• Journal of Korean Medical classics
• /
• v.23 no.2
• /
• pp.63-87
• /
• 2010

Natural Medicine is a medical system that tries to find the cause and cure of the disease in the nature emphasizing on natural healing power of human body. The most important value of traditional medicine in east Asia lies on the fact that this medicine is a medical culture and natural medicine that was selected by instinct and human nature reflecting the best possible remedy by the wisdom of evolution, and views the living phenomenon based on relation and circulation. This medicine is a natural medicine that tries to recover and promote the natural healing power by vitality and is a system that cumulates various empirical information about unique and complicated life phenomenon as a legacy of evolution in the body and the disease. The understanding of variation and adaptation of human species should be based on thorough knowledge of origin, instinct and nature of human as well as knowledge of survival and adaptation of human and environment based on evolution. And through this insight, the prevention and treatment of modern diseases should be developed. In this regards, traditional medicine in east Asia should be highlighted again as a study on adaptation and harmony of penetrating the cultural history of mind which has led the history of biological body and change of society and culture, and the repository of practical wisdom and knowledge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.619-625
• /
• 2019

It is difficult to design because of the plug-holing phenomenon in which the amount of smoke discharged from the vertical vent is smaller than the designed amount of smoke. In this study, the effect of cross-sectional area ratio of tunnel and natural ventilation and heat release rate of fire source on plug-holing phenomenon occurring in natural ventilation system was experimentally analyzed. In the experiment model reduced to 1/20 size, the aspect ratio of the tunnel and the vertical vent was fixed, and the influence on the plug-holing phenomenon was confirmed by varying the sectional area ratio of the tunnel and the vertical vent. Experimental results show that the plug-holing phenomenon is caused by the comparison of the smoke boundary layer temperature with the temperature in the vertical vents, and the flow and temperature distribution characteristics under the vertical vents are changed as the cross-sectional area ratio of the tunnel and vertical vents increases. The plug-holing phenomenon is affected by the cross-sectional area ratio between the tunnel and the vertical ventilation. The greater the cross-sectional area ratio, the greater the probability of plug-holing.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.89-95
• /
• 2002

A shadow mask inside the Braun tube of a TV is sustained by springs attached to the glass panel, its vibration cause the picture image to discolor, which is called the microphonic phenomenon. It is found that it results from resonance when the natural frequency of the shadow mask coincides with that of built-in speaker sound. This paper describes experimental and analytical investigations by using FEM on the vibration problem of the shadow mask assembly. The simulation scheme may be efficiently used to develop a new design for a large-screen flat TV.

• The Journal of the Korean Society for Microbiology
• /
• v.19 no.1
• /
• pp.49-54
• /
• 1984

The authors isolated Vibrio parahaemolyticus from sea water, sea mud and various marine products in Busan shore area from 1981 to 1982, Among 100 isolated strains, 66 strains showed positive reaction in Kanagawa phenomenon. With the above 66 strains, the authors carred out test for detecting hemolysis activity of V.parahaemolyticus on human, rabbit, chicken, pig, goat, sheep and cow erythrocytes, in different media, such as modified Wagatsuma, nutrient, peptone and brain heart infusion agar plates media. The following results were obtained: 1. The media which can be used for Kanagawa phenomenon of V. parahoemolyticus were modified Wagatsuma, nutrient, peptone agar media, but not brain heart infusion agar medium. 2. The erythrocytes which showed positive Kanagawa phenomenon were those of human, rabbit, chicken and pig, but sheep, goat and cow erythrocytes showed no sensitivities.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.48-57
• /
• 2003

This study presents nonlinear vibration of a cantilever beam subjected to electromagnetic forces. The dynamic responses of the beam show various nonlinear phenomena with the variation of the system parameters, such as the jump phenomenon, multiple solutions, and the movement of the natural frequency. In this study the nonlinear stiffness due to electromagnetic forces which depends on air gap size is measured experimentally, and the system is modeled by a single degree of freedom nonlinear dynamic system and solutions are solved numerically. The numerical results show good agreements with the experimental results, which demonstrate the nonlinearity of electromagnetic force. Finally the occurrences of the jump phenomenon and the first, second and fourth harmonic components are confirmed in using the method of multiple scales.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.917-920
• /
• 2003

