• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.96-102
• /
• 2023

In this paper, we proposed Channel Transfer Function estimation based on Delay and Doppler Profile for underwater acoustic OFDM communication system. It improved the estimation accuracy of the channel transfer function by linear time interpolation the change of Scattered Pilot (SP) insertion frequency in the time direction and the time by Delay and Doppler profile that analyzes the multipath situation of the channel investigated the performance of interpolation by simulation and report it. Previous works is inserted SP every 4 OFDM. It was effective under the environment without multipath, but it has observed that the effect of CTF compensation has been lowered in multipath channel condition. In addition to be better when inserted SP every 2 OFDM. But the amount of sending data will be decrease. Therefore, we conducted research to improve 4 OFDM with new interpolator. A computer simulation was performed as a comparison of SP inserted every 4 OFDM, SP inserted every 2 OFDM, and 4 OFDM with new interpolator. the performance of the proposed system is overwhelmingly improved, and the performance is slightly improved even 64 QAM.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.12
• /
• pp.4099-4113
• /
• 2022

In this paper, we propose improved maximum access delay time, noise variance, and power delay profile (PDP) estimation schemes for orthogonal frequency division multiplexing (OFDM) system in multipath fading channels. To this end, we adopt the approximate maximum likelihood (ML) estimation strategy. For the first step, the log-likelihood function (LLF) of the received OFDM symbols is derived by utilizing only the cyclic redundancy induced by cyclic prefix (CP) without additional information. Then, the set of the initial path powers is sub-optimally obtained to maximize the derived LLF. In the second step, we can select a subset of the initial path power set, i.e. the maximum access delay time, so as to maximize the modified LLF. Through numerical simulations, the benefit of the proposed method is verified by comparison with the existing methods in terms of normalized mean square error, erroneous detection, and good detection probabilities.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.55-61
• /
• 2007

In this paper, we represent the maximum detection probability formulas of symbol synchronization timing at each received delay signal in multipath channel delay profile in the multiplied correlation and difference type correlated symbol synchronization timing detection method. The computer simulation results show that the correlation symbol timing detection method have maximum detection probability at the lead of received delay signal of highest amplitude, but the difference type of correlation symbol timing detection method always have maximum detection probability at the lead of first received delay signal in the multipath channel models. Using this results, we show the BER characteristics difference between the IEEE802.11a OFDM signals which is obtained in case of the symbol synchronization timing is taken at zero error(perfect) timing position and at -1 sample error symbol timing position from perfect timing position in the multipath channel models regardless the length of channel delay spread.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.46-54
• /
• 2007

In this paper, we introduce the performance of improved symbol timing detection by the superposed difference type symbol timing detection method in the OFDM system. Also, we represent the maximum detection probability of symbol synchronization timing at each received delay signal in multipath channel delay profile in the correlation and difference type symbol timing detection methods. The computer simulation results show that the correlation symbol timing detection method have maximum detection probability at the lead of the nth received delay signal of highest amplitude, but the difference type symbol timing detection method always have maximum detection probability at the lead of the first received delay signal in the channel delay spread of $70nsec{\sim}217nsec$. The simulation results indicate the possibility of the perfect detection of OFDM symbol synchronization timing and it fit well with the results of improved S/N to the eb/n0 and the performance of symbol timing detection of the proposed method.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.85-90
• /
• 2001

In this paper, we analyzed the envelope correlation of wideband signals modulated on two separate subcarriers in a Nakagami-Rice fading channel with exponential power delay profile. The results show that the envelope correlation of resolvable paths is implicated by the ratio of the specular wave power to the mean multipath power as well as the signal bandwidth and the rms delay spread of the multipath waves.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.56-65
• /
• 2006

In this paper, we introduce modified difference type symbol timing detection method of simple structure and show the relations between S/N ratio and timing detection performance which less influenced by multipath channel delay profile and added noise level and it show very exact GI detection performance characteristics. In the computer simulations, 4 symbol time duration of short and long training of IEEE802.11a standard OFDM frame are used for symbol synchronization timing detection. The computer simulation results show the very exact symbol timing detection performance characteristic within 1 sample error of OFDM signal regardless channel delay profile from minimn phase channels of phase rotation ${\pi}/2$ to non-minimum phase channels of phase rotation ${\pi}/2$ of received OFDM signal and added noise level in channel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.9-14
• /
• 2008

In this paper, we propose the channel sounding scheme which is made for ideal communication between some application as well as the short distance of high speed data transmission in MIMO-OFDM system for Wireless PAN. This method is able to perceive the duration of the impulse response through the delaying of power delay profile, modeled a power delay profile which has an attenuate characteristic, and obtained the coefficient of channel response by ML (maximum likelihood). Through the amplitudes, phases and delays associated with each multipath component which were acquired from this channel sounding scheme, we can describe the wave propagation characteristics of channels between the transmitter and receiver so that the receiver could enhance not only the reliability but also the ability of communication link.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.454-460
• /
• 2007

In this paper, we implemented a ray-tracing simulator with a ray-launching technique and generated the propagation path of each ray in an multiple-wall indoor environment. In this simulator, we adopted two dimension ray-tracing techniques considering the reflection and penetration were dominant propagation factor in the indoor channel. From the result, we verified that this ray-tracing simulator shows the similar pattern and delay distribution with the experiment results of the previous research.

• Journal of Digital Contents Society
• /
• v.8 no.4
• /
• pp.459-465
• /
• 2007

In this paper, we implemented a ray-tracing simulator with a ray-launching technique and generated the propagation path of each ray in a multiple-wall indoor environment. In this simulator, we adopted two dimension ray-tracing techniques considering the reflection and penetration were dominant propagation factor in the indoor channel. From the result, we verified that this ray-tracing simulator shows the similar path pattern and delay distribution with the experiment results of the previous research. Especially, impulse responses of the ray were corresponding to reference result in non-line of sight of multiple-wall indoor environment. Furthermore, we confirmed that channel profiles having respectively different departure angle 1 degree to 7 degree were similar between them.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.219-222
• /
• 2004

There are several factors that disturb an Ultra-Wideband (UWB) radio propagation in an indoor environment such as path loss, shadowing and multipath fading. These factors directly affect the quality of the received signal. In this paper, we investigated the influence of the human body shadowing on UWB propagation based on measured wireless channel in an anechoic chamber. The characteristics of the UWB channel including the transmitter and the receiver antenna effects are acquired over the frequency bandwidth of 3${\sim}$11 GHz. The major factors such as the power delay profile (PDP), the angular power distribution (APD), the pulse distortion and the RMS delay spread caused by the human body shadowing are presented.