• 한국ITS학회 논문지
• /
• 제8권2호
• /
• pp.60-66
• /
• 2009

Acceleration Noise는 교통류의 안정성을 진단하는데 중요한 지표이다. 하지만, 기존의 연구에서는 개별차량의 Acceleration Noise에 대해서만 수행되었고, 거시적 관점에서의 Acceleration Noise에 대해서는 연구가 이루어지지 않은 실정이다. 본 논문에서는 거시적 교통류 모니터링 지표인 Network Acceleration Noise를 제안하고, 이를 분석하여 거시 교통류 모니터링 활용방안에 대한 연구를 수행하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1858-1859
• /
• 2006

This paper presents a new fuzzy-neural-network based interacting multiple model (FNNBIMM) algorithm for tracking a maneuvering target. To effectively handle the unknown target acceleration, this paper regards it as additional noise, time-varying variance to target model. Each sub model characterized by the variance of the overall process noise, which is obtained on the basis of each acceleration interval. Since it is hard to approximate this time-varying variance adaptively owing to the unknown acceleration, the FNN is utilized to precisely approximate this time-varying variance. The gradient descendant method is utilized to optimize each FNN. To show the feasibility of the proposed algorithm, a numerical example is provided.

• Smart Structures and Systems
• /
• 제31권5호
• /
• pp.501-516
• /
• 2023

Dynamic irregularity and acceleration of bridges subjected to high-speed trains provide crucial information for comprehensive evaluation of the health state of under-track structures. This paper proposes a novel approach for real-time estimation of vertical track dynamic irregularity and bridge acceleration using deep generative adversarial network (GAN) and vibration data from in-service train. The vehicle-body and bogie acceleration responses are correlated with the two target variables by modeling train-bridge interaction (TBI) through least squares generative adversarial network (LSGAN). To realize supervised learning required in the present task, the conventional LSGAN is modified by implementing new loss function and linear activation function. The proposed approach can offer pointwise and accurate estimates of track dynamic irregularity and bridge acceleration, allowing frequent inspection of high-speed railway (HSR) bridges in an economical way. Thanks to its applicability in scenarios of high noise level and critical resonance condition, the proposed approach has a promising prospect in engineering applications.

• 한국지능시스템학회논문지
• /
• 제16권4호
• /
• pp.472-478
• /
• 2006

본 논문에서는 기동표적의 추적에 대한 새로운 퍼지 뉴럴 네트워크 기반의 다중모델 기법을 소개한다. 표적의 가속도를 효과적으로 다루기 위하여, 이 논문에서는 표적의 가속도를 시변 변수인 표적의 추가적인 잡음으로 두고 각각의 가속도 간격의 정도에 따라 얻어지는 모든 잡음에 대한 변수에 의해 각각의 하부 모델들을 특성화시켰다. 모르는 가속도에 따른 시변 변수를 적응적으로 어립잡기는 어렵기 때문에 정밀한 계산을 위하여 퍼지 뉴럴 네트워크가 이용되었다. 퍼지 뉴럴 네트워크의 동정을 위해서는 오차 역전파 학습법을 사용하였다. 그리고 제안된 알고리즘의 수행 가능성을 보여주기 위하여 몇 가지 예를 제시하였다.

• 대한전기학회논문지
• /
• 제39권12호
• /
• pp.1306-1316
• /
• 1990

A controller using a multilayer neural network is proposed to the dynamic control of a PUMA 560 robot arm. This controller is developed based on an error back-propagation (BP) neural network. Since the neural network can model an arbitrary nonlinear mapping, it is used as a commanded feedforward torque generator. A Proportional Derivative (PD) feedback controller is used in parallel with the feedforward neural network to train the system. The neural network was trained by the current state of the manipulator as well as the PD feedback error torque. No a priori knowledge on system dynamics is needed and this information is rather implicitly stored in the interconnection weights of the neural network. In another experiment, the neural network was trained with the current, past and future positions only without any use of velocity sensors. Form this thim window of position values, BP network implicitly filters out the velocity and acceleration components for each joint. Computer simulation demonstrates such powerful characteristics of the neurocontroller as adaptation to changing environments, robustness to sensor noise, and continuous performance improvement with self-learning.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.619-624
• /
• 2004