The sloshing phenomenon sometimes happens to occur in a liquid fuel tank due to the unexpected and/or inevitable vibrating conditions and may result in severe effects on the structural stability. This study deals with the development of experimental techniques for the evaluation of sloshing behaviors in the liquid fuel tank and for the identification of natural frequencies and mode shapes by varying with various vibrating conditions. Measurements of the pressure and load acting on the side surface of vibrated liquid fuel tank are carried in order to identify the effects of sloshing phenomenon by using various types of baffles. The results show that the baffles can be used to minimize the sloshing phenomenon in liquid fuel tank effectively

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.225-232
• /
• 2013

Omija component was known to possess natural odor, taste, color, and various general characteristics. Omija extraction was extracted using ethanol as a solvent. Omija extract showed a red-purple color of some viscous liquid state. Some conclusions from natural Omija extract were obtained as follow. The result of antimicrobial experiment to add Omija extract, the number of microbial population showed negative reaction from 3 days after it cultivated. This phenomenon could confirm that Omija component affected to antimicrobial effect. The result of dyeing experiment to add Omija extract, fiber dyeing effect showed with some ivory color after dyed to cotton and silk. Also, this phenomenon could confirm that Omija component affected to natural dyeing effect from observated dye state with biological microscope(BM). The result of instrumental analysis, inorganic components of K(109.60ppm), Na(3.500ppm), Ca(1.205ppm), Mg(0.900ppm), Li(0.350ppm), Si(0.380ppm), Cu(0.250ppm), Fe(0.125ppm), Zn(0.090ppm), etcs from Omija were ascertained with ICP/OES, and organic components of benzene(10.808), borny lacetate(11.289), phenol(14.183), ${\beta}$-terpinene(15.840), ${\alpha}$-terpinolene(17.616) etcs from Omija were ascertained with GC/MSD.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2743-2759
• /
• 2020

A detailed computational fluid dynamics (CFD) simulation analysis model was developed using ANSYS CFX 16.1 and analyzed to simulate the basic design and internal flow characteristics of a 180 MW small modular reactor (SMR) with a natural circulation flow system. To analyze the natural circulation phenomena without a pump for the initial flow generation inside the reactor, the flow characteristics were evaluated for each output assuming various initial powers relative to the critical condition. The eddy phenomenon and the flow imbalance phenomenon at each output were confirmed, and a flow leveling structure under the core was proposed for an optimization of the internal natural circulation flow. In the steady-state analysis, the temperature distribution and heat transfer speed at each position considering an increase in the output power of the core were calculated, and the conceptual design of the SMR had a sufficient thermal margin (31.4 K). A transient model with the output ranging from 0% to 100% was analyzed, and the obtained values were close to the T_hot and T_cold temperature difference value estimated in the conceptual design of the SMR. The K-factor was calculated from the flow analysis data of the CFX model and applied to an analysis model in RELAP5/MOD3.3, the optimal analysis system code for nuclear power plants. The CFX analysis results and RELAP analysis results were evaluated in terms of the internal flow characteristics per core output. The two codes, which model the same nuclear power plant, have different flow analysis schemes but can be used complementarily. In particular, it will be useful to carry out detailed studies of the timing of the steam generator intervention when an SMR is activated. The thermal and hydraulic characteristics of the models that applied porous media to the core & steam generators and the models that embodied the entire detail shape were compared and analyzed. Although there were differences in the ability to analyze detailed flow characteristics at some low powers, it was confirmed that there was no significant difference in the thermal hydraulic characteristics' analysis of the SMR system's conceptual design.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.746-751
• /
• 2003

When a cantilever beam rotates about the axis perpendicular to its longitudinal axis, its natural frequencies vary. This phenomenon which is caused by centrifugal inertia forces is often referred to as the stiffening effects. Since the variation of natural frequencies often creates critical problems for the rotating structures, it is necessary to control the variation of natural frequencies. As the cross section of a rotating cantilever beam varies, natural frequencies can be changed. The thickness and the width of the cantilever beam are assumed to be cubic spline functions in the present work. An optimization method is employed to find the optimal thickness and width of the rotating beam. This result can be used for the design of rotating structures such as turbine and helicopter blades.

• Vacuum Magazine
• /
• v.5 no.1
• /
• pp.9-12
• /
• 2018

Electronic nose has been developed for detection of various hazardous molecules, especially vapor organic compounds (VOCs), by adsorption and desorption phenomenon. However, although conventional electronic noses have provided many advantages such as simple detection and high sensitivity, they still need advanced technologies for selective specificity in real samples. In this review, we provide bionanoelectronic noses with natural receptors for selective odorant detection. This review includes from fabrication of natural receptors and conducting nanomaterials to bioelectronic noses. We also discussed their perspective applications for the future at the conclusion.