• Nanomaterials
• /
• v.12 no.17
• /
• pp.2945-2957
• /
• 2022

In this work, the growth of extended tri-s-triazine units (melem units) on g-C₃N₄ (CN) by hydrothermal treatment and its effect on the photodegradation efficiency of tetracycline hydrochloride (TC) is investigated. The CN-180-x and CN-200-6 samples were prepared using different hydrolysis times and temperatures, and they were characterized by multiple physicochemical techniques. In addition, their photodegradation performance was evaluated under visible light irradiation. Compared to the CN, CN-180-6 possesses remarkable photocatalytic degradation efficiency at 97.17% towards TC removal in an aqueous solution. The high visible-light-induced photo-reactivity of CN-180-6 directly correlates to charge transfer efficiency, numerous structural defects with a high specific surface area (75.0 m² g^-1), and sufficient O-functional groups over g-C₃N₄. However, hydrothermal treatment at a higher temperature or during a longer time additionally induces the growth of extended melem units on the surface of g-C₃N₄, resulting in the inhibition of the charge transfer. In addition, the superoxide radical is proven to be generated from photoexcited reaction and plays a key role in the TC degradation.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.497-507
• /
• 1996

The aim of present study in vitro was to evaluate and compare the effects of different washing times of enamels etched with low phosphoric acid solution which makes unsoluble salts and etched but contaminated with saliva on shear bond strength of an orthodontic adhesive to enamel, and to observe the washing effect on the etched enamel surface by scanning electron microscope. All brackets were bonded with Mono-$Lok2^{TM)}$) on the labial surface of extracted human bicuspids after etching with $20w/w\%\;and\;37w/w$ and phosphoric acid solution for 60seconds and then washing for 0,5,10 and 20seconds respectedly. After etching with $37w/w\%$ phosphoric acid solution and contaminating with saliva for 30seconds and then washing for 0,5,20 and 30seconds and re-etching for 10seconds. After 24hours passed in the $37^{\circ}C$ water bath, the shear bond strengths were measured on Universal Test Machine. The data were evaluated and tested by ANOVA and Duncan's multiple range test, and those results were as follows. 1. There was no significant differences between (p>0.05) shear bond strength of bonded brackets with 5, 10, 20seconds washing etched enamel using $37{\%}w/w{\%}$ phosphoric acid solution. 2. The shear bond strength of bonded brackets with $20w/w\%$ phosphoric acid and then washing for 5seconds showed bonded strength durable to occlusal force but its coefficiency score was high and etched surface was not cleaned completely and therefore it was assumed that its clinical application is not applicable. 3. There was no significant differences between (p>0.05) shear bond strengths of bonded brckets with washing for 5seconds etched enamel using $37w/w\%$ phosphoric acid solution and 10,20 seconds washing etched enamel using $20w/w\%$ phosphoric acid solution. 4. The shear bond strength of washing for 5seconds etched enamel which was contaminated with saliva showed sufficient bonded strength durable to occlusal force but its coefficiency score was high and therefore its clinical application was not applicable. 5. After etching, the sample contaminated with saliva showed the sufficient shear bond strength even washing 20seconds without re-etching.

• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.537-549
• /
• 1998

The purpose of this study was to evaluate the influence of root resection and retrograde cavity preparation methods on the apical leakage in endodontic surgery. To investigate the effect of various root resection and retrograde cavity preparation methods on the apical leakage, 71 roots of extracted human maxillary anterior teeth and 44 mesiobuccal roots of extracted human maxillary first molars were used. Root canals of the all the specimens were prepared with step-back technique and filled with gutta-percha by lateral condensation method. Three millimeters of each root was resected at a 45 degree angle or perpendicular to the long axis of the tooth according to the groups. Retrograde cavities were prepared with ultrasonic instruments or a slow-speed round bur, and occlusal access cavities were filled with zinc oxide eugenol cement. Three coats of clear nail polish were placed on the lateral and coronal surfaces of the specimens except the apical cut one millimeter. All the specimens were immerged in 2% methylene blue solution for 7 days in an incubator at $37^{\circ}C$. The teeth were dissolved in 14 ml of 35% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data were analysed statistically using two-way ANOVA and Duncans Multiple Range Test. The results were as follows: 1. No statistically significant difference was observed between ultrasonic retrograde cavity preparation method and slow-speed round bur technique, without apical bevel (p>0.05). 2. Ultrasonic retrograde preparation method showed significantly less apical leakage than slow-speed round bur technique, with bevel (p<0.0001). 3. No statistically significant difference was found between beveled resected root surface and non-beveled resected root surface, with ultrasonic technique (p>0.05). 4. Non-beveled resected root surface showed significantly less apical leakage than beveled resected root surface, with slow-speed round bur technique (p<0.0001). 5. No statistically significant difference in apical leakage was found between the group of retrograde cavity prepared parallel to the long axis of the tooth and the group of one prepared perpendicular to the long axis of the tooth (p>0.05). 6. Regarding isthmus preparation, ultrasonic retrograde preparation method showed significantly less apical leakage than slow-speed round bur technique, in the mesiobuccal root of maxillary molar, without bevel (p<0.0001).

• Journal of Plant Biotechnology
• /
• v.45 no.2
• /
• pp.110-116
• /
• 2018

This study was conducted to develop a simple, rapid, and reliable method for in vitro propagation of disease-free and true-to-type clones from sucker explants of thornless blackberry (Rubus fruticosus L. ${\times}$ R. parvifolius L.). To induce multiple shoots, the sucker explants were sterilized in 1% NaOCl solution, and then were aseptically cultured on the full and 1/2 MS solid medium supplemented with BAP (0.1, 0.5, 1.0, 2.0 mg/L). After six weeks of culture, the highest frequency (85.4%) of shoot formation from sucker explants was obtained on the full-strength MS medium with 1.0 mg/L BAP. Node explants obtained from multiple shoots were cultured on the various media of full- or half-strength of AD, B5, MS, SH, QL, WPM media, respectively. After 30 days of culture, plant growth was good on the half-AD, half-QL medium. After 90 days of culture, plant growth was good on the full MS and full SH medium. The survival rate of the plantlets after transfer to plastic pots containing soil mixture (sand: soil: vermiculite was 1:1:1, vol.) in the greenhouse was 98%. The results indicate that a multiple-shoot procedure can be applied for an efficient mass propagation of Rubus fruticosus L. ${\times}$ R. parvifolius L.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.166-179
• /
• 1999

Apical sealing is essential for the success of surgical endodontic treatment. Root-end cavity is apt to be contaminated with moisture or blood, and is not always easy to be dried completely. The purpose of this study was to evaluate the influence of dry methods of retrocavity on the apical seal in endodontic surgery. Apical seal was investigated through the evaluation of apical leakage and adaptation of filling material over the cavity wall. To investigate the influence of various dry methods on the apical leakage, 125 palatal roots of extracted human maxillary molar teeth were used. The clinical crown of each tooth was removed at 10 mm from the root apex using a slow-speed diamond saw and water spray. Root canals of the all the specimens were prepared with step-back technique and filled with gutta-percha by lateral condensation method. After removing of the coronal 2 mm of filling material, the access cavities were closed with Cavit$^{(R)}$. Two coats of nail polish were applied to the external surface of each root. Apical three millimeters of each root was resected perpendicular to the long axis of the root with a diamond saw. Class I retrograde cavities were prepared with ultrasonic instruments. Retrocavities were washed with physiologic saline solution and dried with various methods or contaminated with human blood. Retrocavities were filled either with IRM, Super EBA or composite resin. All the specimens were immersed in 2% methylene blue solution for 7 days in an incubator at $37^{\circ}C$. The teeth were dissolved in 14 ml of 35% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data were analysed statistically using one-way ANOVA and Duncan's Multiple Range Test. To evaluate the influence of various dry methods on the adaptation of filling material over the cavity wall, 12 palatal roots of extracted human maxillary molar teeth were used. After all the roots were prepared and filled, and retrograde cavities were made and filled as above, roots were sectioned longitudinally. Filling-dentin interface of cut surfaces were examined by scanning electron microscope. The results were as follows: 1. Cavities dried with paper point or compressed air showed less leakage than those dried with cotton pellet in Super EBA filled cavity (p<0.05). However, there was no difference between paper point- and compressed air-dried cavities. 2. When cavities were dried with compressed air, dentin-bonded composite resin-filled cavities showed less apical leakage than IRM- or Super EBA-filled ones (p<0.05). 3. Regardless of the filling material, cavities contaminated with human blood showed significantly more apical leakage than those dried with compressed air after saline irrigation (p<0.05). 4. Outer half of the cavity showed larger dentin-filling interface gap than inner half did when cavities were filled with IRM or Super EBA. 5. In all the filling material groups, cavities contaminated with blood or dried with cotton pellets only showed larger defects at the base of the cavity than ones dried with paper points or compressed air.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.118-127
• /
• 2006

