• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.799-804
• /
• 2016

Broadband powerline communication (BPLC) uses distribution lines as a medium for achieving effective bidirectional data communication along with electric current flow. As the material characteristics of power lines are not good at the communication channel, the development of power line communication (PLC) systems for internet, voice, and data services requires measurement-based models of the transfer characteristics of the network suitable for performance analysis by simulation. In this paper, an analytic model describing a complex transfer function is presented to obtain the attenuation and path parameters for a multipath power line model. The calculated results demonstrated frequency-selective fading in multipath channels and signal attenuation with frequency, and were in good agreement with the experimental results. Inductive coupling units are used as couplers for coupling the signal to the power line to avoid physical connections to the distribution line. The inductance of the ferrite core, which depends on the frequency, determines the cut-off frequency of the inductive coupler. Coupling loss can be minimized by increasing the number of windings around the coupler. Coupling efficiency was improved by more than 6 dB with three windings compared to the results obtained with one winding.

• Investigative Magnetic Resonance Imaging
• /
• v.17 no.3
• /
• pp.169-180
• /
• 2013

Purpose : The purpose of this study was to setup a concuurent transcranial magnetic stimulation (TMS)-functional MRI (fMRI) system for understanding causality of the functional brain network. Materials and Methods: We manufactured a TMS coil holder using nonmagnetic polyether ether ketone (PEEK). We simulated magnetic field distributions in the MR scanner according to TMS coil positions and angles. To minimize image distortions caused by TMS application, we controlled fMRI acquisition and TMS sequences to trigger TMS during inter-volume intervals. Results: Simulation showed that the magnetic field below the center of the coil was dramatically decreased with distance. Through the MR phantom study, we confirmed that TMS application around inter-volume acquisition time = 100 miliseconds reduced imaging distortion. Finally, the applicability of the concurrent TMS-fMRI was tested in preliminary studies with a healthy subject conducting a motor task within TMS-fMRI and passive motor movement induced by TMS in fMRI. Conclusion: In this study, we confirmed that the developed system allows use of TMS inside an fMRI system, which would contribute to the research of brain activation changes and causality in brain connectivity.

• Geophysics and Geophysical Exploration
• /
• v.19 no.3
• /
• pp.111-120
• /
• 2016

In order to enhance the connectivity of fracture network as fluid path in enhanced/engineered geothermal system (EGS), the exact locating of hydraulic fractured zone is very important. Hydraulic fractures can be tracked by locating of microseismic events which are occurred during hydraulic fracture stimulation at each stage. However, since the subsurface velocity is changed due to hydraulic fracturing at each stage, in order to find out the exact location of microseismic events, we have to consider the velocity change due to hydraulic fracturing at previous stage when we perform the mapping of microseimic events at the next stage. In this study, we have modified 3D locating algorithm of microseismic data which was developed by Kim et al. (2015) and have developed 3D velocity update algorithm using occurred microseismic data. Eikonal equation which can efficiently calculate traveltime for complex velocity model at anywhere without shadow zone is used as forward engine in our inversion. Computational cost is dramatically reduced by using Fresnel volume approach to construct Jacobian matrix in velocity inversion. Through the numerical test which simulates the geothermal survey geometry, we demonstrated that the initial velocity model was updated by using microseismic data. In addition, we confirmed that relocation results of microseismic events by using updated velocity model became closer to true locations.

• Korean Journal of Plant Taxonomy
• /
• v.40 no.1
• /
• pp.1-15
• /
• 2010

Recognizing a basal group in a taxon is one of the most important factors involved in understanding the evolutionary history of that group of life. Many botanists have suggested a sister to all other angiosperms to understand the origin and rapid diversification of angiosperms based on morphological and fossil evidence. Recent technical advances in molecular biology and the accumulation of molecular phylogenetic data have provided evidence of the extant basal-most angiosperm which is a sister to all other angiosperms. Although it is still arguable, most plant taxonomists agree that Amborella trichopoda Baill., a species (monotypic genus and monotypic family) distributed in New Caledonia, is a sister to all other extant angiosperms based on evidence from the following molecular approaches: 1) classical phylogenetic analyses based on multiple genes (or DNA regions), 2) analyses of a tree network of duplicated gene families, and 3) gene-structural evidence. As an alternative hypothesis with relatively minor evidence, some researchers have also suggested that Amborella and Nymphaeaceae form a clade that is a sister to all other angiosperms. Debate regarding the basal-most angiosperms is still ongoing and is currently one of the hot issues in plant evolutionary biology. We expect that sequencing of the whole genome of Amborella as an evolutionary model plant and subsequent studies based on this genome sequence will provide information regarding the origin and rapid diversification of angiosperms, which is Darwin's so called abominable mystery.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.196-208
• /
• 2009

Sophisticated polymeric materials with 'responsive' properties are beginning to reach the market. The use of reversible, noncovalent interactions is a recurring design principle for responsive materials. Recently developed hydrogen-bonding units allow this design principle to be taken to its extreme. Supramolecular polymers, where hydrogen bonds are the only force keeping the monomers together, form materials whose (mechanical) properties respond strongly to a change in temperature or solvent. In this review, we describe some examples of hydrogen-bonded supramolecular polymers that can be utilized for self-healing materials. Synthesis of a rubber-like material that can be recycled might not seem exciting. But one that can also repeatedly repair itself at room temperature, without adhesives, really stretches the imagination. Autonomic healing materials respond without external intervention to environmental stimuli in a nonlinear and productive fashion, and have great potential for advanced engineering systems.

