• Anatomy and Cell Biology
• /
• v.51 no.4
• /
• pp.284-291
• /
• 2018

The role of androgens in the development of cardiovascular diseases remains controversial. The current study therefore sought to determine the changes in the histomorphology of the common carotid artery of the male rat in orchidectomy-induced hypogonadism. Twenty-two Rattus norvegicus male rats aged 2 months were used. The rats were randomly assigned into baseline (n=4), experimental (n=9), and control (n=9) groups. Hypogonadism was surgically induced in the experimental group by bilateral orchiectomy under local anesthesia. At experiment weeks 3, 6, and 9, three rats from each group (experimental and control) were euthanized, their common carotid artery harvested, and routine processing was done for paraffin embedding, sectioning, and staining. The photomicrographs were taken using a digital photomicroscope for morphometric analysis. Orchidectomy resulted in the development of vascular fibrosis, with a significant increase in collagen fiber density and decrease in smooth muscle and elastic fiber density. Moreover, there was development of intimal hyperplasia, with fragmentation of medial elastic lamellae in the common carotid artery of the castrated rats. Orchidectomy induces adverse changes in structure of the common carotid artery of the male rat. These changes may impair vascular function, therefore constituting a possible structural basis for the higher incidences of cardiovascular diseases observed in hypogonadism.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.712-718
• /
• 2016

Platinum catalysts supported on the mesoporous material synthesized from Y zeolite were applied to synthesis of jet-fuel through n-octadecane hydroupgrading. The mesoporous aluminosolicate, $MMZ_{HY}$ was synthesized using Y zeolite as its framework source. The effect of the addition of Mg to $Pt/MMZ_{HY}$ catalyst for n-octadecane hydroupgrading was investigated. Catalyst characterization was performed with X-ray diffraction, $N_2$ adsorption, temperature-programmed reduction in hydrogen flow, temperature-programmed desorption of ammonia, and infrared spectroscopy of adsorbed pyridine. The high yield of jet-fuel over the $PtMg(2.0)/MMZ_{HY}$ can be attributed not only to the higher dispersion of Pt metal and higher reducibility, but also the higher amount of acid sites and higher strength of acid sites. The selectivity to iso-paraffin in the jet-fuel fraction could be reached above 80% over the optimized $PtMg/MMZ_{HY}$ catalyst.

• Parasites, Hosts and Diseases
• /
• v.53 no.1
• /
• pp.95-99
• /
• 2015

Strongyloides stercoralis can cause systemic infection, termed strongyloidiasis, and gastrointestinal ulcer disease in immunocompromised patients. However, to our knowledge, there are no reported cases of comorbid gastric adenocarcinoma and S. stercoralis infection. Here, we report a case of an 81-year-old Korean man who presented with S. stercoralis infection coexisting with early gastric adenocarcinoma (T1aN0M0). S. stercoralis eggs, rhabditiform larvae, and adult females were observed in normal gastric and duodenal crypts. They were also observed in atypical glands representative of adenocarcinoma and adenoma. Preliminary laboratory tests revealed mild neutrophilic and eosinophilic leukocytosis. A routine stool test failed to detect rhabditiform larvae in the patient's fecal sample; however, S. stercoralis was identified by PCR amplification and 18S rRNA sequencing using genomic DNA extracted from formalin-fixed paraffin-embedded tissues. Postoperatively, the patient had a persistent fever and was treated with albendazole for 7 days, which alleviated the fever. The patient was followed-up by monitoring and laboratory testing for 4 months postoperatively, and no abnormalities were observed thus far. The fact that S. stercoralis infection may be fatal in immunocompromised patients should be kept in mind when assessing high-risk patients.

