• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.526-529
• /
• 2004

The nematic liquid crysta](NLC) aligning capabilities using a-C:H thin film deposited at the three kinds of rf bias condition were investigated. A high pretilt angle of NLC on low substrate rf bias applied a-C:H thin films was observed and the low pretilt angle of the NLC on high substrate rf bias applied a-C:H thin films was observed. Consequently, the high NLC pretilt angle and the good aligning capabilities of LC alignment by the IB alignment method on the a-C:H thin film deposited at 1 W rf bias condition can be achieved. It is considered that pretilt angle of the NLC may be attributed to substrate rf bias condition and IB energy time. Therefore, LC alignment is affected by topographical structure forming strong IB energy.

• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.530-535
• /
• 2004

We have studied 90$^{\circ}$ twisted nematic mode switching by fringe electric field(F-TN mode) using a liquid crystal (LC) with negative dielectric anisotropy. In the device, two polarizers are parallel each other, electrodes exist only on bottom substrate, and one of rubbing direction is coincident with polarizer axis. Therefore, the cell shows a black state before a voltage is applied. With a bias voltage generating fringe-electric field, the LC twists perpendicular to fringe electric field such that the LCs are almost homogeneously aligned except near the bottom surface since the negative type of the LC is used. Consequently, the new device exhibits much wider viewing angle than that of the conventional TN mode due to in-plane switching and relatively high transmittance since the LC director above whole electrode area aligns parallel to the polarizer axis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.324-327
• /
• 2005

We propose a novel technique for evaluating the azimuthal anchoring strength of the alignment film on the nematic liquid crystal (LC). In our evaluation, a unique cell, which has two domain in one cell, was used; one is hybrid aligned nematic (HAN) region, the other is twsited nematic (TN) region (viz. HAN/TN two domain cell). From the comparison of director angles on the front substrate with each region, we are able to determine the angle between easy axis and real director axis on the front substrate. From this evaluation, the azimuthal anchoring strength was obtained accurately.

• Journal of Information Display
• /
• 제5권1호
• /
• pp.34-40
• /
• 2004

Time resolved infrared IR absorption spectroscopy is carried out to investigate the dynamics of electric field induced reorientation of the biphenyl molecular core and alkyl tail sub-fragments of the nematic liquid crystal 5CB (4-pentyl-4-cyano-biphenyl). The planar to homeotropic transition for high pre-tilt planar aligned cells, is studied for switching times ranging from 200 ${\mu}sec$ down to 80 ${\mu}sec$, the latter a factor of 1000 times faster than any previous nematic IR study. The reorientation rates of the core and tail are found to be the same to within experimental error and scale inversely with applied field squared, as expected for the balance of field and viscous torques. Thus any molecular conformation change during switching must relax on a shorter time scale. A simple model shows that no substantial differences exist between the reorientational dynamics of the tails and cores on the time scales longer than on the order of 10 ${\mu}s$.

• 한국전기전자재료학회논문지
• /
• 제14권4호
• /
• pp.336-340
• /
• 2001

We have investigated the generation of pretilt angle and alignment stability for a nematic liquid crystal (NLC) with obliquely polarized UV exposure on the three kinds of photo-polymer. High pretilt angle of the NLC was obtained by polarized UV exposure on a PM4Ch surface for 1 min. But, the low pretilt angle of he NLC on a PVCi surface was observed. The pretilt angle generated is attributed ot the photosensitivity by the long side chaining of photo-polymer. Also, a good thermal stability of the three kinds of photo-polymer were obtained by thermogravimetric analysis (TGA) measurement until 300$^{\circ}C$. Finally, the good LC aligning capabilities using the photodimerization method were observed by annealing-treatment until 150$^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.514-517
• /
• 2002

We investigated response characteristics of twisted nematic (TN) cell with different nematic liquid crystals (NLCs) and cell gap d on a rubbed polyimide (PI) surface. High transmittance and fast response time of the TN cell on the rubbed PI surface were achieved by using high birefringence (${\Delta}n$) and low cell gap d. The response time of TN cell on the rubbed PI surface was measured 5.1 ms. The transmittance and response time of the TN cell on the rubbed PI surface decreased with decreasing ${\Delta}nd$.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.878-884
• /
• 1998

We have investigated that the monodomain alignment of nematic liquid crystal (NLC) is obtained with polarized ultraviolet(PUV) light irradiation on polyimide (PI) surface. The LC alignment capability increases with increasing the UV light irradiation time. The polarized UV light irradiation on oblique angle of 60。 irradiated on PI surface rotated by 90。 at 10 min. after being normally irradiated on PI surface at 30 min., the generated pretilt angle of NLC is about 2.5。. The pretilt angle of NLC is attributed to the interaction between the LC molecules and the asymmetric triangular structure of polymer surface due to photo-depolymerization of polymer with the oblique UV light on PI surface. The voltage -transmittance and response time characteristics of photo-aligned twisted nematic (TN)-LCD with UV light irradiation time 60 min. were almost same in comparison with the rubbing-treated TN-LCD.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.911-917
• /
• 1998

In this paper, we have investigated the generation of pretilt angle for nematic liquid crystal (NLC) in a cell with oblique non-polarized ultraviolet(UV) light irradiation polyimide (PI) surface. It was found that the monodomain alignment of the NLC is obtained with an angle of incidence of 70∼85。 on PI surface. It is considered that the monodomain alignment of NLC is attributed to anisotropic of NLC is about 3。 with and angle of incidence of 70∼75。. Finally, we observed that the voltage-transmittance, response time, and voltage-holding-ratio(VHR) characteristics of photo-aligned twisted nematic(TN)-LCD with and angle of incidence of 85。 on PI surface were almost same compared to rubbing -treated TN-LCD.

• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.426-431
• /
• 2004

We have studied the pressure-dependent liquid crystal's dynamics in a twisted nematic (TN) liquid crystal panel with thin film transistor by applying an external pressure to it. When the external pressure is applied to the panel in a dark state, the disclination lines were generated as a light leakage whereas they did not appear in a simple test cell that has only pixel and common electrodes. It was because the disclination lines were Provoked by the electric field between pixel electrode and data/gate bus line for active matrix driving. Consequently, the external pressure resulted in dynamic instability of the liquid crystal so that the disclination lines at the data/gate bus line intruded into the active area.

• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.808-811
• /
• 2002

We investigated response characteristics of twisted nematic (TN) cell with different nematic liquid crystals (NLCs) and cell gap d on a rubbed polyimide (PI) surface. High transmittance and fast response time of the TN cell on the rubbed PI surface were achieved by using high birefringence (Δn) and low cell gap d. The response time of TN cell on the rubbed PI surface was measured 5.1 ms. The transmittance and response time of the TN cell on the rubbed PI surface decreased with decreasing Δnd.