• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.635-638
• /
• 2004

페로브스카이트 구조를 가지는 $CaZrO_3$ 유전체 세라믹스에 $CaTiO_3$를 부피 비율로 첨가하여 첨가량 변동에 따른 마이크로파 유전 특성을 조사하였다. 또한 저온 동시소성 기능성 LTCC 기판용 유전체 소재로서 활용하기 위하여 저융점의 borosilicate계 유리 프리트를 첨가하여 $CaZrO_3-CaTiO_3$ 복합 유전체 세라믹스의 저온 소결 거동과 마이크로파 유전 특성을 평가하였다. 알칼리가 첨가된 저융점의 borosilicate계 유리 프리트를 $10\sim30$ wt% 범위로 첨가함으로서 $CaZrO_3-CaTiO_3$ 복합 유전체 세라믹스의 소결온도를 $1450^{\circ}C$에서 $900^{\circ}C$이하로 낮출 수 있었으며, 유리 프리트의 첨가량으로 공진 주파수 온도계수 특성을 조절할 수 있었다. 유리 프리트의 첨가량이 15 wt% 첨가시 $875^{\circ}C$에서 충분한 소결이 이루어졌으며, 이 경우 $CaZrO_3-CaTiO_3$ 복합 유전체 세라믹스는 유전율(k) 23, 품질계수(Qxf) 2500, 공진 주파수 온도계수 ($\tau_{cf}$) -3 ppm/$^{\circ}C$의 매우 양호한 마이크로파 유전 특성을 나타내었다. 유리 프리트의 첨가에 의하여 소결 과정에서 주상인 $CaZrO_3$가 $CaZr_4O_9$ 상으로의 변화가 뚜렷이 나타났는데, 이러한 상전이 현상과 함께 미세구조의 변화에 대해서도 고찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.714-717
• /
• 2004

알루미노 보로실리케이트계 유리 기본조성 중 알칼리 토류 산화물의 종류 및 함량 변화에 따른 저유전율/저 LTCC 배선 기판의 저온 소성 거동 및 유전 특성을 조사하였다 알칼리 토류 산화물의 종류 및 함량 변화를 통해서 LTCC의 적정 소성온도인 $875^{\circ}C$ 부근을 포함하는 넓은 대역으로 소성수축이 시작되는 온도를 제어할 수 있었으며 유리 프리트와 알루미나 필러의 배합 비율의 변화에 따른 소성거동 및 유전특성의 변화 거동을 조사하였다. 알칼리 토류 산화물 중 유리 조성내의 CaO의 함량이 증가할수록 유리전이점 및 연화점을 증가하는 경향을 보였으며, 알루미나 필러의 첨가량이 증가할수록 소성수축이 시작되는 온도영역은 상향되고 유전율 및 품질계수는 증가하였다. 알칼리 토류 산화물의 조성과 필러인 알루미나의 함량을 제어함으로서 $875^{\circ}C$에서 18% 이상의 선수축율과 유전율 $5.1\sim5.5$ 및 유전손실 0.1% 이하의 우수한 특성을 갖는 저온소결용 LTCC 배선 기판을 얻을 수 있었다.

• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.804-809
• /
• 1999

Silica films were prepared on Si single crystal substrates by a sol-gel process without DMF using TEOS as a starting material. Films were fabricated by spin coating technique. For films having a composition of TEOS : HCI(1:0.05mol), gelation time, the thickness of films, the formation of cracks and the microstructure of the films were investigated as a function of the molar ratio of $CH_3OH and H_2O$. With 8mol $CH_3OH$, the longest gelation time was measured to be 640hr. The thickness of the coated films was decreased with increasing content of $CH_3OH$. The films were sintered at $500^{\circ}C$ for 1hr with a heating rate of $0.6^{\circ}C$/min. The coated films showed worm-like grains and partially cracked microstructures at an amount of $CH_3OH$ 2mol and 4mol. The addition of more than 8 mole of $CH_2OH$ resulted in crack-free silica films. This suggests that crack-free films can be fabricated by controlling the surface tension energy of the sol solutions without DMF.

