• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.865-870
• /
• 1998

We propose a multifunctional power line compensator (PLC) which can individually compensate multiple impediments at the same time. The PLC has the flexibility to share power to each compensation according to commands, this improving the working rate. We constructed a 100kVA PLC model including a controller with digital signal processor (DSP) to realize a multifunctional compensation were obtained.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.180-181
• /
• 2014

Optically translucent Sialon ceramics was fabricated by hot pressed sintering method. The Sialon ceramics was laser textured and their tribological performance was observed. Starved lubrication method was applied on Sialon ceramics with different dimple spacing under a load of 10N and at room temperature. The material having high dimple spacing ($200{\mu}m$) shows low coefficient of friction. The material shows mild wear and therefore, wear rate of steel ball (meeting partner) was observed to measure wear rate. Different phases Sialon ceramics were analyzed by XRD patterns. Moreover, the mechanical properties of the Sialon ceramics were observed.

• 한국세라믹학회지
• /
• 제38권4호
• /
• pp.314-318
• /
• 2001

SiC-TiC composites have been fabricated by using a mechanochemical processing of a mixture of Si, Ti, and C at room temperature and subsequent hot pressing. TiC powders have been obtained by the mechanochemical processing of a mixture of Ti and C whereas SiC powders has not been obtained from a mixture of Si and C. By using the exothermic reaction between Ti and C, SiC-TiC powder could be obtained from the mixture of Si, Ti, and C using the mechanochemical processing for more than 12h. The X-ray diffraction analysis has shown that the powder subjected to the mechanochemical processing consisted of the particles having crystallite size below 10nm. Fully densified SiC-TiC composites have been obtained by hot-pressing of the powder at 1850$\^{C}$ for 3h and it has shown comparable mechanical properties to those of the SiC-TiC composites prepared from the commercially available SiC and TiC powders. Flexural strength of 560 MPa and fracture toughness of 4.8 MP$.$am$\_$1/2/ have been shown for the SiC-TiC composites with composition corresponding to 0.75:0.25:1 mole ratio of Si:Ti:C.

• 한국가구학회지
• /
• 제28권1호
• /
• pp.16-26
• /
• 2017

In today's aging society, stable residential environment is essential for the elderly living alone to be able to do activities of daily living without restrictions and cherish a satisfactory quality of life. We developed a safe and convenient multifunctional sofa by removing complex combinations and decomposing processes of the multifunctional transformable furniture, appropriate for the use by elderly living alone. We deduced the 4 main keywords and details related to the purpose of sofa by analyzing the users' physical and mental characteristics through literature review and by using 24-hour scheduling, interviews, and actual measurement. Finally, by applying this to furniture planning, we designed 4 different types of multifunctional sofa system. Production was done in cooperation with AND Co. for 2 weeks using materials, colors and adhesives selectively chosen with careful consideration of their effects on the physical, mental aspects of the user to give optimal comfortability.

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.463-470
• /
• 2019

Fe₃O₄/SiO₂/YVO₄:Eu³⁺ multifunctional nanoparticles are successfully synthesized by facile stepwise sol-gel processes. The multifunctional nanoparticles show a spherical shape with narrow size distribution (approximately 40 nm) and the phosphor shells are well crystallized. The Eu³⁺ shows strong photoluminescence (red emission at 619 nm, absorbance at 290 nm) due to an effective energy transfer from the vanadate group to Eu. Core-shell structured multifunctional nanoparticles have superparamagnetic properties at 300 K. Furthermore, the core-shell nanoparticles have a quick response time for the external magnetic field. These results suggest that the photoluminescence and magnetic properties could be easily tuned by either varying the number of coating processes or changing the phosphor elements. The nanoparticles may have potential applications for appropriate fields such as laser systems, optical amplifiers, security systems, and drug delivery materials.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.1-1
• /
• 2011

