• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.885-890
• /
• 2003

The Core Base Tree (CBT) multicast routing architecture is a multicast routing protocol for the internet. The CBT establishes a single shared tree for a multicast connection. The shared tree Is rooted at a center node called core. The location of the core may affect the cost and performance of the CBT. The core placement method requires the knowledge of the network topology In this Paper, we propose a simple and effective method for selecting the core. This method requires the distance vector information. in addition, we used results that calculated sample correlation coefficient. And then we select suitable routing algorithm according to member's arrangement states in muliticast group. we select core node that have minimum average cost or PIM-SM protocol is selected. The performance of this method is compared with several other methods by extensive simulations (i.e mean delay, maximum delay, and total cost). Our results shows that this method for Selecting Core is very effective.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.29-40
• /
• 2005

In this paper, we propose a Cluster-based Multicast Routing (CMR) suitable for mobile ad-hoc networks. The main features that our proposed method introduces are the following: a) mobility-based clustering and group based hierarchical structure in order to effectively support stability and scalability, b) group based mesh structure and forwarding tree concepts in order to support the robustness of the mesh topologies which provides limited redundancy and the efficiency of tree forwarding simultaneously, and c) combination of proactive and reactive concepts which provide low route acquisition delay and low overhead. The performance evaluation of the proposed protocol is achieved via modeling and simulation. The corresponding results demonstrate the Proposed multicast protocol's efficiency in terms of packet delivery ratio, scalability, control overhead, end-to-end delay, as a function of mobility, multicast group size, and number of senders.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2477-2487
• /
• 1997

In this paepr, we propose a dynamic multicast routin algorithm for constructing the delay-constrained minimal spanning tree in the VP-based ATM networks, in which we consider the effiiciency enen in the case wheree the destination dynamically joins/departs the multicast connection. For constructing the delay-constrained spanning tree, we frist generate a reduced network consisting of only VCX nodes from a given ATM network, originally consisting of VPX/VCX nodes. Then, we obtain the delay-constrained spanning tree with a minimal tree cost on the reduced network by using our proposed heuristic algorithm. Through numerical examples, we show that our dynamic multicast routing algorithm can provide an efficient usage of network resources when the membership nodes frequently changes during the lifetime of a multicast connection. We also demonstrate the more cost-saving can be expected in dense networks when applyingour proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.493-503
• /
• 2000

Multicast routing algorithms such PIM, CBT, BGMP use shared multicast routing trees and the location of the multicast tree has great impact on the packet delay. In this pater we propose three new center location algorithms and analyze their performance through simulation studies. these three algorithms consider as candidates for the center not only multicast group members but also a few non-members nodes. To select these non-member nodes, we first find all the shortest paths among every couple of members and consider either nodes which are most frequently visited during the process of finding shortest paths or nodes which lie at the center of a shortest path and are most frequently visited during the same process. There the proposed algorithms are able to find the better center than not only algorithms which consider only member nodes but also other algorithms which consider selected non-member nodes in addition ot member nodes. The proposed algorithms either incur too much overhead nor depend upon unicasting algorithms.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.785-788
• /
• 2012

There has been growing interest in multicast technologies for wireless mesh networks with increasing demand for enjoying seamless multimedia broadcast service such as mobile IPTV anytime anywhere for any content on any device. This paper addressed the factors that should be considered when designing multicast algorithm in WMNs. Several routing metrics which are adapted for WMNs based multicast are described in detail to show that the main design goal for multicast metric is to achieve high throughput. Those metrics that take into account the characteristics of WMNs such as wireless broadcast advantage or channel diversity can arrange load balancing more effectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1083-1088
• /
• 2001

In this paper, we propose a new CBT(core-based tree)multicast routing Mechanism by load balancing mechanism. CBT may result in traffic concentration and bottlenecks near the core routers since traffic from all sources nodes the same set of links as approaches the core. So the router have to load packet to new core router for such congestion. Congestion information is given by rtt(round trip time) between designed core router and the other router.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.498-507
• /
• 2001

For the Internet multicast routing, there are some protocols researched. This paper presents a new protocol called DPIM (Delay-bounded PIM) to support QoS of delay in multicast routing. This protocol is based on PIM-SM. When the specified delay bound is not satisfied by dynamic membership, the RP (Rendezvous Point) of shared tree is changed and the shared tree is reconstructed. Therefore, the QoS of delay is always supported in this protocol. Through performance analysis and comparison with other protocol, we certify that this protocol is pertinent.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.154-157
• /
• 2001

In this paper, we propose a new CBT(core-based tree)multicast routing Mechanism by load balancing mechanism. CBT may result in traffice concentration and bottlenecks near the lore routers since traffice from all sources nodes the same set of links as approaches the core. So the router have to load packet to new core router for such congestion. Congestion information is given by rtt(round trip time) between designed core router and the other router.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2626-2634
• /
• 1997

The purpose of multicasting is to reduce the network costs for transmitting the same traffic to multiple destinations. In this paper, an efficient delay-bounded multicasting routing algorithm is proposed, which satistifies the network conditions of cost minimization and can adjust the dynamic events, such as 'leave and/or join ones' from the multicast group. Also, our algorithm is designed for various network requirements such as the efficiet dynamic group support, high-quality data distribution, and adaptability to variable situation. After the delay tolerance and the maximum group size are determined according to network state and requirements for delay and cost, the dynamic delay-bounded multicast tree is constructed using partial multicast routing. We evaluate the performance of the proposed algorithm by running simulations on randomly generated test networks using a Sun Sparc 20 workstation. We were able to obtain good simulation resutls, which means solutions that lies between the minimum cost solution and the minimum delay one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2886-2896
• /
• 1996

The Type of Service based multicast routing algorithm is necessary to support efficiently herogeneous applications in ATM network. In this paper I propose the Constrained Multicast Tree with Virtual Destination(DMTVD) heuristic algorithm as least cost multicast routing algorithm. The service is categorized into two types, as delay sensitive and non in CMTVD algorithm. For the delay sensitive service type, the cost optimized route is the Minimum Cost Stenier Tree connecting all the destination node group, virtual destination node group and source node with least costs, subject to the delay along the path being less than the maximum allowable end to end delay. The other side for the non-delay sensitive service, the cost optimized route is the MCST connecting all the multicast groups with least costs, subject to the traffic load is balanced in the network. The CMTVD algorithm is based on the Constrained Multicasting Tree algorithm but regards the nodes branching multiple destination nodes as virtural destination node. The experimental results show that the total route costs is enhanced 10%-15% than the CTM algorithm.