• Title/Summary/Keyword: multiple length scales

Search Result 14, Processing Time 0.025 seconds

High performance ultrafine-grained Ti-Fe-based alloys with multiple length-scale phases

  • Zhang, Lai-Chang
    • Advances in materials Research
    • /
    • v.1 no.1
    • /
    • pp.13-29
    • /
    • 2012
  • In order to simultaneously enhance the strength and plasticity in nanostructured / ultrafine-grained alloys, a strategy of introducing multiple length scales into microstructure (or called bimodal composite microstructure) has been developed recently. This paper presents a brief overview of the alloy developement and the mechanical behavior of ultrafine-grained Ti-Fe-based alloys with different length-scale phases, i.e., micrometer-sized primary phases (dendrites or eutectic) embedded in an ultrafine-grained eutectic matrix. These ultrafine-grained titanium bimodal composites could be directly obtained through a simple single-step solidification process. The as-prepared composites exhibit superior mechanical properties, including high strength of 2000-2700 MPa, large plasticity up to 15-20% and high specific strength. Plastic deformation of the ultrafine-grained titanium bimodal composites occurs through a combination of dislocation-based slip in the nano-/ultrafine scale matrix and constraint multiple shear banding around the micrometer-sized primary phase. The microstructural charactersitcs associated to the mechanical behaivor have been detailed discussed.

Dynamic analysis of magnetorheological elastomer sandwich MEMS sensor under magnetic field

  • Akhavan, Hossein;Ehyaei, Javad;Ghadiri, Majid
    • Smart Structures and Systems
    • /
    • v.29 no.5
    • /
    • pp.705-714
    • /
    • 2022
  • In this paper, the effect of magnetic field on the vibration behavior of a Magnetorheological elastomer (MRE) sandwich MEMS actuated by electrostatic actuation with conductive skins are examined within the multiple scales (MMS) perturbation method. Magnetorheological smart materials have been widely used in vibration control of various systems due to their mechanical properties change under the influence of different magnetic fields. To investigate the vibrational behavior of the movable electrode, the Euler-Bernoulli beam theory, as well as Hamilton's principle is used to derive the equations and the related boundary conditions governing the dynamic behavior of the system are applied. The results of this study show that by placing the Magnetorheological elastomer core in the movable electrode and applying different magnetic fields on it, its natural vibrational frequency can be affected so that by increasing the applied magnetic field, the system's natural frequency increases. Also, the effect of various factors such as the electric potential difference between two electrodes, changes in the thickness of the core and the skins, electrode length, the distance between two electrodes and also change in vibration modes of the system on natural frequencies have been investigated.

Carbon nanofiber-reinforced polymeric nanocomposites

  • Jang, Changwoon;Hutchins, John;Yu, Jaesang
    • Carbon letters
    • /
    • v.14 no.4
    • /
    • pp.197-205
    • /
    • 2013
  • Five vapor-grown carbon nanofiber (VGCNF) reinforced vinyl ester (VE) nanocomposite configurations were fabricated, imaged, and mechanically tested in order to obtain information on the influence and the interactions of the role of the microstructure at lower length scales on the observed continuum level properties/response. Three independent variables (the nanofiber weight fraction and two types of nanofiber mixing techniques) were chosen to be varied from low, middle, and high values at equally spaced intervals. Multiple mixing techniques were studied to gain insight into the effect of mixing on the VGCNF dispersion within the VE matrix. The point count method was used for both lower length-scale imaging techniques to provide quantitative approximations of the magnitude and the distribution of such lower length-scale features. Finally, an inverse relationship was shown to exist between the stiffness and strength properties of the resulting nanocomposites under uniaxial quasistatic compression loading.

Smart body armor inspired by flow in bone

  • Tate, Melissa Louise Knothe
    • Smart Structures and Systems
    • /
    • v.7 no.3
    • /
    • pp.223-228
    • /
    • 2011
  • An understanding of biomaterials' smart properties and how biocomposite materials are manufactured by cells provides not only bio-inspiration for new classes of smart actuators and sensors but also foundational technology for smart materials and their manufacture. In this case study, I examine the unique smart properties of bone, which are evident at multiple length scales and how they provide inspiration for novel classes of mechanoactive materials. I then review potential approaches to engineer and manufacture bioinspired smart materials that can be applied to solve currently intractable problems such as the need for "smart" body armor or decor cum personal safety devices.

