• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1365-1375
• /
• 2016

One of the most important capabilities for autonomous service robots working in living environments is to recognize and understand the correct context in dynamically changing environment. To generate high-level context knowledge for decision-making from multiple sensory data streams, many technical problems such as multi-modal sensory data fusion, uncertainty handling, symbolic knowledge grounding, time dependency, dynamics, and time-constrained spatio-temporal reasoning should be solved. Considering these problems, this paper proposes an effective dynamic context management and spatio-temporal reasoning method for intelligent service robots. In order to guarantee efficient context management and reasoning, our algorithm was designed to generate low-level context knowledge reactively for every input sensory or perception data, while postponing high-level context knowledge generation until it was demanded by the decision-making module. When high-level context knowledge is demanded, it is derived through backward spatio-temporal reasoning. In experiments with Turtlebot using Kinect visual sensor, the dynamic context management and spatio-temporal reasoning system based on the proposed method showed high performance.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.147-155
• /
• 2007

본 연구는 기술개발 자체의 효과성을 개발된 기술의 시장성, 확대 보급가능성, 민간분야의 기술 로드맵과의 관계성을 도출하는 것으로 실제로 업계에서 다양한 인맥과 프로젝트의 경험을 가지고 있는 자에 의한 심층인터뷰를 근거로 한 정성적 판단과 시장조사를 통한 정량적 판단을 결합하여 멀티센서의 기술개발의 가치를 평가하는 후속 조치에 해당되는 연구이다. 직접적 측면의 산업적 파급효과는 2006년에는 시범적인 수준에서 적용된 사례를 중심으로 정리해 본 결과, 다음과 같이 요약될 수 있다. 첫째, 전문화된 기업의 경우 각자의 강점에 기반을 두어 멀티센서의 적용시장을 바라보고 있다는 점이다. 모든 소프트웨어의 생산을 서버 부분부터 웹 버전, 모바일 버전까지 모두 보유하고 있는 벡터 부분의 GIS 수준과는 달리 위성영상 및 멀티센서 분야의 소프트웨어는 대용량으로 인한 한계로, 서버중심, 웹 중심의 개발이 이루어지고 있으나 모바일 분야까지 확장되지는 않고, 차량항법장치와의 연계를 통한 확장을 꾀하는 수준이라고 요약할 수 있다. 둘째, 전문기업이 아닌 대기업의 시장분석 및 전략에 관한 부분을 요약하자면, 멀티센서와 직접적인 연관을 갖는 회사는 많지 않으나 대체로 U-city 사업 발굴 시 멀티센서가 융합기술이 요소기술로서 기여할 수 있을 것이라는 기대는 하고 있으며, 규모도 1,000억 원 대를 상회할 것으로 바라보고 있다. 셋째, 멀티센서 개발기술의 상용화 및 산업화를 위한 제거 요소 및 감소 요소, 증가 요소 및 새로이 만들어야 할 요소 등을 다차원 전략으로 제시하였으나, 전략을 구사할 기관이 산재되어 있어 제도적 차원의 뒷받침이 기술개발과 더불어 진행되어야 한다는 결론에 이르게 된다. 넷째, 개발된 4개의 기술에 대하여 KVA에서 산출한 기업평가 방식을 변형하여 적용하였는데, 위성영상과 DEM 개발기술이 87% 이상의 점수를 받아 가장 시장성 및 활용성이 높은 기술로 평가되었으며, 초다분광영상에 대한 기술은 70%를 겨우 넘는 수준에서 평가가 되었다. 멀티센서 공간영상정보 통합처리 기술 개발은 다목적 실용위성의 보유, 국가 NGIS 사업의 결과물이 상당히 축척이 되어 있고, 라이다(LiDAR) 기술의 도입을 위한 환경이 조성되었기에 다른 국가에 비해 멀티센서 기술의 적용과 산업화가 가시화 될 수 있을 것으로 기대된다. 그러나 멀티센서 자료의 수급이 용이하지 못하고, 법 제도적인 한계, 시장의 성숙도가 기대이하라는 점 등의 한계를 노정하고 있다.

