• KCID journal
• /
• v.18 no.1
• /
• pp.25-32
• /
• 2011

In order to effectively manage the reservoir, reservoir water quality management should be based on physicochemical and configurational characteristics. In this research, correlation between factors affecting the reservoir water quality was examined. Chl-a and COD shows the highest positive correlation. Chl-a and T-P also has a high positive correlation, however Chl-a and T-N show lower correlation relatively. Even though T-N is an important factor for phytoplankton growth which increase Chl-a concentration, corelation of Ch1-a and T-N shows that enough nitrogen in the reservoir isn't no longer limiting factor. The age of reservoir can cause of increasing COD and SS. Embankment height and elevation of reservoirs shows strong negative correlation to water quality. That means reservoir which is higher embankment height and locate in higher elevations is less contaminated. Regression expression was derived with Chl-a and water quality parameters, and height of reservoir. Finally Chl-a was simulated using regression expression and it was a good approach to predict the Chl-a concentration.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1198-1207
• /
• 2003

The purpose of this study was to develop customized necktie design according to Korean adult male's body characteristics. For this purpose, experimentations of visual sensory evaluation on visual stimuli which show a man's wearing various neckties were carried out. The subjects were students(n=130) majoring in fashion and design related area and experts(n=6). The data were analyzed by ANOVA, duncan test, pearson's correlation coefficient, cross tabulation using spss pc/sup +/ program. Also statistic of Korea adult men's body measurements(1997) were analyzed and used to decide appropriate necktie length according to the customer's various height. The results were as follows: First, there were significant difference in visual sensibility on the stimuli showing 1) relative location of belt and necktie, 2) neckties with various length using golden ratio to the experimental model's height. Therefore, the need of producing neckties with different length according to customer's various height were verified. Second, neckties with three different length(140cm, 145cm, 151cm) were suggested for the groups of 160cm-height, 170cm-height, 180cm-height according to Korean adult male's body characteristics and aspect of production.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.39-46
• /
• 1976

This study was undertaken to establish the cephalometric standards, using lateral cephalometric roentgenograms of 48 male and 53 female Korean adults with normal occlusion and acceptable profile. By Cohen's method, measurement of depth was taken parallel to the FH plane and expressed as a percentage of the cranial base depth (BA-N). And vertical height was measured along the line perpendicular to the FH plane and expressed as a percentage of the anterior face height (N-M). The following conclusions were obtained: 1) Means and standard deviations of craniofacial proportions of Korean adults were tabulated. 2) Cranial babe depth of male was greater than that of female. 3) The proportionate depth of the middle face was greater in female than in male. 4) The proportionate total anterior face height was greater in male than in female. And it was greater in Korean than in the white.

• Clinical and Experimental Pediatrics
• /
• v.61 no.3
• /
• pp.71-77
• /
• 2018

Purpose: Small for gestational age (SGA) is confusingly defined as birth weight (BW) either below 3rd percentile or 10th percentile for infants. This study aimed to compare postnatal catch-up growth between SGA groups according to different definitions. Methods: Data of 129 infants born with BW below the 10th percentile and admitted to Korea University Anam Hospital and Ansan Hospital were retrospectively reviewed. Height and weight were measured at 6, 12, and 24 months. Results were compared between group A (BW: <3rd percentile) and group B (BW: 3rd-10th percentile). Results: Group A included 66 infants and group B included 63. At age 6 months (n=122), 62.9% of group A and 71.7% (P=0.303) of group B showed catch-up growth in weight. At 6 months (n=69), 55.9% of group A and 80.0% of group B (P<0.05) showed catch-up growth in height. At 12 months (n=106), 58.5% of group A, and 75.5% (P=0.062) of group B showed catch-up growth in weight. At 12 months (n=75), 52.8% of group A and 64.1% of group B (P=0.320) showed catch-up growth in height. Up to age 24 months, 66.7%/80.0% in group A and 63.6%/80.0% in group B showed catch-up growth in weight/height. Conclusion: Despite different definitions, there were no significant differences between the two SGA groups in postnatal catch-up growth up to age 24 months, except for height at 6 months. Compared to infants with appropriate catch-up growth, low gestational age and BW were risk factors for failed catch-up growth at 6 months.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.2
• /
• pp.84-88
• /
• 2006

The effects of tip voltage, deflection setpoint, and tip velocity on height of $SiO_2$ line drawn by local anodization on Si wafer using scanning probe microscope were investigated. No local anodization was detected at smaller than -3 V of tip voltage. The line height increased at rate of 0.47 nm/V when the tip voltage is stronger than -3 V at $1{\mu}m/s$ tip velocity. From deflection setpoint, mechanical force between tip and substrate could be calculated and the threshold farce was $12\sim18nN$. The height of anodized $SiO_2$ lines is independent of the magnitude of force above the threshold force. The line height decreased as increasing the tip velocity and limited to 0.7 nm at -5 V tip voltage.

