• 콘크리트학회지
• /
• 제9권2호
• /
• pp.133-144
• /
• 1997

2차원 응력상태의 철근콘크리트 부재해석을 위하여 소성이론과 파괴모델의 통합방법을 연구하였다. 콘크리트의 대별되는 두 가지 거동특성인 다차원 압축상태의 강도증가와 인장균열파괴를 동시에 나타내기 위하여, 압축파괴와 인장균열의 다중파괴기준을 사용하는 소성이론을 근간으로 여러 실험결과를 반영하는 파괴모델을 적용한다. 압축파괴기준으로서 Drucker-Prager모델과 von Mises 모델을 비교 사용하며 인장균열거동에 대하여 회전균열소성모델과 고정균열소성모델을 비교한다. 이러한 압축파괴기준과 이장균열파괴기준의 설정에는 다차원 압축상태의 강도증가, 균열로 인한 인장과 압축응력도의 저하, 보강철근의 영향등을 나타내는 실험식과 파괴에너지개념을 사용한다. 이 재료모델을 비선형유한요소해석에 사용하여 기존의 실험결과와 비교한다. 재료모델의 압축파괴와 인장균열거동을 검증하기 우하여 콘크리트의 압축파괴 또는 철근의 인장항복에 의하여 거동이 대별되는 실험들과 비교한다.

• 한국항해항만학회지
• /
• 제36권5호
• /
• pp.339-347
• /
• 2012

예인줄을 여러 개의 유한요소로 분할 한 뒤 각 요소들에 Newton의 운동 제 2법칙을 적용하고 각각에 작용하는 외력은 성분별로 장력, 항력, Coriolis 힘, 중력, 부력, 입수 충격력 등으로 구분하여 예선과 부선을 연결하는 예인줄의 동역학 모델을 정립하였다. 일반적으로 예인줄 요소의 병진 운동만을 고려하는 이전의 연구들과는 달리 본 논문에서는 예인줄 요소의 운동을 횡동요를 제외한 5자유도로 확장하고 외력 고려가 용이한 물체고정좌표계에서 기술하였다. 예인줄 요소들 간에는 연결점에서 인장만 되는 스프링과 감쇠기로 연결하고, 스프링의 강성계수는 실제 적용되는 예인줄의 강성계수와 등가가 되도록 설정하였다. 정립된 예인줄 모델의 검증을 위하여 예인줄의 공기중 및 수면 바로 위에서의 자유낙하, 예인선의 가속운동, 예인선의 조화운동 시나리오에 대하여 시뮬레이션을 수행하였다. 시뮬레이션 결과, 예인선, 부선, 예인줄 요소들의 운동 시계열 값들은 실제 예상치와 유사한 경향을 보이는 것을 확인하였다.

• Steel and Composite Structures
• /
• 제27권1호
• /
• pp.27-33
• /
• 2018

In this study, a mixed-interpolated tensorial component 4 nodes method (MITC4) is treated as a numerical analysis model for topology optimization using multiple materials assigned within Reissner-Mindlin plates. Multi-material optimal topology and shape are produced as alternative plate retrofit designs to provide reasonable material assignments based on stress distributions. Element density distribution contours of mixing multiple material densities are linked to Solid Isotropic Material with Penalization (SIMP) as a design model. Mathematical formulation of multi-material topology optimization problem solving minimum compliance is an alternating active-phase algorithm with the Gauss-Seidel version as an optimization model of optimality criteria. Numerical examples illustrate the reliability and accuracy of the present design method for multi-material topology optimization with Reissner-Mindlin plates using MITC4 elements and steel materials.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1120-1131
• /
• 2011

Researches using time reversal acoustics(TRA) for impact localization have been paid attention to recently. Dispersion characteristics of Lamb waves, which restrict the utility of classical nondestructive evaluation based on time-of-flight information, can be compensated through the application of TRA to Lamb waves on a plate. This study investigates the spatial focusing performance of time reversal Lamb waves on a plate using finite element analysis. In particular, the virtual sensor effect caused by multiple wave reflections at the boundaries of a plate is shown to enable the spatial focusing of Lamb waves though a very small number of surface-bonded piezoelectric(PZT) sensors are available. The time window size of forward response signals, are normalized with respect to the number of virtual active sensors. Then their effects on the spatial focusing performance of Lamb waves are investigated.