• Journal of Service Research and Studies
• /
• v.5 no.2
• /
• pp.15-24
• /
• 2015

The trade balance for the information and communications technology (ICT) industries in 2014 have reached 863 hundred million dollars as the main export products such as smart phone and semi-conductor increase, since the ICT industries have played an important role in economic growth in Korea. Until now, the consistent supporting of government and investment of company have been doing with the growth of ICT industries, as a result, Korea marked as the first in the UN electronic government preparing index, and rank 12 in the network preparing index through the policy of national information and basic plan of inter-industry convergence. However, as the unstable international economic circumstances, ICT industries is faced with the stagnation, and then preemptive development of products and services for ICT convergence industries is needed to continually get definite ICT Korea image. In this paper, the ICT convergence industry is analyzed and forecasted. In specific, the international and domestic market for cloud, 3D convergence, and internet of things is diagnosed. The market for ICT convergence industries is predicted to be 3.6 trillion dollar in the world, and 110 trillion won in domestic. From the analytical results for technology and services development, the preemptive supporting of the technology development and policy for the internet of things and 3D convergence industries is required. In addition to, through the future forecasting by socio-tech matrix method, the policy supporting for the ICT convergence area of healthcare, fintech, artificial intelligence, body platform, and human security is needed.

• The Journal of Bigdata
• /
• v.1 no.1
• /
• pp.67-75
• /
• 2016

The study analyzed big data extracted from Google and social media to identify factors related to searches on cyber bullying in Korea and America. Korea's cyber bullying analysis was conducted social big data collected from online news sites, blogs, $caf{\acute{e}}s$, social network services and message for between January 1, 2011 and March 31, 2013. Google search trends for the search words of stress, exercise, drinking, and cyber bullying were obtained for January 1, 2004 and December 22, 2013. The main results of this study were as follows: first, the significant factors stress were cyber bullying that Korea more than America. Secondly, a positive relationship was found between stress and drinking, exercise and cyber bullying both Korea and America. Thirdly, significant differences were found all path both Korea and America. The study shows that both adults and teenagers are influenced in Korea. We need to develop online application that if cyber bullying behavior was predicted can intervene in real time because these actual cyber bullying-related exposure to psychological and behavioral characteristic.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.297-304
• /
• 2015

Recently, the demand for a PRT(Personal Rapid Transit) system based on autonomous navigation is increasing. Accordingly, the applicability investigations of the PRT system on rail tracks or roadways have been widely studied. In the case of unmanned vehicle operations without physical guideways on roadways, to monitor the position of the vehicle in real time is very important for stable, robust and reliable guidance of an autonomous vehicle. The Global Positioning System (GPS) has been commercially used for vehicle positioning. However, it cannot be applied in environments as tunnels or interiors of buildings. The PRT navigation system based on magnetic markers reference sensing that can overcome these environmental restrictions and the vehicle dynamics model for its H/W configuration are presented in this study. In addition, the design of a control S/W dedicated for unmanned operation of a PRT vehicle and its prototype implementation for experimental validation on a pilot network were successfully achieved.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.121-127
• /
• 2020

Innovation in local industries and the development of public services require, among other things, shared growth with the concept of regional co-prosperity. Regional co-prosperity is essentially aimed at bridging regional balance or regional gaps, which means a relationship that can achieve shared growth through complementary cooperation. In this study, cases using living labs were drawn based on the current status of industry-academic cooperation at the level of regional innovation and its policy implications were sought. Local governments are making various attempts to solve regional problems and enhance the linkage effect of securing mutual competitiveness through co-prosperity cooperation autonomously. In particular, an effective approach has been continued by activating the Living Lab Network, a problem-solving mechanism, focusing on pending regional issues. Above all, one of the strategies for regional development should be linked to the establishment of a cooperative system for win-win cooperation and policy means to support it. The activation of cooperative programs with local universities, companies and local governments and the case of problem-solving using living labs. Therefore, it suggested that active participation by various stakeholders and a cooperative governance model were needed to enable Living Lab.

• Journal of Agricultural Extension & Community Development
• /
• v.20 no.1
• /
• pp.205-233
• /
• 2013

The purpose of this study were to analyze the awareness about agriculture and rural community of youths and suggest the implications. The data were collected from 291 youths who are participated the agriculture-understanding programs conducted by Korea 4-H Association. For the comparing with 182 non-participants survey were together. The following conclusions were drawn from this study, (1) the program participants were aware of importance and multifunctionality roles of agriculture. (2) on the other hand, non-participants did not recognize or had little interest of the agricultural issues. (3) youths participated programs were have positive consensus of agriculture and rural community compared to non-participants. Based on the conclusion of this study, some implications were summarized as followings: (1) some programs need to motivate youths to complete course, (2) establish network system for the better activities, (3) support to extension teachers' expertise, (4) the programs need to expended to non-4H members.