• Smart Structures and Systems
• /
• v.24 no.4
• /
• pp.447-457
• /
• 2019

The use of Tuned mass dampers (TMD) has proved to be effective in reducing the effects of vibrations caused by wind loads and far-field seismic action. However, its effectiveness in controlling the dynamic response of structures under near-fault earthquakes is still under discussion. In this case, the uncertainty about the TMD performance arises from the short significant duration of near-fault ground motions. In this work, the TMD effectiveness for increasing the safety margin against collapse of structures subjected to near-fault earthquakes is investigated. In order to evaluate the TMD performance in the proposed scenario, the nonlinear dynamic response of two reinforced concrete (RC) frames was analyzed. TMDs with different mass values were added to these structures, and a set of near-fault records with frequency content close to the fundamental frequency of the structure was employed. Through a series of nonlinear dynamic analysis, the minimum amplitude of each seismic record that causes the structural collapse was found. By comparing this value, called collapse acceleration, for the case of the structures with and without TMD, the benefit produced by the addition of the control device was established.

• Journal of the Korean Home Economics Association
• /
• v.35 no.2
• /
• pp.345-358
• /
• 1997

This study investigated the pattern of division of household labor between married couples and the determining variables of the division of household work. In addition, this study examined the effect of the pattern of the division of household work and the sense of fairness on marital satisfaction. Two hundreds forty two married couples living near seoul were selected. Both wives and husbands reported their daily time-use pattern. According to the results, flexibility of husbands' work schedules hours of market work of husbands, husbands' sex role attitudes, and the presence of household assistant affected significantly on the extent of household work time. In addition, husbands' household work time had direct effects on marital satisfaction of couples. In wives' hours of household labor, the significant variables were wives' employment status, presence of younger children, total income, wives' sex role attitudes, and hours of household labor performed by housework assistant. In addition, wives' sense of fairness had impact significantly on marital satisfaction.

• East Asian mathematical journal
• /
• v.18 no.2
• /
• pp.245-259
• /
• 2002

In this paper, all rings or (left)near-rings R are associative, and for near-ring R, all R-groups are right R action and all modules are right R-modules. First, we begin with the study of rings in which all the additive endomorphisms or only the left multiplication endomorphisms are generated by ring endomorphisms and their properties. This study was motivated by the work on the Sullivan's Problem [14]. Next, for any right R-module M, we will introduce AM modules and investigate their basic properties. Finally, for any nearring R, we will also introduce MR-groups and study some of their properties.

• Bulletin of the Korean Mathematical Society
• /
• v.38 no.1
• /
• pp.149-156
• /
• 2001

In this paper, we initiate the investigation of ring in which all the additive endomorphisms are generated by ring endomorphisms (AGE-rings). This study was motivated by the work on the Sullivan’s Research Problem [11]: Characterize those rings in which every additive endomorphism is a ring endomorphism (AE-rings). The purpose of this paper is to obtain a certain characterization of AGE-rings, and investigate some relations between AGE and LSD-generated rings.

• Journal of Plant Biology
• /
• v.17 no.2
• /
• pp.63-68
• /
• 1974

This work was carried out to clarify the subaerial diatoms from Yong-neup (swamp) in Mt. Daeam, near DMZ in Korea from May 1968 to Oct. 1969. These subaerial phytoplanktons live in moss, attaching on moss stems and leaves in air. From this investigation, 18 kinds of subaerial diatoms were identified. Among them, 7 species are known for the first time to occur in Korea.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.213-217
• /
• 2008

This paper describes an application of centrifugal compressor optimization system, in which the blade profile of impeller is represented with NURBS(Non-Uniform Rational B-Spline) curve. A commercial CFD(Computational Fluid Dynamics) program named NUMECA fine/turbo was used to evaluate the performance of the whole centrifugal compressor flow passage including impeller and diffuser. The whole optimization design system was integrated based on iSIGHT, a commercial integration and optimization software, which provides a direct application of some optimization algorithms. To insure the practicability of optimization, the performance of centrifugal compressor under all condition was concerned during the optimizing process. That means a compositive object function considering the aerodynamic efficiency, pressure ratio and mass flow rate under different work condition was applied by using different weight number for different conditions. Using the optimization method described in this paper, an optimized design of the impeller blade of centrifugal compressor was obtained. Comparing to the original design, optimized design has a better performance not only under the design work condition, but also the off-design work condition including near stall and near choke condition.