We developed a new generalized synthetic procedure, called as "heat-up process," to produce uniform-sized nanocrystals of many transition metals and oxides without a size selection process. We were able to synthesize uniform magnetite nanocrystals as much as 1 kilogram-scale from the thermolysis of Fe-oleate complex. Clever combination of different nanoscale materials will lead to the development of multifunctional nano-biomedical platforms for simultaneous targeted delivery, fast diagnosis, and efficient therapy. In this presentation, I would like to present some of our group's recent results on the designed fabrication of multifunctional nanostructured materials based on uniform-sized magnetite nanoparticles and their medical applications. Uniform ultrasmall iron oxide nanoparticles of <3 nm were synthesized by thermal decomposition of iron-oleate complex in the presence of oleyl alcohol. These ultrasmall iron oxide nanoparticles exhibited good T1 contrast effect. In in vivo T1 weighted blood pool magnetic resonance imaging (MRI), iron oxide nanoparticles showed longer circulation time than commercial gadolinium complex, enabling high resolution imaging. We used 80 nm-sized ferrimagnetic iron oxide nanocrystals for T2 MRI contrast agent for tracking transplanted pancreatic islet cells and single-cell MR imaging. We reported on the fabrication of monodisperse magnetite nanoparticles immobilized with uniform pore-sized mesoporous silica spheres for simultaneous MRI, fluorescence imaging, and drug delivery. We synthesized hollow magnetite nanocapsules and used them for both the MRI contrast agent and magnetic guided drug delivery vehicle.

• 패션비즈니스
• /
• 제6권4호
• /
• pp.46-61
• /
• 2002

The purpose of this study was to analyze critical needs and demands for the multifunctional traveler's jacket and to develop design prototypes based on the findings from the analysis. A self-report questionnaire with the stimuli was applied. Total 163 travelers were purposively sampled for the survey and the data were analyzed quantitatively as well as qualitatively. The results were as follows: 1. The respondents were divided into three groups - "digital-functionality-needs group", "non-digitalfunctionality-needs group", "no-need group", according to their preference and needs for the multifunctional traveler's jacket. 2. The three groups were analyzed (1) to have meaningful differences in experiencing inconvenience in their traveling, (2) to have statistically significant differences in their needs for the multifunctional traveler's jacket, (3) while some imperative consensus in their needs were found in part. 3. Based on the findings of the analysis mentioned above, three design prototypes were developed and visualized with conclusion.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.646-650
• /
• 2012

Multifunctional structures with two kinds of materials have been intensively investigated in order to improve their electrical characteristic with two functions simultaneously. However, the research regarding of multifunctional ceramic sensor is still in a preliminary stage and how to integrate them with low-cost and high-yield mass production process remains a challenge issue. In this study, we fabricated the multifunctional ceramic sensor composed of temperature and gas sensors. Moreover, we investigated the CO sensing properties of three dimensional nanostuctured $Nb_2O_5$ thin film gas sensors fabricated with silica ($SiO_2$ nanosphere (${\O}$= 750 nm). Compared to plain films, the nanostructured films show enhanced gas sensing of greater sensitivity and a faster response. This result reveals that significantly increased sensitivity is an increase in the effective surface area for the adsorption of gas molecules.

• 통합자연과학논문집
• /
• 제9권2호
• /
• pp.86-93
• /
• 2016

The peptide sequences, GHK(Gly-His-Lys) and KTTKS(Lys-Thr-Thr-Lys-Ser), using a collagen stimulator recently were manipulated at N-terminal as a multifunctional peptide derivative with PEG(polyethyleneglycol) linker connected to gallic acid which presents anti-inflammatory activity. The multifunctional peptide derivatives were obtained in a normal peptide preparation method through SPPS(solid phase peptide synthesis) using Fmoc chemistry and a carboxyl group insertion reaction of PEG-3,4,5-triacetoxy benzoate by using potassium tert-butoxide and ethyl bromoacetate, which was separated by Sephadex DEAE. It gave a good compromise to a cosmetic application for cell cytotoxicity, anti-wrinkle, and anti-inflammation.

• 한국결정학회지
• /
• 제17권1호
• /
• pp.14-18
• /
• 2006

MOCVD 공정방법에 의해 수직정렬된 ZnO 나노선을 합성하고 공정조건 제어에 의해 합성되는 나노선의 물리적, 광학적 특성이 어떻게 변화하는지를 고찰하고자 하였다. 온도 및 산소분압제어 등의 공전변수 제어를 통하여 ZnO 나노 구조체는 나노선, 나노로드 뿐만 아니라 나노바늘 (nano-needle) 등 다양한 구조로 변화되었으며 그 직경 및 길이도 제어가 가능하였다. 전체적으로 양호한 특성의 wurzite 구조를 나타내었으며 기판에 수직인 방향으로 [0001] 방향으로 성장하였다. 광학특성에서는 나노선 직경이 작아질수록 주방출 피크의 천이현상이 관찰되었다.