• Korean Journal of Organic Agriculture
• /
• v.24 no.1
• /
• pp.123-130
• /
• 2016

The mortality was tested to organic control materials to the E. maslovskii adults by the dipping method in laboratory. As the result, in 2014, the extracts of Neem I was not shown control effect by 10.2% control efficacy to E. maslovskii adults in laboratory. The extract of Sophora flavescens roots was shown 84.7% mortality. And other 5 materials were shown 100% insecticidal activity to the adults in laboratory. I n 2015, Plant extract+pyrolignous acid Matrine 0.45% and Plant extract Matrine 0.5+paraffin oil 8% were shown 100% and 94.6% control efficacy, respectively. In the Japanese apricot orchards, the fruit damage rate was low on spray at 21th April in Daap, Gwangyang city, and 8th May Hwangjeon, Suncheon city in Jeonnam province in 2014. The fruit damage rate differed from spray timing and materials, but it was considered that the control of E. maslovskii should be in late April to early May. Otherwise, in 2015, the fruit damage was significantly low in late April spray in Daap, but no significant was in between one spray at 21th, 27th April and 2 spray that days. Meanwhile, the control effect was better 2 times spray of the days in Hwangjeon, Suncheon city in Jeonnam province. Therefore, in organic Japanese apricot, the use of insecticidal materials recommended to control over twice spay in from meddle to late April.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.731-743
• /
• 2018

In bio-jet fuel production, selecting operating conditions of hydro-upgrading is of great importance to make iso-Paraffin rich hydrocarbons with carbon distribution including jet fuel range. Herein, iso-Paraffin rich biofuel including jet fuel range hydrocarbons ($C_8-C_{16}$) is produced from simultaneous cracking and isomerization using n-Paraffin rich hydrocarbon derived from hydrotreated vegetable oil over 0.5 wt..% Pt/Zeolite catalyst. We report and analyze the yields and compositions in the produced hydrocarbons affected by various operating conditions, such as reaction temperature, reaction pressure, molar ratio of reactants, and weight hourly space velocity. Aforementioned operating conditions not only can help interpret the reaction dynamics of hydro-upgrading, but also further produce bio jet-fuel after distillation.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.1
• /
• pp.100-109
• /
• 2021

Objective : Diffuse astrocytic tumour (DAT) is a diffuse infiltrative astrocytoma tumour accompanied by molecular parameters such as the presence or absence of isocitrate dehydrogenase (IDH) gene mutations. Ki-67 is a marker for DAT proliferation, while programmed death ligand 1 (PD-L1) indicates an immune evasion mechanism. This study aimed to analyze the correlation among mutant IDH1 R132H, Ki-67, and PD-L1 immunoexpression in the DAT. Methods : A cross-sectional study was carried out on 30 paraffin blocks of DAT cases. Paraffin block samples consist of grade II (n=14), grade III (n=8), and grade IV (n=8). In this study, the immunohistochemistry-staining of mutant IDH1 R132H, Ki-67, and PD-L1 were carried out to determine the frequency of DAT with IDH1 mutations. Results : Our study shown the frequency of IDH1 mutations in grade II 50.0% (7/14), grade III 37.5% (3/8), and grade IV 12.5% (1/8). Our study also showed a difference in Ki-67 and PD-L1 expression between each the degree of DAT histopathology (p=0.0001 and p=0.002, respectively). There was an association between both mutant IDH1 R132H, and Ki-67 with PD-L1 expression in DAT (p=0.0087 and p=0.0049, respectively). Conclusion : DAT with the mutant IDH1 is frequently observed in grade II and small number of grade III. The expression of wild type IDH1, Ki-67, and PD-L1 were found to be higher in high grade DAT (grade III and grade IV). There is a correlation between each of mutant IDH1 status and Ki-67 with PD-L1 expression in DAT.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.1
• /
• pp.79-85
• /
• 1994

All the activities and physical properties including surface tension' foaming power, foam stability, emulsifying power, dispersion effect of 3-(N, N-dimethyl N-alkylammonio)-2-hydroxyY-1-propane sulfonate (HSB)류와 3-CN-alkylamidopropyl-N,N-dimethylamm-onjo)-2-hydroxy-1-propane sulfonate (APSB) aquous solution were measured and critical micelle concentration was evaluated. Their cmc of hydroxy sulfobetaine derivatives evaluated by the surface tension method was $1.0{\times}10^{-3}{\sim}1.0{\times}10^{-4}$ mol/l, and surface tension of the aquous solution was decreased to $27{\sim}38dyne/cm$. The experimental results for foaming power, foam stability, emulsifying power in liquid paraffin showed a good surface active properties, especially, dispersion effect in ferric oxide exhibited some efficient surface active properties, and then it would be expected to application as detergent and dispersion agent.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.395-400
• /
• 2004

