• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.425-428
• /
• 2009

Aerospace engine application needs to stand high temperature and pressure. Because of its mechanical properties such as high strength at high temperature, Alloy 718 is used aerospace engine application about 80%. But alloy 718's mechanical properties cause some problem to manufacturing profile ring like damage of material and mold. In this study, alloy 718's mechanical properties investigated for knowing its formability and using FE-Simulation for designing profile ring roll process and mold shape. Profile ring rolling processing is designed with "Initial material$\rightarrow$Blank$\rightarrow$Linear Ring$\rightarrow$Profilering". Blank's heating temperature is setting $1100^{\circ}C$ for manufacturing a trial profile ring on the basis of FE-Simulation. As a result of manufacturing alloy 718 profile ring, it is possible to make near target profile shape ring with all of the processing condition which gives in this study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.590-595
• /
• 2000

On the contrary to the increasing needs of shape qualities, most of quality inspections are carried out by manual or operator's insight. To find the causes of shape inferiority, it is required to gather and analyze the shape measurement data. As a result the winding profile measurement system ($TELE-SCANNER^{(R)}$) is developed to analyze the coiling process and automate the manual measuring process for winding profile of hot-rolled coils. The winding profile measurement system measures and analyzes winding profile shapes of hot-rolled coils, and classifies them into several dominant patterns that are related to normal or abnormal mechanical conditions of down-coiler. The system also contains analysis software to quantify the winding profile shapes and patterns, and to produce statistics to help search the causes of profile shape inferiority.

• 정보처리학회논문지C
• /
• 제15C권1호
• /
• pp.69-78
• /
• 2008

본 논문에서는 적응화된 콘텐츠 서비스를 위해 콘텐츠 적응화 시스템에서 효율적으로 사용자 프로파일을 교환하는 방법을 제안한다. 사용자에게 적응화된 콘텐츠를 제공하기 위해 프로파일들은 콘텐츠 적응화 시스템의 디바이스들 간에 지속적으로 교환된다. 또한 프로파일들은 주기적, 비주기적, 이벤트, 요청 및 응답에 따라 교환되어야 한다. 따라서 많은 네트워크 트랙픽이 발생하며 컴퓨팅 파워를 필요로 한다. 이와 같은 문제점들을 해결하기 위한 프로파일 교환 연구가 필요하다. 효율적인 프로파일 교환을 위하여 콘텐츠 적응화 시스템에서 프로파일 생성 정보, 교환 정보, 교환 형태 등을 분석하고 분석된 프로파일 정보들을 이용하여 프로파일 교환 절차를 정의하였다. 또한 프로파일 처리 시간을 줄이는 프로파일 구성 정보 제공 방법과 프로파일 전송횟수를 줄이는 사용자 설정 값 방법을 제안하였다. 성능 평가 결과 프로파일 구성정보 제공 방법은 프로파일 처리 시간을 7%로 단축시켰으며, 사용자 설정 방법은 프로파일 전송횟수를 줄여 프로파일 교환에 효율적이었다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제37권4호
• /
• pp.252-263
• /
• 2010

임베디드 시스템의 개발에서 저전력을 소모하는 소프트웨어 개발에 대한 요구가 증대하고 있다. 따라서 임베디드 소프트웨어 개발 과정에서 소모 전력에 대한 정량적인 예측을 가능하도록 하는 연구가 늘어나고 있는 추세이다. 기존의 소모 전력 분석은 소스 코드를 중심으로 이루어져왔으나 분석을 위한 노력 및 시간이 많이 요구된다는 단점으로 인하여, 소프트웨어 모델 기반의 소모 전력 분석 기법에 관심을 두는 추세이다. 본 논문은 UML 모델 기반의 임베디드 소프트웨어 모델링 과정에서 설계 모델을 이용한 소모 전력 분석에 주안점을 두었으며, 이를 위하여 OMG가 개발한 MARTE 프로파일을 확장하였다. 이러한 확장은 별도의 분석용 모델을 개발하지 않고, UML 다이어그램을 이용한 소모 전력 분석이 가능하도록 한다.