• The Journal of Art Theory & Practice
• /
• no.10
• /
• pp.7-23
• /
• 2010

In this paper I examine Cesare Cattaneo and Mario Radice's Camerlata Fountain in northern Italy, focusing on the work's relation to the urban environment and its "mobility" over several decades. As I demonstrate, the design of Cattaneo and Radice's work relates to the circular layout of a traffic intersection and was intended to be viewed from the window of a moving automobile. In this way it continues a tradition, begun by the Futurists and continued by Le Corbusier, who saw the car as central to modern art and architecture. Moreover, the work relates to the concept of mobility in so far as it was in itially built in 1936 in Milan and subsequently destroyed and reconstructed during 1962 in its current location near Como. As the history of the work's conception, production and reception demonstrates, Cattaneo and Radice's work not only responds to the experience of vehicle-generated mobility in modern society but also reveals the tensions and anxieties associated with an increasingly dynamic urban environment.

• Structural Engineering and Mechanics
• /
• v.58 no.4
• /
• pp.719-729
• /
• 2016

The main objective of the present paper is to study the effect of the yield criterion on the magnitude of the strain rate and plastic work rate intensity factors in axisymmetric flow of isotropic incompressible rigid perfectly plastic material by means of a problem permitting a closed-form solution. The boundary value problem consisting of the axisymmetric deformation of a plastic tube is solved. The outer surface of the tube contracts. The radius of the inner surface does not change. The material of the tube obeys quite a general yield criterion and its associated flow rule. The maximum friction law is assumed at the inner surface of the tube. Therefore, the velocity field is singular near this surface. In particular, the strain rate and plastic work rate intensity factors are derived from the solution. It is shown that the strain rate intensity factor does not depend on the yield criterion but the plastic work rate intensity factor does.

• Journal of Engineering Education Research
• /
• v.21 no.3
• /
• pp.56-65
• /
• 2018

With rapid advance of technologies including information and communication technologies, jobs are evolving faster than ever. Architectural engineering is no exception in this regard, and the green architectural engineering is emerging fast as a promising new field. In this study, a Delphi study of expert architectural engineers are conducted to find out (1) near future prospects of the field, (2) near future emerging jobs, (3) competencies needed for these jobs, and (4) educational content necessary to build these competencies with regards to the green architectural engineering. Initial Delphi survey consisting of open-ended questions in the above four areas were conducted and came out with 65 items after duplicate removal and semantic refinements. Further refinements via second and third wave of Delphi results into 40 items that the 13 architectural engineering experts may largely agree upon as future prospects with regards to the green architectural engineering. Findings indicate that it is expected that the demand for green architectural engineering and needs for automatic energy control system increase. Also, collaborations with other fields is becoming more and more important in green architectural engineering. The professional work management skills such as knowledge convergence, problem solving, collaboration skills, and creativity linking components from various related areas seem to also be on the increasing need. Near future ready critical skills are found to be the building environment control techniques (thermal, light, sound, and air), the data processing techniques like data mining, energy monitoring, and the control and utilization of environmental analysis software. Experts also agree on new curriculum for green building architecture to be developed with more of converging subjects across disciplines for future ready professional skills and experiences. Major topics to be covered in the near future includes building environment studies, building energy management, energy reduction systems, indoor air quality, global environment and natural phenomena, and machinery and electrical facility. Architectural engineering community should be concerned with building up the competencies identified in this Delphi preparing for fast advancing future.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3101-3101
• /
• 2001

Near Infrared spectroscopy (NIR) used on human skin measurement was explored in the past decade. Many publications in different journals and magazines discussed the feasibility of the NIR technique for cosmetic product property studies. Based upon the results of pioneers, we have pursued some work of the NIR instrument coupled with a probe module for skin measurement in vivo and vitro. In part I of this paper, the specific Near Infrared spectroscopy instrument stability, human subject conditions and other parameters, which could affect the measurements reproducibility are discussed. Second derivative NIR spectra and Principle Components Analysis (PCA) are utilised for data interpretation. In part II of this paper, the relationship of human skin moisture and ageing, the gender information and finally, the discovery of penetration depth of NIR incident light on skin are reported. A theoretical penetration depth calculation equation is proposed. In part III, the study results of a couple of commercial skin care products effect will be described. The skin lotions were applied on human skin (in vivo) in order to exam the NIR feasibility to monitor the changes of moisture level. The results are consistently positive. From our primary study, it can conclude that the NIR is potentially a very powerful instrument for skin condition diagnostics, either for cosmetic and/or for medication purposes.