• Macromolecular Research
• /
• v.12 no.6
• /
• pp.564-572
• /
• 2004

Modem applications could benefit from multifunctional materials having anisotropic optical, electrical, thermal, or mechanical properties, especially when coupled with locally controlled distribution of the directional response. Such materials are difficult to engineer by conventional methods, but the electric field-aided technology presented herein is able to locally tailor electroactive composites. Applying an electric field to a polymer in its liquid state allows the orientation of chain- or fiber-like inclusions or phases from what was originally an isotropic material. Such composites can be formed from liquid solutions, melts, or mixtures of pre-polymers and cross-linking agents. Upon curing, a 'created composite' results; it consists of these 'pseudofibers' embedded in a matrix. One can also create oriented composites from embedded spheres, flakes, or fiber-like shapes in a liquid plastic. Orientation of the externally applied electric field defines the orientation of the field-aided self-assembled composites. The strength and duration of exposure of the electric field control the degree of anisotropy created. Results of electromechanical testing of these modified materials, which are relevant to sensing and actuation applications, are presented. The materials' micro/nanostructures were analyzed using microscopy and X-ray diffraction techniques.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.65-68
• /
• 2004

A new multifunctional sandwich composite was investigated in this paper. The honeycomb core of this composite was filled with viscoelastic material in order to obtain an improved impact performance. The fillings in the honeycomb cells was hoped to provide the act of energy dissipation in this combined material system. Low-velocity drop-weight test was set up to the specimens with various stacked carbon/epoxy laminate facesheets, $[0/90]_{4s},\;[0/45/-45/90]_{2s}$. Load and energy history were checked and compared for the both groups of specimens, with and without rubber fillings. Further, the damaged faces were inspected visually by ultrasonic C-scan.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.876-880
• /
• 2001

The supported and unsupported boehmite ($\gamma$-AlOOH) membranes were prepared using a boehmite sol. The supported membrane was consisted of a porcelain support, two intermediate $\alpha-{Al_2}{O_3}$ layers, and a top boehmite membrane. XRD patterns showed that the supported top membrane had a higher $\theta-$ to $\alpha-{Al_2}{O_3}$ transformation temperature compared to the unsupported membrane. This result was also confirmed from microstructural study of the membrane. The shift in the phase transformation temperature should be explained by difference of a stress generated in the supported top membrane due to interaction between the support layers and the top membrane.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.348-348
• /
• 2008

In recent, the concept of system-on-package (SOP) for highly integrated multifunctional systems has been paid attention to for the miniaturization and high frequency of electronic devices. In order to realize SOP, co-integration of passive devices, such as capacitors, resistors and inductors, and active devices should be achieved. If ceramic thick films can be grown at room temperature, we expect to be able to overcome many problems in conventional fabrication processes. So, we focused on the aerosol deposition method (ADM) as room temperature fabrication technology. ADM is a novel ceramic coating method based on the Room Temperature Impact Consolidation (RTIC) phenomena. This method has a wide range potential for fabrication of co-integration of passive and active devices. In this paper, I will present the future potential of ADM introducing various ceramic dielectric thick films for the integration of electronic ceramics.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.7-14
• /
• 2008

Carbon nanotubes are considered as the most ideal nano filler in the field of composites with their excellent electrical, mechanical, and thermal properties. Therefore carbon nanotubes composites are increasingly utilized in conductive materials, structural material with high strength and low weight and multifunctional material. This review article describes recent research trend of carbon nanotubes synthesis, modification, various properties of the carbon nanotubes composites and their application. Furthermore the future development direction for the commercialization of carbon nanotubes composites is proposed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.426-427
• /
• 2005

This research describes a new constructing method of multifunctional biosensor using many kinds of biomaterials. A metal particle and an array was fabricated by photolithographic. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by magnetic force interaction and self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence and electrochemical methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.404-405
• /
• 2006

Microarray-based DNA chips provide an architecture for multi-analyte sensing. In this paper, we report a new approach for DNA chip microarray fabrication. Multifunctional DNA chip microarray was made by immobilizing many kinds of biomaterials on transducers (particles). DNA chip microarray was prepared by randomly distributing a mixture of the particles on a chip pattern containing thousands of m-scale sites. The particles occupied a different sites from site to site. The particles were arranged on the chip pattern by the random fluidic self-assembly (RFSA) method, using a hydrophobic interaction for assembly.