topology of the nodes in ad hoc networks can be modeled as an adjacency matrix. In this paper, based on this adjacency matrix, we propose new path search algorithms using a sequence of matrix calculation. The proposed algorithms can search paths from a destination to a source using connectivity matrix. Two matrix-based algorithms for two different purposes are proposed. Matrix-Based Backward Path Search(MBBS) algorithm is designed for shortest path discovery and Matrix-Based Backward Multipath Search(MBBMS) algorithm is for multipath search.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.703-712
• /
• 2015

This paper proposes the UIGRP, which can tackle the problem of the network disconnection and packet transmission delay caused by turning vehicles frequently in an urban intersection. The UIGRP was designed as follows. First, it calculates the direction of vehicles using the moving direction of vehicles and the location of a destination. Second, it makes the RSU measure the density of an urban intersection. Third, the TGF Algorithm in the UIGRP decides the data transmission paths by setting as an intermediate node, not only the vehicle that is moving in the direction where a destination node is located, but also the node that has the highest density. The TGF algorithm using a moving direction and density minimizes or removes the occurrence of local maximum problems that the existing Greedy Forwarding algorithm has. Therefore, the simulation result shows that UIGRP decreases the occurrence of local maximum problems by 3 and 1 times, and the packet transmission time by 6.12 and 2.04(ms), and increases the success rate of packet transmission by 15 and 3%, compared to the existing GPSR and GPUR.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.7
• /
• pp.2389-2413
• /
• 2015

High data rates in long-term evolution (LTE) networks can affect the mobility of networks and their performance. The speed and motion of user equipment (UE) can compromise seamless connectivity. However, a proper handover (HO) decision can maintain quality of service (QoS) and increase system throughput. While this may lead to an increase in complexity and operational costs, self-optimization can enhance network performance by improving resource utilization and user experience and by reducing operational and capital expenditure. In this study, we propose the self-optimization of HO parameters based on fuzzy logic control (FLC) and multiple preparation (MP), which we name FuzAMP. Fuzzy logic control can be used to control self-optimized HO parameters, such as the HO margin and time-to-trigger (TTT) based on multiple criteria, viz HO ping pong (HOPP), HO failure (HOF) and UE speeds. A MP approach is adopted to overcome the hard HO (HHO) drawbacks, such as the large delay and unreliable procedures caused by the break-before-make process. The results of this study show that the proposed method significantly reduces HOF, HOPP, and packet loss ratio (PLR) at various UE speeds compared to the HHO and the enhanced weighted performance HO parameter optimization (EWPHPO) algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.221-229
• /
• 2007

In this paper, we propose and analyze the optimized sleep mode for a mobile node (MN) in IEEE 802.16e wireless metropolitan area networks. Because a MN in a sleep mode specified in 802.16e specification should maintain state information with the base station currently attached, it must renew sleep state with a new base station after handover which leads to unnecessary waste of battery power. Noting that the mobility pattern of a MN is independent of call arrival patterns, we propose an optimized sleep mode to eliminate unnecessary standby period of a MN in sleep state after handover. We also propose an analytical model for the proposed scheme in terms of power consumption and the initial call response time. Simulation studies that compare the performance between the sleep mode and the optimized sleep mode show that our scheme marginally increases initial call response delay with the huge reduction in power consumption.