The wireless transmission medium inherently broadcasts a signal to all neighbor nodes in the transmission range. Existing asynchronous MAC protocols do not provide a concrete solution for reliable broadcast in link layer. This mainly comes from that an omnidirectional broadcasting causes to reduce the network performance due to the explosive collisions and contentions. This paper proposes a directional broadcast protocol by using neighborhood information in the link layer based o,1 directional antennas, named MNDB (MAC protocol with Neighborhood for reliable Directional Broadcast). This protocol makes use of neighborhood information and DMACA (Directional Multiple Access and Collision Avoidance) scheme through 4-way handshake to support a reliable directional broadcast. To analyze its performance, MNDB protocol si compared with $RMDB^{[1]}$, the protocol 2 of reference [3], and IEEE 802.11 $protocol^{[9]}$, in terms of the number of collisions, the number of dropped packets, the number of redundant packets, and broadcast delay.

• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.176-183
• /
• 2001

Loblolly pine (Pinus taeda L.) is the most economically important timber producing species in the southern United States. Much attention has been given to predicting diameter distributions for the solution of multiple-product yield estimates. The three-parameter Weibull diameter distribution yield prediction systems were developed for loblolly pine plantations. A parameter recovery procedure for the Weibull distribution function based on four percentile equations was applied to develop diameter distribution yield prediction models. Four percentiles (0th, 25th, 50th, 95th) of the cumulative diameter distribution were predicted as a function of quadratic mean diameter. Individual tree height prediction equations were developed for the calculation of yields by diameter class. By using individual tree content prediction equations, expected yield by diameter class can be computed. To reduce rounding-off errors, the Weibull cumulative upper bound limit difference procedure applied in this study shows slightly better results compared with upper and lower bound procedure applied in the past studies. To evaluate this system, the predicted diameter distributions were tested against the observed diameter distributions using the Kolmogorov-Smirnov two sample test at the ${\alpha}$=0.05 level to check if any significant differences existed. Statistically, no significant differences were detected based on the data from 516 evaluation data sets. This diameter distribution yield prediction system will be useful in loblolly pine stand structure modeling, in updating forest inventories, and in evaluating investment opportunities.

• The Korean Journal of Applied Statistics
• /
• v.24 no.2
• /
• pp.411-424
• /
• 2011