In this research, the structural health monitoring method using wavelet packet analysis and artificial neural network (ANN) is developed. Wavelet packet Transform (WPT) is applied to the response acceleration of a 3 element-cantilever beam which is subjected to impulse load and Gaussian random load to decompose the response signal, then the energy of each component is calculated. The first ten largest components in magnitude among the decomposed components are selected as input to an ANN to identify the damage location and severity. This method successfully predicted the amount of damage in the structure when the structure is subjected to impulse load. However, when the beam is subjected to Gaussian random load which can be considered as ambient vibration it did not yield satisfactory results. This method is applicable to structures such as machinery gears that are subjected to repetitive loads.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.619-623
• /
• 2003

In this research, Forced Vibration Test(FVT) on a cable stayed bridge was conducted to examine the validity of the frequency domain pattern recognition method using signal anomaly index and artificial neural network. The considering structure, Samchunpo Bridge, located in Sachun-Shi, Kyungsangnam-Do, is a cable stayed bridge with the 436 meter span. The excitation force was induced by a sudden braking of a fully loaded truck, and vertical acceleration signals were acquired at 14 points. The initial 2-dimensional FE-model was developed from the design documents to prepare the training sets for the artificial neural network, and then the model calibration was performed with the field test data. As a result of the model calibration, we obtained the FFT spectrums from the model simulation, which was similar to those from the vibration test. These tests and the simulation data will be used fur the structural identification using arbitrarily added masses to the bridge.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1437-1442
• /
• 2006

The international competition in car markets has continuously required the research about the sound quality of a car. The domestic carmakers have also invested a lot of money for the research and development of interior sound quality of passenger cars. Therefore, the aim of this research is to predict the customer's evaluation of a new vehicle. There are two major research works to achieve this goal in this research. The first one is to search questionnaires about the sound quality, which customers prefer, to identify the relationship between these questionnaires and sound metrics that is a psychoacoustics parameters, and to development sound indexes for the questionnaires. All tests for this work is proceed on the road test during acceleration. The second one is to balance the sound component (engine noise, booming noise, road noise and wind noise) of a passenger. This wok will be tested on the constant speed. All of research results will be contributed to the development of brand sound quality of a new passenger car.

• 한국정보통신학회논문지
• /
• 제21권9호
• /
• pp.1725-1730
• /
• 2017

가속도 센서와 자이로스코프 센서는 반복운동 검출을 위해 사용하는 대표적인 센서로써 다양한 운동 성분을 분석하는데 활용되어 왔다. 하지만 이 두 센서는 잡음 민감성과 오차가 누적되는 문제점을 가지고 있다. 이와 같은 하드웨어적인 문제점을 극복하기 위해, 두 센서를 함께 사용하려는 시도가 있어왔고, 상보필터는 가속도 센서와 자이로스코프 센서의 단점은 최소화하고 장점을 극대화함으로써 두 센서가 가지는 문제점을 완화시키는 성공적인 결과를 보여주었다. 이 논문에서는 상보필터에 신경망을 도입함으로써 상보필터로 처리할 수 없는 여러 변수를 사전에 학습을 통하여 생성한 망을 이용해서 처리하는 개선된 방법을 소개한다. 신경망은 다양한 경우의 수를 미리 학습하여 예측하지 못한 환경 혹은 상황에도 정확한 측정이 가능한 알고리듬이다. 제안한 방법은 반복운동을 처음, 중간, 끝 세 개의 영역으로 분류하여 신경망을 적용한다. 그 결과 영역별 인식률은 96.35%, 98.77%, 96.92%이고 이를 바탕으로 측정한 정확도는 97.18%임을 실험을 통해 확인할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.236-241
• /
• 2010

This paper presents a wear diagnosis method for centrifugal impellers by using an accelerometer. The features are calculated from raw and wavelet transformed signals with several statistical methods applied in time or frequency domains. From the effectiveness coefficient test, it is shown that 7th level of wavelet transformed signal is suitable for wear classification problems. A neural network with 5 feature sets is applied to diagnose the wear magnitude of pump impellers. The verification result reveals that high accuracy for the wear diagnosis of impellers can be obtained by using wavelet features transformed from acceleration signals.