Particle Tracking Microrheology and its application to dilute viscoelastic materials (입자추적 미세유변학의 묽은 점탄성 물질에 대한 응용)

  • Yim Yoon-Jae;Lee Sung-Sik;Ahn Kyung-Hyun;Lee Seung-Jong
    • Proceedings of the Korean Society of Rheology Conference
    • /
    • 2006.06a
    • /
    • pp.61-64
    • /
    • 2006
  • Soft materials, such as polymer solutions, gels and filamentous protein materials in cells, show complicated behavior due to their complex structures and dynamics with multiple characteristic time and length scales. Several complementary techniques have been developed to measure viscoelastic of soft materials. Especially, particle tracking microrheology, using the Brownian motion of particles in a medium to get rheological properties, has recently been improved both theoretically and experimentally. Compared to other conventional methods, video particle tracking microrheology has some advantages such as small sample volume, detecting spatial variation of local rheological properties, and less damage to sample materials. With these advantages, microrheology is more suitable to measure the properties of complex materials than other mechanical rheometries.

  • PDF

Determination of Design Channel Width for from Medium Rivers in Geum-River Basin (금강 유역내 중규모 하천의 계획하폭 산정)

  • Myeng, Bong-Jae;Lee, Jong-Seok;Cha, Young-Kee
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.7 no.1 s.24
    • /
    • pp.47-56
    • /
    • 2007
  • The parameters are determined analyzing the hydraulic and hydrological characteristics of design floods, watershed, channel length, and river bed slope. The models are calibrated while the input hydrologic data are the field data of middle size areas in Guem river basin in Korea. The basic equations of design width are suggested by the multiple regression analysis and the results show excelled in comparisons as well as calibrations with the existing empirical formulas and the design criteria, respectively. The basic equations of design width in validation process is determined the regression functions with the design floods, watershed, channel length, river bed slope as the four parameters using other database in the same scales watershed. As a results, this study will be used for apply to determine of design width and river alignmentof the watershed in hydraulic fields.

Two Morphotypes in Korean Striped Bitterlins, Acheilognathus yarnutsutae Mori (Cvprinidae, Pisces) (줄납자루 Acheilognathus yamatsutae Mori(잉어과, 어강)의 두 type)

  • Chae, Byung-Soo;Yang, Hong-Jun
    • The Korean Journal of Zoology
    • /
    • v.37 no.1
    • /
    • pp.49-57
    • /
    • 1994
  • In the course of an investigation on the morphological variation of Korean striped bittering, Acheilognathus vamatsutae Mori, two kinds of morrholoflical types were found. Some morphological characters were compared between them and multivariate analysis was conducted. Since the difference of the barbel length between them was very significant (p < 0.01,1-test), they should be designated as L-and 5-type Hshes: fishes with long barbels and those with should barbels, respectively. Lateral line scales, snout length and prepectoral length showed a tendency that the observation could be distinguished from each other (p < 0.05, Duncan's multiple range tests. There were no individuals over 70 mm BL in S-type and so S-type fishes were somewhat dwarf than L-type fishes. The two types were also clearly distinguished by multivariate analyses using cluster and discriminant analyses. According to the observation on the four populations of the Naktong River, the blue-green stripe on the body side and the white band on the margin of anal fin in males of S-type fishes were well developed through the year but those of males of L-type fishes completely disappeared or became slender during nonbreedins season as that of females. Of the seven localities surveved, there were no places that the two types cohabit. S-type fishes are limited only in the Kumho and Wichon River of the Naktong River system but L-type fishes are distributed more widely In the Hongchon, Mangvons, Somjin, Mirang and Panbyon River.