The studies of congruence in organizational research have explored the concepts such as person-job fit person-organization fit, or person-environment fit. The relevant studies dealt with the fit level as an important influencing factor on the performance. In particular, researchers have agreed that employees can be motivated by the high level fit of person-organization. However, few research developing an alternative methodological approach has been done. For the purpose mentioned above the statistics like D, |D| or $D^2$ and the Q values such as Q(the correlation between two sets of interval measures) or $Q_r$(the correlation between two rankings) have been conventionally adopted in spite of numerous methodological problems. In general, these traditional indices such as difference scores, or Q values, are nondirectional and add an extra weight to differences of lager magnitude. Therefore, Edwards (1993) introduced the polynomial regression and the response surface analysis to overcome flaws with conventional approaches. However, the method-ological approaches did not reflect the profile characteristics of person-organizational value fit and wouldn't be a proper solution for the fit level of person-organization value maximizing performance. Hence, this paper investigates alternative methodological approaches, the multivariate polynomial regression and the multiple response surface analysis, to avoid the problems issued from conventional ways.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.29 no.3
• /
• pp.125-137
• /
• 1987

The purpose of this paper is to examine some difficulties in water management of agricultural reservoirs in Korea, for there are approximately more than 15,000 reservoirs which are now being utilized for the purpose of irrigation, along with the much amount of expenses and labors to be invested against droughts and floods periodically occurred. Recently, the effective use of water resources in the agricultural reservoirs with a single purpose, is becomming multiple according to the alterable environment of water use. Therefore, the task to allocate agricultural water rationally and economically must be solved for the multiple use of agricultural reservoirs. On the basis of the above statement, this study aims at suggesting the rational method of water management by introducing an optimal technique to allocate the water in an existing agricultural reservoir rationally, for the sake of maximizing the economic effect. To achieve this objective, a reservoir, called "0-Bongje" as a sample of the case study, is selected for an agricultural water development proiect of medium scale. As a model for the optimum allocation of water in the multi-purpose use of reservoirs a linear programming model is developed and analyzed. As a result, findings of the study are as follows : First, a linear programing model is developed for the optimum allocation of water in the multi-purpose use of agricultural reservoirs. By adopting the model in the case of reservoir called "O-Bongje," the optimum solution for such various objects as irrigation area, the amount of domestic water supply, the size of power generation, and the size of reservoir storage, etc., can be obtained. Second, by comparing the net benefits in each object under the changing condition of inflow into the reservoir, the factors which can most affect the yearly total net benefit can be drawn, and they are in the order of the amount of domestic water supply, irrigation area, and power generation. Third, the sensitivity analysis for the decision variable of irrigation which may have a first priority among the objects indicate that the effective method of water management can be rapidly suggested in accordance with a condition under the decreasing area of irrigation. Fourth, in the case of decision making on the water allocation policy in an existing multi-purpose reservoir, the rapid comparison of numerous alternatives can be possible by adopting the linear programming model. Besides, as the resources can be analyed in connection with various activities, it can be concluded that the linear programing model developed in this study is more quantitative than the traditional methods of analysis. Fifth, all the possible constraint equations, in using a linear programming model for adopting a water allocation problem in the agricultural reservoirs, are presented, and the method of analysis is also suggested in this study. Finally, as the linear programming model in this study is found comprehensive, the model can be adopted in any different kind of conditions of agricultural reservoirs for the purpose of analyzing optimum water allocation, if the economic and technical coefficients are known, and the decision variable is changed in accordance with the changing condition of irrigation area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.615-624
• /
• 2016

In this study, two rectangular barges in close proximity were simulated to analyze the characteristics of motion responses due to hydrodynamic interactions. Using a numerical solution from DNV-GL SESAM, coupled stiffness matrix terms for these same FEM models were added to the multiple body modes in the surge direction. Potential theory was used to calculate the first order radiation and diffraction effects on the simulated barge models. In the results, the sheltering effect of the barges was not shown at 1.3 rad/s with hull separation of 20 m in transverse waves. The separation effect between the barges was more clear with longitudinal waves and a shallow water depth. However, sway forces were influenced by hull separation with transverse waves. The peaks for sway and heave motion and sway force occurred at higher frequencies as hull separation narrowed with longitudinal and transverse waves. Given a depth of 10 m, the sway motion on the lee side of a coupled barge made a significant difference in the range of 0.2-0.8 rad/s with transverse and oblique waves. Also, the peaks for sway force were situated at lower frequencies, even when incident waves changed.