• 전기학회논문지P
• /
• 제66권3호
• /
• pp.135-138
• /
• 2017

This study analyzed with the case analysis of a series of processes from job analysis survey and results analysis, and academic achievement in order to transform the curriculum of existing courses of the NCS-based video broadcasting. Also this study analysed the existing curriculum and analyzed the trend of workforce trends and needs of the broadcasting content industry. Also through a needs analysis for the industry and alumni and students, video graphics, video editing and video directing were selected. In this paper it dealt mainly with respect to the video graphics in a dual job. Modeling capability into the unit through a job analysis, animation, effects and lighting were chosen accordingly based introduction of graphics and application of graphics were derived two courses and selected profiles and performance criteria. This training according to the NCS curriculum for students was evaluated based on the student's job was to investigate the learning ability.

• 한국유체기계학회 논문집
• /
• 제16권1호
• /
• pp.5-10
• /
• 2013

The performance of screw air compressor is affected by rotor profile, lobe number, air end wrap angle, rotor L/D ratio, suction and discharge ports, revolutions of air end and load regulation control, etc. In general, an efficient screw compressor needs a rotor profile of which has a large flow cross-section area, short sealing lines and a small blow-hole. In this study, experimental study was performed with newly designed $5{\times}6$ rotor profile and various shapes of air end. Results show that the measured specific power consumption of the newly designed screw compressor appeared to be lower than any other published data for the equivalent screw compressors manufactured.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.263-266
• /
• 2002

An optical method for surface roughness estimation based on statistical analysis of the light intensity of a scattered laser beam pattern. The method is very simple but has a disadvantage that no more information than the averaged roughness is estimated. In this study a new try was conducted to derive more advanced surface information from the details of the light intensity distribution. Some periodic ripples among the light intensity distribution being assumed to relate with scratch left on the machined surface, a corresponding surface profile is estimated from the ripples using FFT and IFFT algorithm. IFFT technique is used to extract some dominant signal components among the intensity distribution. Compared to the measured profiles by a stylus type surf-tester, the profiles obtained through the proposed method are probably acceptable in a sense of the profile shape. Calibration of the amplitude needs more works in the future.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.632-634
• /
• 2012

무선 네트워크 연결을 위해서는 무선 AP 프로파일 리스트에서 우선순위의 AP를 자동 선택하여 연결하는 방식이 사용되는데, 이는 프로파일 등록시점에 따라 결정되어 변화하는 사용자의 요구에 대처하지 못하는 부분이 있다. 본 연구에서는 사용자의 접속 빈도에 따른 무선 AP 프로파일을 작성함으로써, 사용자의 요구에 부합되는 적응적 네트워크 접속에 관해 연구한다.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.281-287
• /
• 2008

An acousto-optic tunable filter based 3-D micro surface profile measurement using an equally spaced 5 spectral phase shifting is described. The 5-bucket spectral phase shifting method is compared with a Fourier-transform method in the spectral domain. It can provide a fast measurement capability while maintaining high accuracy since it needs only 5 pieces of spectrally phase shifted imaging data and a simple calculation in comparison with the Fourier transform method that requires full wavelength scanning data and relatively complicated computation. The 3-D profile data of micro objects can be obtained in a few seconds with an accuracy of ${\sim}10nm$. The 3-D profile method also has an inherent benefit in terms of being speckle-free in measuring diffuse micro objects by employing an incoherent light source. Those simplicity and practical applicability is expected to have diverse applications in 3-D micro profilometry such as semiconductors and micro-biology.

• Safety and Health at Work
• /
• 제4권2호
• /
• pp.117-121
• /
• 2013

This paper describes progress on formulating a national asbestos profile for the country of Vietnam. The Center of Asbestos Resource, Vietnam, formulated a National Profile on Asbestos-related Occupational Health, with due reference to the International Labor Organization/World Health Organization National Asbestos Profile. The Center of Asbestos Resource was established by the Vietnamese Health Environment Management Agency and the National Institute of Labor Protection, with the support of the Australian Agency for International Development, as a coordinating point for asbestos-related issues in Vietnam. Under the National Profile on Asbestos-related Occupational Health framework, the Center of Asbestos Resource succeeded in compiling relevant information for 15 of the 18 designated items outlined in the International Labor Organization/World Health Organization National Asbestos Profile, some overlaps of the information items notwithstanding. Today, Vietnam continues to import and use an average of more than 60,000 metric tons of raw asbestos per year. Information on asbestos-related diseases is limited, but the country has begun to diagnose mesothelioma cases, with the technical cooperation of Japan. As it stands, the National Profile on Asbestos-related Occupational Health needs further work and updating. However, we envisage that the National Profile on Asbestos-related Occupational Health will ultimately facilitate the smooth transition to an asbestos-free Vietnam.