  • PDF

Loneliness and Life Satisfaction in Pneumoconiosis Patients Hospitalized in Long-term Care Facilities (요양기관에 입원중인 진폐증 환자에서 고독감과 삶의 만족도와의 연관성)

  • Bae, Moon-Hye;Choo, Ji-Na;Han, Keum-Sun
    • Korean Journal of Occupational Health Nursing
    • /
    • v.18 no.2
    • /
    • pp.185-193
    • /
    • 2009
  • Purpose: Loneliness may be a typical psychological consideration in chronically ill patients, linking with low life satisfaction. We aimed to determine if loneliness would be independently associated with life satisfaction in pneumoconiosis patients hospitalized in long-term care facilities. Methods: We recruited 164 patients from 3 pneumoconiosis-specialized hospitals in M and S cities, South Korea, and measured loneliness and life satisfaction by using the University of California Los Angeles loneliness and life satisfaction index-Z scales. The Multiple regression analysis was performed to examine an independent association between loneliness and life satisfaction after adjustment for age, the levels of dyspnea and bronchitis-emphysema symptom, length of institutionalization, marital status, previous coal work experience, perceived socioeconomic status, and presence of caregivers. Results: The mean of loneliness was 46.4. We found a significant association between loneliness and life satisfaction (standardized beta=-0.16, p=0.049), independent of all the covariates. Conclusions: Loneliness was an independent associate of life satisfaction in patients with pneumoconiosis who were institutionalized in long-term care facilities. Thus, a nursing intervention strategy for relieving loneliness is needed to increase life satisfaction in these patients.

  • PDF

Shape Characteristics of Exhaust Plume of Dual-Stage Plasma Thruster using Direct-Current Micro-Hollow Cathode Discharge (직류 마이크로 할로우 음극 방전을 이용한 이단 마이크로 플라즈마 추력기의 배기 플룸의 형상 특성)

  • Ho, Thi Thanh Trang;Shin, Jichul
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.20 no.3
    • /
    • pp.54-62
    • /
    • 2016
  • Micro plasma thruster (${\mu}PT$) was studied experimentally with a dual-stage micro-hollow cathode discharge (MHCD) plasma. Electrostatic-like acceleration exhibiting more directional and elongated exhaust plume was achieved by a dual layer MHCD at the total input power less than 10 W with argon flow rate of 40 sccm. V-I characteristic indicated that there was an optimal regime for dual-stage operation where the acceleration voltage across the second stage remained constant. Estimated exhaust plume length showed a similar trend to the analytic estimate of exhaust velocity which scales with an acceleration voltage. ${\mu}PT$ with multiple holes exhibited similar performance with single-hole thruster indicating that higher power loading is possible owing to decreased power through each hole. Boltzmann plot of atomic argon spectral lines showed average electron excitation temperature of about 2.6 eV (~30,170 K) in the exhaust plume.

Efficacy of laughing voice treatment (SKMVTT) in benign vocal fold lesions (양성성대질환의 웃음 음성치료(SKMVTT))

  • Jung, Dae-Yong;Wi, Joon-Yeol;Kim, Seong-Tae
    • Phonetics and Speech Sciences
    • /
    • v.10 no.4
    • /
    • pp.155-161
    • /
    • 2018
  • The purpose of this study was to evaluate the efficacy of a multiple voice therapy technique ($SKMVTT^{(R)}$) using laughter for the treatment of various benign vocal fold lesions. To achieve this, 23 female patients diagnosed with vocal nodules, vocal polyp, and muscle tension dysphonia through videostroboscopy were enrolled in vocal hygiene and $SKMVTT^{(R)}$. All of the patients were treated once a week for 4 to 12 sessions. The GRBAS scale was used to confirm the changes in voice quality before and after the treatment. Acoustic analysis was performed to evaluate jitter, shimmer, NHR, fundamental frequency variation, amplitude variation, PFR, and dB range. Videostroboscopy was performed to confirm the changes in the laryngeal features before and after the treatment. After the $SKMVTT^{(R)}$, the results of the perceptual evaluation demonstrated that the G, R, and B scales significantly improved. An acoustic evaluation also demonstrated that jitter, shimmer, NHR, vAm, vFo, PFR, and dB range also significantly improved after the $SKMVTT^{(R)}$. In comparison to the videostroboscopic findings, the size of the vocal nodules and vocal polyp decreased or disappeared after the treatment. In addition, the size of the cuneiform tubercles decreased, the length of the aryepiglottic folds became longer, and the laryngeal findings of the supraglottic compressions improved after the $SKMVTT^{(R)}$. These results suggest that the $SKMVTT^{(R)}$ is effective in improving the vocal quality of patients with benign vocal fold lesions. In conclusion, it seems that laughter and inspiratory phonation suppressed abnormal laryngeal elevation and lowered laryngeal height, which seems to have the effect of improving hyperfunctional phonation.