• 전산구조공학
• /
• 제10권2호
• /
• pp.213-223
• /
• 1997

탄성파의 변형 및 응력계산에 관한 연구는 비파괴검사를 비롯하여 광범위한 공학분야에서 중요한 역할을 하고 있다. 특히 파형의 산란문제가 많은 연구자들에 의해 다양한 방법으로 연구되고 있다. 실린더 또는 구와 같은 간단한 형상을 지닌 산란체에 대하여, 정상상태 탄성파의 산란문제의 해석은 해석적 기법을 이용한 연구가 가능하다. 하지만 임의의 형상을 갖는 산란체 또는 다수의 함유체에 대한 해석에는 수치해석방법이 요구된다. 예를 들면, 무한요소법 또는 Global-Local 유한요소법이라고 하는 혼성 유한요소법과 같은 특수한 유한요소법등이 개발되고 있다. 최근에는 경계요소법을 사용한 산란문제의 해석에 대한 연구가 진행되고 있다. 본 논문에서는 다수의 임의의 형상을 갖는 함유체, 공동 또는 크랙을 포함하고있는 무한고체에서의 일반적인 탄성동력학 문제를 해석하기 위해 새롭게 개발된 체적적분 방정식법을 소개한다. 또한 경계요소법을 사용하여 탄성파의 산란문제에 대한 수치해석을 수행하였으며, 이의 결과를 체적적분 방정식법의 결과와 비교 검토 하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1628-1633
• /
• 2016

This paper derives an effective shape of the ferromagnetic pole pieces (low-speed rotor) for the reduction of transmission torque ripple in a magnetic-geared machine based on a Box-Behnken design (BBD). In particular, using a non-linear finite element method (FEM) based on 2-D numerical analysis, we conduct a numerical investigation and analysis between independent variables (selected by the BBD) and reaction variables. In addition, we derive a regression equation for reaction variables according to the independent variables by using multiple regression analysis and analysis of variance (ANOVA). We assess the validity of the optimized design by comparing characteristics of the optimized model derived from a response surface analysis and an initial model.

• 한국해양공학회지
• /
• 제20권6호
• /
• pp.82-87
• /
• 2006

Numerical analysis is performed on the wave transmission coefficient of various crown widths of the double-submerged breakwater and the triple-submerged breakwater, varying the distance between submerged breakwaters. The finite element method is used, and the fluid motion is considered as linearized two-dimensional potential flow. In case of the double- and triple-submerged breakwaters, as the width of submerged breakwater increases, the minimum wave transmission coefficient decreases and the wave period at which the minimum wave transmission coefficient occurs moves to a longer wave period the distance between submerged breakwaters at which the minimum wave transmission coefficient occurs becomes larger.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1369-1378
• /
• 2017

The present paper reports the development of a computational code based on the Adaptive Group of Ink Drop Spread (AGIDS) for reconstruction of the neutron noise sources in reactor cores. AGIDS algorithm was developed as a fuzzy inference system based on the active learning method. The main idea of the active learning method is to break a multiple input-single output system into a single input-single output system. This leads to the ability to simulate a large system with high accuracy. In the present study, vibrating absorber-type neutron noise source in an International Atomic Energy Agency-two dimensional reactor core is considered in neutron noise calculation. The neutron noise distribution in the detectors was calculated using the Galerkin finite element method. Linear approximation of the shape function in each triangle element was used in the Galerkin finite element method. Both the real and imaginary parts of the calculated neutron distribution of the detectors were considered input data in the developed computational code based on AGIDS. The output of the computational code is the strength, frequency, and position (X and Y coordinates) of the neutron noise sources. The calculated fraction of variance unexplained error for output parameters including strength, frequency, and X and Y coordinates of the considered neutron noise sources were $0.002682{\sharp}/cm^3s$, 0.002682 Hz, and 0.004254 cm and 0.006140 cm, respectively.

• 한국군사과학기술학회지
• /
• 제23권4호
• /
• pp.319-327
• /
• 2020

In this study a methodology to evaluate fatigue life of the electronic parts for the fighter radar unit under random vibration loading is presented. To do this, one parameter for the 3-σ RMS quation of Steinberg fatigue model is modified to come up with a printed circuit board(PCB) with multiple electronic parts, while fundamental frequency and dynamic deflection of the PCB are calculated from a MATLAB based finite element computer code. For the RIFA structure selected in this study, the 3-σ RMS fatigue limit displacement is reduced to 0.741 times as much as the Steinberg model. This investigation allows to assess the life of multiple electronic parts mounted on the PCB with reinforced metal cover/body showing non-sinusoidal deflection patterns.

• Structural Engineering and Mechanics
• /
• 제10권1호
• /
• pp.81-92
• /
• 2000

This study is an investigation of the effect of cracks on the dynamical characteristics of a cantilever beam, having multiple open-edge transverse cracks. The flexibilities due to crack have been identified for several crack depths and locations. In the study the finite element method and component mode synthesis methods are used. Coupling the components is performed by a flexibility matrix taking into account the interaction forces. Each component is modelled by cantilever beam finite elements with two nodes and three degrees of freedom at each node. The results obtained lead to conclusion that, by using the drop in the natural frequencies and the change in the mode shapes, the presence and nature of cracks in a structure can be detected. There is some counter-evidence, however, that the effects due to multiple cracks may interact to make detection more difficult than for isolated cracks.