The effects of compositions of binders on the rheological properties of mixtures and the preparation conditions on the formation of defects and the debinding characteristics of compacts for the injection molding of ceramic powders (65 wt% aluminaㆍ35 wt% feldspar) were studied. Ceramic powders were coated with 2 wt% of stearic acid and then mixed with 15, 20, and 25 wt% of Paraffin Wax (PW) and High Density Polyethylene (HDPE) as binders at $160^{\circ}C$ for 2 h. Rheological properties were investigated by using capillary rheometer. Apparent viscosities of mixtures were 80∼300 Paㆍs at 1,000$s^{-1}$ of a shear rate, it was good for the injection molding and depending on the compositions of binders. Short shot was formed at 15H5P5 (the ratio of HDPE : PW=5 : 5 in 15 wt% of binders) compacts without injection pressures and any noticeable defects were not formed at 45 kgf/$cm^{2}$ in 20H5P5 compacts. PW and HDPE were removed by the solvent extraction and thermal debinding method. Thermal debinding of HDPE at $450^{\circ}C$ for 5 h, which followed the extraction of PW was using n-heptane solvent at $70^{\circ}C$ for 5 h. Continuous pores in compacts, which facilitate the removal of HDPE by the thermal debinding, were found to form in the compacts when PW was removed by the solvent extraction. The optimum composition of binder at which binder was removed by thermal debinding without defects while maintaining the compact strength was 20H5P5. Bulk density, porosity and 3-point bending strength of 20H5P5 compact sintered at 1,30$0^{\circ}C$ for 5 h were 2.8, < 3%, and 2,400 kgf/$cm^{2}$, respectively, and can be used as a structural materials.

• The Korean Journal of Cytopathology
• /
• v.9 no.1
• /
• pp.89-94
• /
• 1998

A case of fine needle aspiration cytology of an osteoclastic giant cell tumor of pancreas, which is an uncommon variant of ductal adenocarcinoma, is described. Aspirated tumor cells were characterized by three populations: (1) bland osteoclast like giant cells with multiple small, round nuclei with distinct nucleoli, and abundant cytoplasm, (2) Individually scattered or loosely clustered medium sized mononuclear tumor cells, having fine chromatin, smooth nuclear membrane, often prominent nucleoli, and high N/C ratio, (3) bland or atypical spindle shaped cells. Osteoid like lacy material was also seen on cell block section. The immunohistochemical studies using paraffin embedded cell block section showed positivities for vimentin and lysozyme in both giant and mononuclear turner cells. However, they were negative for cytokeratin, epithelial membrane antigen, S-100 protein, carcinoembryonic antigen, and p53.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1990.11a
• /
• pp.36-40
• /
• 1990

세라믹재료는 ductility가 작아 그 강도가 균열의 가혹성, 즉 크기와 모양에 의하여 결정되는 특징을 가지고 있다. 한편 마모는 표면에 균열을 생성시킬 수 있기 때문에 강도에 큰 영향을 미칠 수 있다. 그러나 지금까지 강도에 미치는 마모의 영향은 잘 밝혀져 있지 않다. 따라서 본 연구에서는 세라믹재료중에서도 물리적 성질들이 잘 알려져 있는 알루미나를 택하여 마모기구를 관찰하고 마모가 강도에 미치는 영향을 관찰하였다. 소결후 고온등방가압 처리된 알루미나 소결체를 입수하여 3mmX4mmX40mm크기의 굽힘시험시편으로 가공하였다. 두개의 4mmX40mm면중에서 한명을 diamond paste $1\mu m$까지 사용하여 polishing하였다. 시편의 polishing된 면위에 질화규소 볼을 올려 놓고, 하중을 가한 상태에서 볼을 와복운동시켰다. 시편위에 형성되는 마모흔적의 길이를 16mm이상이 되도록 하였다. 왕복속도는 약 2 헤르쯔도 하였다. 하중은 300, 600, 900N으로 하였다. 윤활유로는 paraffin oil을 사용하였다. 마모시험이 끝난 시편을 광학현미경 및 주사전자현미경으로 관찰한 후, 4-점굽힘시험하여 강도를 구하였다. 4-점굽힘시험시 외부 및 내부 지지점간의 거리는 30mm, 10mm로 하였으며, cross head speed는 분당 0.5mm로 하였다.