• Journal of KIISE:Software and Applications
• /
• v.33 no.11
• /
• pp.915-922
• /
• 2006

Recently, the requirements of the embedded software are getting diverse as the diversity of embedded software application fields increases. The systematic development methods are issued to deal with the dependency between hardware and software. However, the existing development methods have not considered the software's close connection to hardware and the high-level reusability for common requirements of several similar domains. In this paper, we propose a design method of development process model of product lines to support an efficient development method for embedded software. For this, we firstly suggest a domain scoping method and an IDEF0(Integration DEFinition)-based business model for extracting the efficient requirements. Next, we present a component deriving method based on the service architecture and an architecture design method after considering the hardware dependency. And we explain the artifacts of MSDFS(Multi Sensor Data Fusion System) at each design step in order to show how the proposed model can be applied to the embedded software development.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.305-316
• /
• 2018

As the urbanization ratio increases, the heat environment in cities is becoming more important due to the urban heat island. In this study, the heat island spatial analysis was calculated and conducted for analysis of urban thermal environment of Sejong city, which was launched in 2012 and has been developed rapidly. To analyze the ratio and change rate of urban area, a multi temporal land cover map (2013 to 2015 and 2017) of study area is generated based on Landsat-8 OLI/TIRS (Operational Land Imager / Thermal Infrared Sensor) satellite imagery. Then, we select an TIR (Thermal Infrared) band from the two TIR bands provided by the Landsat-8, which is used for calculating the heat island potential, through the accuracy evaluation of the brightness temperature and AWS (Automatic Weathering Station) data. Based on the selected band and surface emissivity, land surface temperature is calculated and the estimated heat island potential change is analyzed. As a result, the land surface temperature of the high ratio and change rate of urban area was significantly higher than the surrounding area around $3^{\circ}C$ to $4^{\circ}C$, and the heat island potential was also higher around $4^{\circ}C$ to $5^{\circ}C$. However, the heat island phenomenon was alleviated in urban areas with high rate of change that also show high green area ratio. Therefore, we demonstrated that dense urban area increases the possibility of inducing heat island, but it can mitigate the heat island through green areas.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.989-1006
• /
• 2020

Building change monitoring based on building detection is one of the most important fields in terms of monitoring artificial structures using high-resolution multi-temporal images such as CAS500-1 and 2, which are scheduled to be launched. However, not only the various shapes and sizes of buildings located on the surface of the Earth, but also the shadows or trees around them make it difficult to detect the buildings accurately. Also, a large number of misdetection are caused by relief displacement according to the azimuth and elevation angles of the platform. In this study, object-based building detection was performed using the azimuth angle of the Sun and the corresponding main direction of shadows to improve the results of building change detection. After that, the platform's azimuth and elevation angles were used to detect changed buildings. The object-based segmentation was performed on a high-resolution imagery, and then shadow objects were classified through the shadow intensity, and feature information such as rectangular fit, Gray-Level Co-occurrence Matrix (GLCM) homogeneity and area of each object were calculated for building candidate detection. Then, the final buildings were detected using the direction and distance relationship between the center of building candidate object and its shadow according to the azimuth angle of the Sun. A total of three methods were proposed for the building change detection between building objects detected in each image: simple overlay between objects, comparison of the object sizes according to the elevation angle of the platform, and consideration of direction between objects according to the azimuth angle of the platform. In this study, residential area was selected as study area using high-resolution imagery acquired from KOMPSAT-3 and Unmanned Aerial Vehicle (UAV). Experimental results have shown that F1-scores of building detection results detected using feature information were 0.488 and 0.696 respectively in KOMPSAT-3 image and UAV image, whereas F1-scores of building detection results considering shadows were 0.876 and 0.867, respectively, indicating that the accuracy of building detection method considering shadows is higher. Also among the three proposed building change detection methods, the F1-score of the consideration of direction between objects according to the azimuth angles was the highest at 0.891.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.5
• /
• pp.535-544
• /
• 2016

Even though existing methods for orthophoto production using expensive aircraft are effective in large areas, they are drawbacks when dealing with renew quickly according to geographic features. But, as UAV(Unmanned Aerial Vehicle) technology has advanced rapidly, and also by loading sensors such as GPS and IMU, they are evaluates that these UAV and sensor technology can substitute expensive traditional aerial photogrammetry. Orthophoto production by using UAV has advantages that spatial information of small area can be updated quickly. But in the case of existing researches, images of same altitude are used in orthophoto generation, they are drawbacks about repetition of data and renewal of data. In this study, we targeted about small slope area, and by using low-end UAV, generated orthophoto and DEM(Digital Elevation Model) through different altitudinal images. The RMSE of the check points is σ_h = 0.023m on a horizontal plane and σ_v = 0.049m on a vertical plane. This maximum value and mean RMSE are in accordance with the working rule agreement for the aerial photogrammetry of the National Geographic Information Institute(NGII) on a 1/500 scale digital map. This paper suggests that generate orthophoto of high accuracy using a different altitude images. Reducing the repetition of data through images of different altitude and provide the informations about the spatial information quickly.