• Fire Science and Engineering
• /
• v.25 no.2
• /
• pp.126-131
• /
• 2011

This study is intended to understand mass loss rate and air entrainment rate of the whirl fire by height of fire source. Liquid fuels were methanol and n-Heptane which are used in many studies of whirl fire. Size of vessel was 100 mm ${\times}$ 100 mm ${\times}$ 50 mm and the vessel was made by stainless steel. When height of fire source changed from 0 cm to 30 cm, air entrainment rate showed the fastest in case of 0 cm. And in the same height of fire source, average and maximum air entrainment rate showed the fastest in 30 cm of anemometer. From the results of whirl fire for methanol and n-Heptane, mass loss rate and air entrainment rate of n-Heptane was found to faster 1.33 to 1.58 times and 4.38 to 5.44 times compared with methanol, respectively. Consequently, mass loss rate and air entrainment rate in whirl fire was able to identified decrease as height of fire source increases and the higher the heating value, increases the that's value.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.459-470
• /
• 1995

The purpose of this study was to determine whether any difference existed in craniofacial morphology between cleft children and normal subjects. Thirty three measurements of the various regions of cranium and face were obtained from lateral cephalometric radiograms in 40 cleft children(27 males, 13 females) and 40 normal subjects(23 males, 17 females) in our dental hospital from Jan. 1988 to Dec. 1995.The measurements were compared with those in control subjects who had no history of craniofacial abnormalities. The obtained results were as follows: 1. In the cranium, the cleft children had singificantly shorter posterior cranial base length(S-Ba) and total antero-posterior cranial base length(N-Ba) (P<0.05). 2. In the upper face, the cleft children had significantly shorter upper anterior facial height(N-ANS) and upper posterior facial height(Ptm'-SNL) (P<0.05). 3. In the lower face, the cleft children had significantly shorter antero-posterior mandibular length(Pog-Ar) and antero-posterior mandibular body length(Pog-Go) (P<0.05). 4. In the facial profile, the cleft children had significantly shorter total facial height(N-Me} and posterior facial height(S-Go) (P<0.05).

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.41-47
• /
• 2015

In this paper, the effective electron Schottky barrier height (${\Phi}_{Bn}$) of the Ni silicide/n-silicon (100) interface was studied in accordance with different thicknesses of the antimony (Sb) interlayer for high performance n-channel MOSFETs. The Sb interlayers, varying its thickness from 2 nm to 10 nm, were deposited by radio frequency (RF) sputtering on lightly doped n-type Si (100), followed by the in situ deposition of Ni/TiN (15/10 nm). It is found that the sample with a thicker Sb interlayer shows stronger ohmic characteristics than the control sample without the Sb interlayer. These results show that the effective ${\Phi}_{Bn}$ is considerably lowered by the influence of the Sb interlayer. However, the current level difference between Schottky diodes fabricated with Sb/Ni/TiN (8/15/10 nm) and Sb/Ni/TiN (10/15/10 nm) structures is almost same. Therefore, considering the process time and cost, it can be said that the optimal thickness of the Sb interlayer is 8 nm. The effective ${\Phi}_{Bn}$ of 0.076 eV was achieved for the Schottky diode with Sb/Ni/TiN (8/15/10 nm) structure. Therefore, this technology is suitable for high performance n-channel MOSFETs.

• YAKHAK HOEJI
• /
• v.28 no.5
• /
• pp.287-291
• /
• 1984

A rapid and accurate NMR procedure for the analysis of a mixture of sulfametrol, sulfalene and sulfameter in $CDCl_3$ and $dimethylsulfoxide-d_6$ was developed. Thioacetamide was used as an internal standard. The signals chosen for the analysis were a singlet of 4.03ppm due to the methoxyl group of sulfametrol, a singlet of 3.98ppm due to the methoxyl group of sulfalene and a singlet of 3.83ppm due to the methoxyl group of sulfameter. The quantification of the characteristic peak was done by the integration method and the peak height method. The variation coefficient of sulfametrol, sulfalene and sulfameter were 1.7(n=6), 1.7(n=6) and 1.4%(n=6), respectively in the peak height method and 8.9(n=6), 9.4(n=6) and 7.0(n=6), respectively in the integration method.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.1
• /
• pp.41-48
• /
• 1992

This experiment was carrid out to determine the effect of cutting height and nitrogen level on dead stubble, tiller and branch new shoot dry matter yield and total dry matter of sorghum-sudangrass hybrid{Sorghum bicolor (L.) Moench}.The main treatment was four cutting height(5cm, IOcm, 15cm, 20cm), and the sub treatment was three nitrogen level(l50kg, 250kg, 350kglha).The experiment was performed at the Collage of Natural Science of Kon-Kuk University at Chungju in 1988. 1. Plant length tends to increase in the high cutting height and high N level. Especially, the difference of plant height was significant in warm season. 2. The number of dead stubble after cutting was significantly(P